From: Uwe Zeisberger <[EMAIL PROTECTED]>
The phy ids used are taken from an driver that used a right shift of 4 to chop
off the revision number. This driver does not shift, so the id and mask
values are wrong and must be left shifted by 4 to actually detect the chips.
Signed-off-by: Uwe Zeisber
From: Dan Faerch <[EMAIL PROTECTED]>
Adds "ethtool command" support to driver. Initially 2 commands are
implemented: force fullduplex and toggle autoneg.
Also added a "disable_autoneg" module argument to completely disable
autoneg on all cards using this driver.
Signed-off-by: Dan Faerch <[EMA
From: Mark Brown <[EMAIL PROTECTED]>
Aculab E1/T1 PMXc cPCI carrier card cards present a natsemi on the cPCI bus
wired up in a non-standard fashion. This patch provides support in the
natsemi driver for these cards by implementing a quirk mechanism and using
that to configure appropriate setting
From: Thibaut VARENE <[EMAIL PROTECTED]>
Fix a problem with Tulip 21142 HP branded PCI cards (PN#: B5509-66001),
which feature a NatSemi DP83840A PHY.
Without that patch, it is impossible to properly initialize the card's PHY,
and it's thus impossible to monitor/configure it.
It's a timing/post
From: Jim Gifford <[EMAIL PROTECTED]>,
Grant Grundler <[EMAIL PROTECTED]>,
Peter Horton <[EMAIL PROTECTED]>
With Grant's help I was able to get the tulip driver to work with 64 bit
MIPS.
Cc: Valerie Henson <[EMAIL PROTECTED]>
[akpm: this is a previously-nacked patch, but the proble
From: Jeremy Fitzhardinge <[EMAIL PROTECTED]>
When transmitting a skb in netpoll_send_skb(), only retry a limited number
of times if the device queue is stopped.
Signed-off-by: Jeremy Fitzhardinge <[EMAIL PROTECTED]>
Acked-by: Matt Mackall <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL
From: "Jari Takkala" <[EMAIL PROTECTED]>
Fix a problem where output from /proc/net/arp skips a record when the full
output does not fit into the users read() buffer.
To reproduce: publish a large number of ARP entries (more than 10 required
on my system). Run 'dd if=/proc/net/arp of=arp-1024.ou
From: Neil Horman <[EMAIL PROTECTED]>
The netpoll system currently has a rx to tx path via:
netpoll_rx
__netpoll_rx
arp_reply
netpoll_send_skb
dev->hard_start_tx
This rx->tx loop places network drivers at risk of inadvertently causing a
deadlock or BUG halt by recursively trying to ac
From: Ben Collins <[EMAIL PROTECTED]>
[UBUNTU:nsc-ircc] Add some IBM think pads
Add Thinkpad T60/X60/Z60/T43/R52 Infrared driver support.
http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=7b8d2713435a9fb69719a282ba75e117f3f76a5b
Cc: Randy Dunlap <[EMAIL PRO
From: <[EMAIL PROTECTED]>
Adapted from http://bugzilla.kernel.org/show_bug.cgi?id=6530
Reschedule the async Tx tasklet if the transmit queue was full.
Cc: Paul Mackerras <[EMAIL PROTECTED]>
[akpm: submitted before, discussion petered off inconclusively]
Signed-off-by: Andrew Morton <[EMAIL PR
From: Andrew Morton <[EMAIL PROTECTED]>
net/atm/mpc.c: In function 'MPOA_res_reply_rcvd':
net/atm/mpc.c:1116: warning: unused variable 'ip'
Cc: chas williams <[EMAIL PROTECTED]>
Cc: "David S. Miller" <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
net/atm/mpc.c |3
[EMAIL PROTECTED] wrote:
From: Uwe Zeisberger <[EMAIL PROTECTED]>
The phy ids used are taken from an driver that used a right shift of 4 to chop
off the revision number. This driver does not shift, so the id and mask
values are wrong and must be left shifted by 4 to actually detect the chips.
* [EMAIL PROTECTED] <[EMAIL PROTECTED]> [2006-06-25 01:45]:
> Cc: Valerie Henson <[EMAIL PROTECTED]>
>
> [akpm: this is a previously-nacked patch, but the problem is real]
And, for the record, Jeff's suggestion as to how to rework the patch:
| Answer hasn't changed since this was last discussed:
On Sun, 25 Jun 2006 05:15:29 -0400
Jeff Garzik <[EMAIL PROTECTED]> wrote:
> [EMAIL PROTECTED] wrote:
> > From: Uwe Zeisberger <[EMAIL PROTECTED]>
> >
> > The phy ids used are taken from an driver that used a right shift of 4 to
> > chop
> > off the revision number. This driver does not shift, s
[EMAIL PROTECTED] writes:
> From: <[EMAIL PROTECTED]>
>
> Adapted from http://bugzilla.kernel.org/show_bug.cgi?id=6530
>
> Reschedule the async Tx tasklet if the transmit queue was full.
