From: Yuval Mintz
When removing the offloading of mirred actions under
matchall classifiers, mlxsw would find the destination port
associated with the offloaded action and utilize it for undoing
the configuration.
Depending on the order by which ports are removed, it's possible that
the destinat
On 9/11/2017 8:53 PM, Eric Dumazet wrote:
On Mon, 2017-09-11 at 20:12 -0700, Tom Herbert wrote:
Two ints in sock_common for this purpose is quite expensive and the
use case for this is limited-- even if a RX->TX queue mapping were
introduced to eliminate the queue pair assumption this still w
Hi,
In the scenario, tcp server side IP changed, and at that memont,
userspace application still send data continuously;
tcp_send_head(sk)'s timestamp always be refreshed.
Here is the packetdrill script:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR,
On Mon, Sep 11, 2017 at 12:56 PM, Christophe JAILLET
wrote:
> All other error handling paths in this function go through the 'error'
> label. This one should do the same.
>
> Fixes: 9cc9a5cb176c ("datapath: Avoid using stack larger than 1024.")
> Signed-off-by: Christophe JAILLET
> ---
> I think
On Thu, Sep 07, 2017 at 06:29:00PM -0700, Vinicius Costa Gomes wrote:
> >> * Time-aware shaper (802.1Qbv):
> >>
> >>The idea we are currently exploring is to add a "time-aware", priority
> >> based
> >>qdisc, that also exposes the Tx queues available and provides a
> >> mechanism for
> >
On Mon, 2017-09-11 at 20:12 -0700, Tom Herbert wrote:
> Two ints in sock_common for this purpose is quite expensive and the
> use case for this is limited-- even if a RX->TX queue mapping were
> introduced to eliminate the queue pair assumption this still won't
> help if the receive and transmit i
The purpose of vxlan arp reduce feature is to reply the boardcast
arp request in vtep instead of sending it out to save traffic.
The current implemention drops arp packet, if the ip cannot be
found in neigh table. In the case of virtual IP address, user
defines IP address without management from S
On Thu, Aug 31, 2017 at 4:27 PM, Sridhar Samudrala
wrote:
> This patch introduces a new socket option SO_SYMMETRIC_QUEUES that can be used
> to enable symmetric tx and rx queues on a socket.
>
> This option is specifically useful for epoll based multi threaded workloads
> where each thread handles
This improvement is good. But I have a concern that
the parameters of idr_alloc and idr_alloc_ul are different.
I mean in idr_alloc, we have start and end.
In our new API, we keep them. So our design goal is to
make them consistent. Your new API has its advantage surely.
If you want to change it,
Hi Himanshu,
> -Original Message-
> From: Himanshu Jha [mailto:himanshujha199...@gmail.com]
> Sent: 2017年9月11日 20:46
> To: amitkar...@gmail.com
> Cc: Nishant Sarmukadam ; Ganapathi Bhat
> ; Xinming Hu ;
> kv...@codeaurora.org; linux-wirel...@vger.kernel.org;
> netdev@vger.kernel.org; Hima
> From: netdev-ow...@vger.kernel.org [mailto:netdev-
> ow...@vger.kernel.org] On Behalf Of Kardonik Michael
> Sent: Tuesday, September 5, 2017 1:27 PM
> To: leoyang...@nxp.com; michael.kardo...@nxp.com; Kirsher, Jeffrey T
> ; Brandeburg, Jesse
> ; Shannon Nelson
> ; Wyborny, Carolyn
> ; Skidmore, D
Dummy device name is enumerated by the kernel, let user space be aware
of the naming scheme used by dummy devices:
(visible in /sys/class/net//name_assign_type).
Signed-off-by: Zhang Shengju
---
drivers/net/dummy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/d
On Sun, Sep 10, 2017 at 7:03 AM, Jiri Pirko wrote:
> Sat, Sep 09, 2017 at 08:46:42PM CEST, xiyou.wangc...@gmail.com wrote:
>>On Thu, Sep 7, 2017 at 7:18 PM, David Miller wrote:
>>>
>>> This doesn't apply cleanly any more, please respin.
