this memory
is real.
Detected by CoverityScan, CID#1399632 ("Uninitialized scalar variable")
Signed-off-by: Robert Foss
---
drivers/net/ethernet/qlogic/qed/qed_ll2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c
b/drive
this memory
is real.
Detected by CoverityScan, CID#1399632 ("Uninitialized scalar variable")
Signed-off-by: Robert Foss
---
drivers/net/ethernet/qlogic/qed/qed_ll2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c
b/drive
On 2016-09-06 12:41 PM, Grant Grundler wrote:
On Thu, Sep 1, 2016 at 10:02 AM, Eric Dumazet wrote:
On Thu, 2016-09-01 at 12:47 -0400, Robert Foss wrote:
I'm not quite sure how the first From line was added, it
should not have been.
Grant Grundler is most definitely the author.
Woul
On 2016-09-01 12:43 PM, Eric Dumazet wrote:
On Mon, 2016-08-29 at 09:32 -0400, robert.f...@collabora.com wrote:
From: Robert Foss
From: Grant Grundler
The miii_nway_restart() causes a PHY link change activity and
ax88772_link_reset will be called. link_reset will set
echo "Command failed"
fi
done
iperf3 UDP:
sudo iperf3 -c 192.168.0.28 -u -b 100M -t 0
On 2016-08-29 09:32 AM, robert.f...@collabora.com wrote:
From: Robert Foss
This is a resubmission of v3, since the netdev
mailinlist was not sent the previous submission.
T
From: Robert Foss
From: Vincent Palatin
Check the answers from the USB stack and avoid re-sending multiple times
the request if the device has disappeared.
Signed-off-by: Vincent Palatin
Signed-off-by: Robert Foss
Tested-by: Robert Foss
---
drivers/net/usb/asix_common.c | 56
From: Robert Foss
This is a resubmission of v3, since the netdev
mailinlist was not sent the previous submission.
This series improves power management of the asix driver.
- Suspend/resume support is improved to save needed registers.
- Device disconnection is improved.
- Fixes AX88772x
From: Vincent Palatin
Check the answers from the USB stack and avoid re-sending multiple times
the request if the device has disappeared.
Signed-off-by: Vincent Palatin
Signed-off-by: Robert Foss
Tested-by: Robert Foss
---
drivers/net/usb/asix_common.c | 56
negotiation result. So do this first.
Ignore the ret value since it's ignored in XXX_link_reset() functions.
Signed-off-by: Grant Grundler
Signed-off-by: Robert Foss
Tested-by: Robert Foss
---
drivers/net/usb/asix_devices.c | 5 +
1 file changed, 1 insertion(+), 4 deletions(-)
diff --
From: Robert Foss
From: Grant Grundler
The miii_nway_restart() causes a PHY link change activity and
ax88772_link_reset will be called. link_reset will set
AX_CMD_WRITE_MEDIUM_MODE register correctly.
The asix_write_medium_mode in reset() fills in a default value to the register
which may be
From: Robert Foss
From: Grant Grundler
https://lkml.org/lkml/2014/11/11/947
Ben Hutchings is correct. IEEE 802.3 spec section "22.2.4.1.1 Reset" requires
up to 500ms delay. Mitigate the "max" delay by polling the phy until BCM_RESET
bit is clear.
Signed-off-by: Grant Gru
From: Robert Foss
From: Allan Chou
The change fixes AX88772x resume failure by
- Restore incorrect AX88772A PHY registers when resetting
- Need to stop MAC operation when suspending
- Need to restart MII when restoring PHY
Signed-off-by: Allan Chou
Signed-off-by: Robert Foss
Tested-by
From: Allan Chou
The change fixes AX88772x resume failure by
- Restore incorrect AX88772A PHY registers when resetting
- Need to stop MAC operation when suspending
- Need to restart MII when restoring PHY
Signed-off-by: Allan Chou
Signed-off-by: Robert Foss
Tested-by: Robert Foss
function to ensure the PHY works correctly.
Signed-off-by: Freddy Xin
Signed-off-by: Robert Foss
Tested-by: Robert Foss
---
drivers/net/usb/asix.h | 40 +++--
drivers/net/usb/asix_common.c | 180 +++-
drivers/net/usb/asix_devices.c | 373
From: Grant Grundler
https://lkml.org/lkml/2014/11/11/947
Ben Hutchings is correct. IEEE 802.3 spec section "22.2.4.1.1 Reset" requires
up to 500ms delay. Mitigate the "max" delay by polling the phy until BCM_RESET
bit is clear.
Signed-off-by: Grant Grundler
Signed
From: Robert Foss
From: Freddy Xin
In order to R/W registers in suspend/resume functions, in_pm flags are
added to some functions to determine whether the nopm version of usb
functions is called.
Save BMCR and ANAR PHY registers in suspend function and restore them
in resume function.
Reset
From: Grant Grundler
For the record, I believe I am not the author of these patches.
I believe the original author is
Signed-off-by: Freddy Xin
as recorded in the following code reviews (and testing) that I was
responsible for:
https://chromium-review.googlesource.com/#/q/owner:%22G
From: Grant Grundler
In order to R/W registers in suspend/resume functions, in_pm flags are
added to some functions to determine whether the nopm version of usb
functions is called.
Save BMCR and ANAR PHY registers in suspend function and restore them
in resume function.
Reset HW in resume func
From: Vincent Palatin
Check the answers from the USB stack and avoid re-sending multiple times
the request if the device has disappeared.
Signed-off-by: Vincent Palatin
---
drivers/net/usb/asix_common.c | 56 +-
drivers/net/usb/asix_devices.c | 2 ++
2
From: WK Tsai
The change fixes AX88772x resume failure by
- Restore incorrect AX88772A PHY registers when resetting
- Need to stop MAC operation when suspending
- Need to restart MII when restoring PHY
Signed-off-by: WK Tsai
---
drivers/net/usb/asix_devices.c | 47 +
20 matches
Mail list logo