>
> Cc: Paul Mackerras <[EMAIL PROTECTED]>
>
> [akpm: submitted before, discussion petered off inconclusiv
On Fri, 2006-06-23 at 18:56 -0400, Luis R. Rodriguez wrote:
> Thanks Larry -- I'm sorry for not mentioning in the original thread
> but basically miniPCI and USB is what we can slap onto our nodes so
> far. We'll have to figure something out for Cardbus.. I searched and
> it seems there some mini
On 6/25/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
From: Thibaut VARENE <[EMAIL PROTECTED]>
Fix a problem with Tulip 21142 HP branded PCI cards (PN#: B5509-66001),
which feature a NatSemi DP83840A PHY.
Without that patch, it is impossible to properly initialize the card's PHY,
and it's t
[EMAIL PROTECTED] wrote:
>
> [akpm: submitted before, discussion ended inconclusively, iirc]
> Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
I still need to try to reproduce this. I might be able to allocate some
time on this soon.
Cheers,
--
Visit Openswan at http://www.openswan.org/
Email
skb_find_text takes a "to" argument which is supposed to limit how
far into the skb it will search for the given text. At present,
it seems to ignore that argument on the first skb, and instead
return a match even if the text occurs beyond the limit.
Patch below fixes this, after adjusting for th
On 6/25/06, Johannes Berg <[EMAIL PROTECTED]> wrote:
On Fri, 2006-06-23 at 18:56 -0400, Luis R. Rodriguez wrote:
> Thanks Larry -- I'm sorry for not mentioning in the original thread
> but basically miniPCI and USB is what we can slap onto our nodes so
> far. We'll have to figure something out f
[ resent with a subject adapted to vger mail filter... ]
On Sat, Jun 24, 2006 at 06:19:14AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.17-mm1:
>...
> +qla3xxx-NIC-driver.patch
>...
> Net driver updates. Includes a new driver from qlogic which almost compiles.
>...
The QLA3XXX_NAPI opt
Commit 4a31e348e3ecaf54c50240109ac4574b180f8840 added an
EXPORT_SYMBOL(hdlc_setup) with the justification
hdlc_setup() is now EXPORTed as per David's request.
Is a usage of this export pending for the near future or could this
export be reverted until a user is submitted for inclusion?
TIA
A
I understand the saying "beggars can't be choosers", but I have heard nothing on
this issue since June 19th. Does anyone have any ideas on what is going on? Is
there more information I can collect that would help diagnose this problem? And
again, thanks for any and all help!
--
Dr. Harry Ed
Hi Andi,
On Mon, Jun 19, 2006 at 05:24:31PM +0200, Andi Kleen wrote:
>
> > If you use "pmtmr" try to reboot with kernel option "clock=tsc".
>
> That's dangerous advice - when the system choses not to use
> TSC it often has a reason.
>
> >
> > On my Opteron AMD system i normally can route 400 k
Fix 2 problems in dev_hard_start_xmit():
1. nskb->next needs to link back to skb->next if hard_start_xmit()
returns non-zero.
2. Since the total number of GSO fragments may exceed MAX_SKB_FRAGS + 1,
it needs to stop transmitting if the netif_queue is stopped.
Signed-off-by: Michael Chan <[EMAIL
netdev_nit can now become static.
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
---
include/linux/netdevice.h |1 -
net/core/dev.c|2 +-
2 files changed, 1 insertion(+), 2 deletions(-)
--- linux-2.6.17-mm2-full/include/linux/netdevice.h.old 2006-06-25
23:30:55.0 +
On Sun, Jun 25, 2006 at 10:31:08AM +0100, Martin Michlmayr wrote:
> * [EMAIL PROTECTED] <[EMAIL PROTECTED]> [2006-06-25 01:45]:
> > Cc: Valerie Henson <[EMAIL PROTECTED]>
> >
> > [akpm: this is a previously-nacked patch, but the problem is real]
ia64 and parisc need the changes to tulip_select_me
On Sun, Jun 25, 2006 at 03:38:05PM -0700, Michael Chan wrote:
> Fix 2 problems in dev_hard_start_xmit():
>
> 1. nskb->next needs to link back to skb->next if hard_start_xmit()
> returns non-zero.