>>>
>>
>>Sigh, you applied this patch despite of strong obje
This patchset fixes tc filter chain reference counting and nasty race
conditions with RCU callbacks. Please see each patch for details.
---
v3: Rebase on the latest -net
Add code comment in patch 1
Improve comment and changelog for patch 2
Add patch 3
v2: Add patch 1
Get rid of m
gen estimator has been rewritten in commit 1c0d32fde5bd
("net_sched: gen_estimator: complete rewrite of rate estimators"),
the caller is no longer needed to wait for a grace period.
So this patch gets rid of it.
This also completely closes a race condition between action free
path and filter chain
As pointed out by Jiri, there is still a race condition between
tcf_block_put() and tcf_chain_destroy() in a RCU callback. There
is no way to make it correct without proper locking or synchronization,
because both operate on a shared list.
Locking is hard, because the only lock we can pick here is
This patch fixes the following ugliness of tc filter chain refcnt:
a) tp proto should hold a refcnt to the chain too. This significantly
simplifies the logic.
b) Chain 0 is no longer special, it is created with refcnt=1 like any
other chains. All the ugliness in tcf_chain_put() can be gone!
From: Eric Dumazet
Back in linux-4.4, I inadvertently put a call to reqsk_put() in
inet_child_forget(), forgetting it could be called from two different
points.
In the case it is called from inet_csk_reqsk_queue_add(), we want to
keep the reference on the request socket, since it is released lat
On Mon, Sep 11, 2017 at 3:07 PM, Tom Herbert wrote:
> On Mon, Sep 11, 2017 at 9:49 AM, Samudrala, Sridhar
> wrote:
>> On 9/10/2017 8:19 AM, Tom Herbert wrote:
>>>
>>> On Thu, Aug 31, 2017 at 4:27 PM, Sridhar Samudrala
>>> wrote:
This patch introduces a new socket option SO_SYMMETRIC_QU
Benoit Panizzon :
[...]
> It's not marked as fixed but:
>
> when I try to turn offloading off I get:
>
> # /sbin/ethtool -K eth0 rx-vlan-offload off
> ethtool: bad command line argument(s)
> For more information run ethtool -h
>
> Could anyone give me a hint how to further debug the problem or
Another test for this patch with linux-next tree
with patch:
bwm-ng v0.6.1 (probing every 1.000s), press 'h' for help
input: /proc/net/dev type: rate
- iface Rx Tx Total
==
On Mon, Sep 11, 2017 at 9:49 AM, Samudrala, Sridhar
wrote:
> On 9/10/2017 8:19 AM, Tom Herbert wrote:
>>
>> On Thu, Aug 31, 2017 at 4:27 PM, Sridhar Samudrala
>> wrote:
>>>
>>> This patch introduces a new socket option SO_SYMMETRIC_QUEUES that can be
>>> used
>>> to enable symmetric tx and rx que
On Mon, 2017-09-11 at 17:43 -0400, Shankara Pailoor wrote:
> Hi Eric,
>
> I applied your patch and I no longer observed the warning. Thanks! I
> will let you know if any further problems show up during fuzzing.
Great, I also verified this fixed the problem, I will send the official
patch shortly
On Mon, Sep 11, 2017 at 2:14 PM, Cong Wang wrote:
>
> Looks like all due to the lack of locking on block->chain_list.
> I thought the rcu_barrier() could properly handle this,
> but seems still not, probably I need to move it in the loop,
> I am still not 100% sure if it is totally safe with
> lis
Hi Eric,
I applied your patch and I no longer observed the warning. Thanks! I
will let you know if any further problems show up during fuzzing.