>
> 2. Since the total number of GSO fragments may exceed MAX_SKB_FRAGS + 1,
> it needs to stop trans
On Fri, 2006-06-23 at 17:21 +0200, Patrick McHardy wrote:
> Not really. The randomization doesn't happen by default, but it doesn't
> influence this anyway. SFQ allows flows to send up to "quantum" bytes
> at a time before moving on to the next one. A flow that sends 75 * 20
> byte will in the eye
With the bcm43xx periodic work patches that recently made it into
Linus's tree, my PowerBook does not survive running overnight.
Yesterday I reverted
91769e7dd9cef7988dc4280f74ed168351beb5b8 [PATCH] bcm43xx: preemptible periodic
work
78ff56a06edc3407996173daf63e48f6b90c7062 [PATCH] bcm43xx: rede
The current version of bcm43xx-softmac uses local routines to check if a channel is valid. As noted
in the comments, these routines do not take any regulatory information into account. This patch
converts the code to use the equivalent routine in ieee80211, which is being converted to know about
The cirrus ep93xx is an ARM SoC that includes an ethernet MAC --
this patch adds a driver for that ethernet MAC.
Signed-off-by: Lennert Buytenhek <[EMAIL PROTECTED]>
(This is, unfortunately, probably too late for 2.6.18, so I'm sending
it just for feedback.)
Index: linux-2.6.17-git5/drivers/net/
On Sun, 25 Jun 2006, Harry Edmon wrote:
> I understand the saying "beggars can't be choosers", but I have heard nothing
> on
> this issue since June 19th. Does anyone have any ideas on what is going on?
> Is
> there more information I can collect that would help diagnose this problem?
> An
On 25/06/2006 12:13 AM, jamal wrote:
You can actually stop reading here if you have gathered the view at
this point that i am not objecting to the simple approach Patrick is
going with...
Perhaps this is my problem. I am not sure I understand
what Patrick is proposing. I can wait for his patc
> I encountered the same problem on a dual core opteron equipped with a
> broadcom NIC (tg3) under 2.4. It could receive 1 Mpps when using TSC
> as the clock source, but the time jumped back and forth, so I changed
> it to 'notsc', then the performance dropped dramatically to around the
> same val
[Resent because I forgot to copy netdev on my answer]
I asked Krzysztof to export that so that I could use it
in a re-written driver for LMC WAN cards which I put out
for comments on netdev in March.
I have incorporated the comments from the March posting and
intend to repost the new driver very
Hello Kiran,
On Fri, 23 Jun 2006 19:19:00 -0700
Kiran Thota <[EMAIL PROTECTED]> wrote:
>
> - Based on linux-2.6.12 from
> http://www.linux-mips.org/pub/linux/mips/kernel/v2.6/linux-2.6.12.tar.gz
> - Rewritten clean driver for PMC MSP85x0 gigabit ethernet driver (planning a
> rewritten titan d
From: Per Liden <[EMAIL PROTECTED]>
Date: Thu, 22 Jun 2006 13:14:46 +0200 (CEST)
> Patches can be pulled from:
>
> git://tipc.cslab.ericsson.net/pub/git/tipc.git
Since this would not merge cleanly into Linus's current tree,
I applied all of the patches by hand.
Thanks a lot.
-
To unsubscr
From: "Michael Chan" <[EMAIL PROTECTED]>
Date: Fri, 23 Jun 2006 20:08:41 -0700
> On Sat, 2006-06-24 at 09:53 +1000, Herbert Xu wrote:
>
> > Nevermind, I obviously complete ignored your other fix to the length of
> > the last segment :) Here is a fixed version.
> >
> > [NET]: Fix CHECKSUM_HW GSO
From: Herbert Xu <[EMAIL PROTECTED]>
Date: Mon, 26 Jun 2006 09:36:02 +1000
> On Sun, Jun 25, 2006 at 03:38:05PM -0700, Michael Chan wrote:
> > Fix 2 problems in dev_hard_start_xmit():
> >
> > 1. nskb->next needs to link back to skb->next if hard_start_xmit()
> > returns non-zero.
> >
> > 2. Sinc
From: Adrian Bunk <[EMAIL PROTECTED]>
Date: Mon, 26 Jun 2006 01:13:27 +0200
> netdev_nit can now become static.
>
> Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
Applied, thanks Adrian.
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTEC
41 matches
Mail list logo