Regards,
Shankara
On Sun, Sep 10, 2017 at 11:34 PM, Eric Dumazet wrote:
> On Fri, 2017-09-08 at 11:46 -0700, Eric Dumazet wrote:
>> On Fri, 2017-09-08
From: Josh Hunt
Date: Sun, 10 Sep 2017 15:48:50 -0400
> Fixes sparse warning about pointer in gen_handle:
> net/sched/cls_rsvp.h:392:40: warning: Using plain integer as NULL pointer
>
> Fixes: 8113c095672f6 ("net_sched: use void pointer for filter handle")
> Signed-off-by: Josh Hunt
Applied.
From: David Lebrun
Date: Sun, 10 Sep 2017 14:22:01 +0100
> From: David Lebrun
>
> As seg6_validate_srh() already checks that the Routing Header type is
> correct, it is not necessary to do it again in get_srh().
>
> Fixes: 5829d70b ("ipv6: sr: fix get_srh() to comply with IPv6 standard "RFC
>
From: Jesper Dangaard Brouer
Date: Sun, 10 Sep 2017 09:47:02 +0200
> Using bpf_redirect_map is allowed for generic XDP programs, but the
> appropriate map lookup was never performed in xdp_do_generic_redirect().
>
> Instead the map-index is directly used as the ifindex. For the
> xdp_redirect_m
From: Matthew Wilcox
Date: Mon, 11 Sep 2017 14:14:08 -0700
> I really don't like your new API. I wish you'd discussed it before
> merging it.
If I recall correctly, linux-kernel was CC:'d and nobody engaged.
I could be wrong, and if I am then my bad, I should have enforced that.
Thanks.
From: Thomas Meyer
Date: Sat, 9 Sep 2017 05:18:19 +0200
> @@ -168,6 +169,18 @@ static struct name_seq *tipc_nameseq_create(u32 type,
> struct hlist_head *seq_hea
> return nseq;
> }
>
> +static int nameseq_find_subseq_cmp(const void *key, const void *elt)
> +{
> + u32 instance = *(u
From: Yonghong Song
Date: Thu, 7 Sep 2017 18:36:15 -0700
> clang does not support variable length array for structure member.
> It has the following error during compilation:
>
> kernel/trace/trace_syscalls.c:568:17: error: fields must have a constant size:
> 'variable length array in structure'
From: Kosuke Tatsukawa
Date: Wed, 6 Sep 2017 22:47:59 +
> Commit cbf5ecb30560 ("net: bonding: Fix transmit load balancing in
> balance-alb mode") tried to fix transmit dynamic load balancing in
> balance-alb mode, which wasn't working after commit 8b426dc54cf4
> ("bonding: remove hardcoded va
From: Stephen Hemminger
Date: Wed, 6 Sep 2017 13:53:05 -0700
> When a virtual device is added dynamically (via host console), then
> the vmbus sends an offer message for the primary channel. The processing
> of this message for networking causes the network device to then
> initialize the sub ch
From: Stephen Hemminger
Date: Wed, 6 Sep 2017 13:53:06 -0700
> Only need to wakeup the initiator after all sub-channels
> are opened.
>
> Signed-off-by: Stephen Hemminger
Applied.
On Sun, Sep 10, 2017 at 7:33 AM, Jiri Pirko wrote:
> Fri, Sep 08, 2017 at 06:37:55PM CEST, xiyou.wangc...@gmail.com wrote:
>>On Thu, Sep 7, 2017 at 1:52 PM, Jiri Pirko wrote:
>>> Thu, Sep 07, 2017 at 07:45:49PM CEST, xiyou.wangc...@gmail.com wrote:
Yes it is for chain 0, because block holds a
I really don't like your new API. I wish you'd discussed it before
merging it. Here's my redesign. Does anybody have a suggestion for
improvement?
We have a lovely new test-suite for the IDR (in tools/testing/radix-tree)
... when adding a new API, it's polite to update the test-suite too.
Do y
On Wed, Aug 30, 2017 at 03:55:52PM +0530, Jassi Brar wrote:
> This patch adds documentation for Device-Tree bindings for the
> Socionext NetSec Controller driver.
>
> Signed-off-by: Jassi Brar
> ---
> .../devicetree/bindings/net/socionext-netsec.txt | 46
> ++
> 1 file cha
On Mon, Sep 11, 2017 at 06:51:49PM +, nisar.sa...@microchip.com wrote:
> From: Nisar Sayed
>
> Fix for eeprom read/write when device auto suspend
>
> Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000
> Ethernet device driver")
> Signed-off-by: Nisar Sayed
> ---
> dri
> Even with CLK_BUS_EPHY/RST_BUS_EPHY enabled, the MAC reset timeout.
> So no the CLK/RST are really for the PHY.
Thanks for trying that.
You said it was probably during scanning of the bus it times out. What
address is causing the timeout? 0 or 1? If the internal bus can only
have one PHY on it,
Nisar,
>@@ -1290,8 +1290,8 @@ static int lan78xx_ethtool_set_eeprom(struct net_device
>*netdev,
>
>/* Allow entire eeprom update only */
>if ((ee->magic == LAN78XX_EEPROM_MAGIC) &&
>- (ee->offset == 0) &&
>- (ee->len == 512) &&
>+ (ee->offset >= 0 &&
All other error handling paths in this function go through the 'error'
label. This one should do the same.
Fixes: 9cc9a5cb176c ("datapath: Avoid using stack larger than 1024.")
Signed-off-by: Christophe JAILLET
---
I think that the comment above the function could be improved. It looks
like the c
Hi Jozsef,
Thank you. Yes, that is true, the count can still be incorrect in the
case of a huge set.
Thanks,
Vishwanath
On 09/11/2017 03:36 PM, Jozsef Kadlecsik wrote:
> Hi,
>
> Your patch is applied in the ipset git tree and I'm going to push it for
> kernel inclusion.
>
> I modified the com
Hi,
Your patch is applied in the ipset git tree and I'm going to push it for
kernel inclusion.
I modified the comment part: the elements counter can still be incorrect
in the case of a huge set, because elements might time out during the
listing.
Thanks for your patience!
Best regards,
Jozse
Please use a proper Subject subsystem prefix for openvswitch patches.
"datapath" isn't very specific in the global kernel namespace at all.
The entire networking stack packet processing path is a "datapath"
"openvswitch: " would have been much better.
All other error handling paths in this function go through the 'error'
label. This one should do the same.
Fixes: 9cc9a5cb176c ("datapath: Avoid using stack larger than 1024.")
Signed-off-by: Christophe JAILLET
---
I think that the comment above the function could be improved. It looks
like the c
On Mon, Sep 11, 2017 at 06:11:24PM +0200, Andrew Lunn wrote:
> On Fri, Sep 08, 2017 at 04:28:25PM +0200, Corentin Labbe wrote:
> > On Fri, Sep 08, 2017 at 04:17:36PM +0200, Andrew Lunn wrote:
> > > > > Do you know why the reset times out/fails?
> > > > >
> > > >
> > > > Because there are nothing
From: Nisar Sayed
Allow EEPROM write for less than MAX_EEPROM_SIZE
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000
Ethernet device driver")
Signed-off-by: Nisar Sayed
---
drivers/net/usb/lan78xx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/
From: Nisar Sayed
Use default value loaded from EEPROM/OTP when resetting
The LAN78xx allows platform configurations to be loaded from EEPROM/OTP.
Ex: When external phy is connected, the MAC can be configured to
have speed, duplex, polarity configurations loadded from the EEPROM/OTP.
Fixes: 55d
From: Nisar Sayed
Fix for eeprom read/write when device auto suspend
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000
Ethernet device driver")
Signed-off-by: Nisar Sayed
---
drivers/net/usb/lan78xx.c | 22 ++
1 file changed, 18 insertions(+), 4 delet
From: Nisar Sayed
This series of patches are for lan78xx driver.
These patches fixes potential issues associated with lan78xx driver
v2
- Added patch version information
- Added fixes tag
- Updated patch description
- Updated changes as per comments
v1
- Spitted patches as per comments
- Dropp
On Sun, Sep 10, 2017 at 12:48 PM, Josh Hunt wrote:
> Fixes sparse warning about pointer in gen_handle:
> net/sched/cls_rsvp.h:392:40: warning: Using plain integer as NULL pointer
>
> Fixes: 8113c095672f6 ("net_sched: use void pointer for filter handle")
> Signed-off-by: Josh Hunt
Acked-by: Cong
On Mon, Sep 11, 2017 at 9:48 AM, Samudrala, Sridhar
wrote:
>
>
> On 9/9/2017 6:28 PM, Alexander Duyck wrote:
>>
>> On Thu, Aug 31, 2017 at 4:27 PM, Sridhar Samudrala
>> wrote:
>>>
>>> This patch introduces a new socket option SO_SYMMETRIC_QUEUES that can be
>>> used
>>> to enable symmetric tx and
From: Nisar Sayed
Configure pause time to 0x when tx flow control enabled
Set pause time to 0x in the pause frame to indicate the
partner to stop sending the packets. When RX buffer frees up,
the device sends pause frame with pause time zero for partner to
resume transmission.
Fixes: 2f
From: Jiri Pirko
Date: Mon, 11 Sep 2017 09:42:26 +0200
> From: Arkadi Sharshevsky
>
> The current code does not handle correctly the access to the upper page
> in case of SFP/SFP+ EEPROM. In that case the offset should be local
> and the I2C address should be changed.
>
> Fixes: 2ea109039cd3 (
From:
Date: Mon, 11 Sep 2017 17:05:13 +0300
> From: Ariel Elior
>
> Remove Yuval from maintaining the bnx2x & qed* modules as he is no longer
> working for the company. Thanks Yuval for your huge contributions and
> tireless efforts over the many years and various companies.
>
> Ariel
All pat
> On Mon, Sep 11, 2017 at 12:32:10PM +, nisar.sa...@microchip.com
> wrote:
> > From: Nisar Sayed
> >
> > Configure pause time to 0x when tx flow control enabled
> >
> > Set pause time to 0x in the pause frame to indicate the partner to
> > stop sending the packets. When RX buffer frees
On Sun, Sep 10, 2017 at 4:45 AM, Xin Long wrote:
> On Sat, Sep 9, 2017 at 7:35 AM, Cong Wang wrote:
>> On Tue, Sep 5, 2017 at 8:53 PM, Xin Long wrote:
>>> Now there is no lock protecting nlk ngroups/groups' accessing in
>>> netlink bind and getname. It's safe from nlk groups' setting in
>>> netl
From: Kishon Vijay Abraham I
Date: Mon, 11 Sep 2017 12:54:47 +0530
> On Saturday 09 September 2017 09:39 AM, David Miller wrote:
>> Yeah let's sort this out before I apply this fix to my tree.
>
> I'll take this fix in linux-phy tree after -rc1 is tagged if that's okay with
> you.
No problem,
Mon, Sep 11, 2017 at 03:58:26PM CEST, and...@lunn.ch wrote:
>On Mon, Sep 11, 2017 at 09:42:26AM +0200, Jiri Pirko wrote:
>> From: Arkadi Sharshevsky
>>
>> The current code does not handle correctly the access to the upper page
>> in case of SFP/SFP+ EEPROM. In that case the offset should be local
Tested with connectx-5
Without patch
10Mpps - > 16 cores used
PerfTop: 66258 irqs/sec kernel:99.3% exact: 0.0% [4000Hz
cycles], (all, 32 CPUs)
--
On 9/10/2017 8:19 AM, Tom Herbert wrote:
On Thu, Aug 31, 2017 at 4:27 PM, Sridhar Samudrala
wrote:
This patch introduces a new socket option SO_SYMMETRIC_QUEUES that can be used
to enable symmetric tx and rx queues on a socket.
This option is specifically useful for epoll based multi threaded
On 9/9/2017 6:28 PM, Alexander Duyck wrote:
On Thu, Aug 31, 2017 at 4:27 PM, Sridhar Samudrala
wrote:
This patch introduces a new socket option SO_SYMMETRIC_QUEUES that can be used
to enable symmetric tx and rx queues on a socket.
This option is specifically useful for epoll based multi thre
On 11 September 2017 19:07:33 EEST, "Mahesh Bandewar (महेश बंडेवार)"
wrote:
>On Sat, Sep 9, 2017 at 4:28 AM, Nikolay Aleksandrov
> wrote:
>> On 07/09/17 01:47, Kosuke Tatsukawa wrote:
>>> Commit cbf5ecb30560 ("net: bonding: Fix transmit load balancing in
>>> balance-alb mode") tried to fix transm
On Fri, Sep 08, 2017 at 04:28:25PM +0200, Corentin Labbe wrote:
> On Fri, Sep 08, 2017 at 04:17:36PM +0200, Andrew Lunn wrote:
> > > > Do you know why the reset times out/fails?
> > > >
> > >
> > > Because there are nothing connected to it.
> >
> > That should not be an issue. A read should just
On Sat, Sep 9, 2017 at 4:28 AM, Nikolay Aleksandrov
wrote:
> On 07/09/17 01:47, Kosuke Tatsukawa wrote:
>> Commit cbf5ecb30560 ("net: bonding: Fix transmit load balancing in
>> balance-alb mode") tried to fix transmit dynamic load balancing in
>> balance-alb mode, which wasn't working after commit
On Mon, 2017-09-11 at 08:13 -0700, Eric Dumazet wrote:
> You can see we got only 3 probes, not 4.
Here is complete packetdrill test showing that code behaves as expected.
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ...,
On Mon, 2017-09-11 at 07:49 -0700, Eric Dumazet wrote:
> On Mon, 2017-09-11 at 14:27 +0800, liujia...@huawei.com wrote:
> > From: liujian
> >
> > After the tcp socket go to ESTABLISHED stat, change IP address (server
> > side),
> > then the tcp socket will go tcp_probe_timer process.
> >
> > [ro
On Mon, 2017-09-11 at 14:27 +0800, liujia...@huawei.com wrote:
> From: liujian
>
> After the tcp socket go to ESTABLISHED stat, change IP address (server
> side),
> then the tcp socket will go tcp_probe_timer process.
>
> [root@localhost net]# netstat -toe
> Active Internet connections (w/o serv
From: Ariel Elior
Remove Yuval from maintaining the bnx2x & qed* modules as he is no longer
working for the company. Thanks Yuval for your huge contributions and
tireless efforts over the many years and various companies.
Ariel
---
MAINTAINERS | 2 --
1 file changed, 2 deletions(-)
diff --git
On Mon, Sep 11, 2017 at 12:32:10PM +, nisar.sa...@microchip.com wrote:
> From: Nisar Sayed
>
> Configure pause time to 0x when tx flow control enabled
>
> Set pause time to 0x in the pause frame to indicate the
> partner to stop sending the packets. When RX buffer frees up,
> the dev
On Mon, Sep 11, 2017 at 09:42:26AM +0200, Jiri Pirko wrote:
> From: Arkadi Sharshevsky
>
> The current code does not handle correctly the access to the upper page
> in case of SFP/SFP+ EEPROM. In that case the offset should be local
> and the I2C address should be changed.
Shame you cannot/didn'
Mon, Aug 28, 2017 at 07:40:33PM CEST, michael.c...@broadcom.com wrote:
>From: Sathya Perla
>
>This patch adds support for offloading TC based flow
>rules and actions for the 'flower' classifier in the bnxt_en driver.
>It includes logic to parse flow rules and actions received from the
>TC subsyste
Use common library function rather than explicitly coding
some variant of it yourself.
Signed-off-by: Thomas Meyer
---
net/tipc/name_table.c | 30 +++---
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/net/tipc/name_table.c b/net/tipc/name_table.c
index bd
call to memset to assign 0 value immediately after allocating
memory with kzalloc is unnecesaary as kzalloc allocates the memory
filled with 0 value.
Semantic patch used to resolve this issue:
@@
expression e,e2; constant c;
statement S;
@@
e = kzalloc(e2, c);
if(e == NULL) S
- memset(e, 0,
> > > +static irqreturn_t ave_interrupt(int irq, void *netdev)
> > > +{
> > > + struct net_device *ndev = (struct net_device *)netdev;
> > > + struct ave_private *priv = netdev_priv(ndev);
> > > + u32 gimr_val, gisr_val;
> > > +
> > > + gimr_val = ave_irq_disable_all(ndev);
> > > +
> > > + /* get i
From: Nisar Sayed
Configure pause time to 0x when tx flow control enabled
Set pause time to 0x in the pause frame to indicate the
partner to stop sending the packets. When RX buffer frees up,
the device sends pause frame with pause time zero for partner to
resume transmission.
Signed-of
I NEED YOUR ASSISTANCE INTO THIS TRANSACTION
Hi David,
Do you plan to send a v3?
On 21/08/2017 18:15, David Lamparter wrote:
Hi all,
this is an update on the earlier "[RFC net-next] VPLS support". Note
I've changed the subject lines on some of the patches to better reflect
what they really do (tbh the earlier subject lines were crap.)
2017-09-08 22:48 GMT+03:00 :
>> -Original Message-
>> From: Maxim Uvarov [mailto:muva...@gmail.com]
>> Sent: Friday, September 08, 2017 12:00 PM
>> To: Florian Fainelli
>> Cc: Tristram Ha - C24268; Andrew Lunn; Pavel Machek; Nathan Conrad; Vivien
>> Didelot; netdev; linux-ker...@vger.kerne
Hi Andrew,
Thank your for reviewing.
On Sat, 9 Sep 2017 17:55:17 +0200 wrote:
> On Sat, Sep 09, 2017 at 09:03:05AM +0530, Jassi Brar wrote:
> > On 9 September 2017 at 00:21, Florian Fainelli wrote:
> > > On 09/08/2017 06:02 AM, Kunihiko Hayashi wrote:
> > >> From: Jassi Brar
> > >>
> > >> Add
From: Arkadi Sharshevsky
The current code does not handle correctly the access to the upper page
in case of SFP/SFP+ EEPROM. In that case the offset should be local
and the I2C address should be changed.
Fixes: 2ea109039cd3 ("mlxsw: spectrum: Add support for access cable info via
ethtool")
Repo
Hi,
On Saturday 09 September 2017 09:39 AM, David Miller wrote:
> From: Dan Carpenter
> Date: Fri, 8 Sep 2017 13:31:37 +0300
>
>> devm_ioremap_resource() never returns NULL, it only returns error
>> pointers so this test needs to be changed.
>>
>> Fixes: d0438bd6aa09 ("phy: add the mvebu cp110 c
Hi Phil and Michal,
On Fri, Sep 08, 2017 at 04:51:13PM +0200, Phil Sutter wrote:
> Hi,
>
> On Fri, Sep 08, 2017 at 10:01:31PM +0800, Hangbin Liu wrote:
> [...]
> > Since we have to use two static bufffers. So how about check like
> >
> > if (len > strlen(buffer))
>
> I don't think that will
Hi Florian,
On Fri, 8 Sep 2017 11:54:31 -0700 wrote:
> On 09/08/2017 06:02 AM, Kunihiko Hayashi wrote:
> > DT bindings for the AVE ethernet controller found on Socionext's
> > UniPhier platforms.
> >
> > Signed-off-by: Kunihiko Hayashi
> > Signed-off-by: Jassi Brar
> > ---
> > .../bindings/n
Hi Andrew,
On Fri, 8 Sep 2017 16:03:22 +0200 wrote:
> > + eth: ethernet@6500 {
> > + compatible = "socionext,uniphier-ave4";
> > + reg = <0x6500 0x8500>;
> > + interrupts = <0 66 4>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&
85 matches
Mail list logo
