From: Poonam Aggrwal <[EMAIL PROTECTED]>
Modified Documentation to explain new properties introduced for UCC TDM
driver. Also two new nodes have been added "brg" and "clocks" to configure
a BRG from device tree.
Signed-off-by: Poonam Aggrwal <[EMAIL PROTECTED]>
Signed-off-by: Ashish Kalra <[EMAIL PROTECTED]>
Signed-off-by: Kim Phillips <[EMAIL PROTECTED]>
Signed-off-by: Michael Barkowski <[EMAIL PROTECTED]>
---
Documentation/powerpc/booting-without-of.txt | 96 +++++++++++++++++++++++++-
1 files changed, 94 insertions(+), 2 deletions(-)
diff --git a/Documentation/powerpc/booting-without-of.txt
b/Documentation/powerpc/booting-without-of.txt
index e9a3cb1..94a6b4b 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1613,8 +1613,8 @@ platforms are moved over to use the flattened-device-tree
model.
Required properties:
- device_type : should be "network", "hldc", "uart", "transparent"
- "bisync" or "atm".
- - compatible : could be "ucc_geth" or "fsl_atm" and so on.
+ "bisync", "atm" or "tdm".
+ - compatible : could be "ucc_geth", "fsl_atm" or "fsl,ucc_tdm" and so on.
- model : should be "UCC".
- device-id : the ucc number(1-8), corresponding to UCCx in UM.
- reg : Offset and length of the register set for the device
@@ -1666,7 +1666,44 @@ platforms are moved over to use the
flattened-device-tree model.
pio-handle = <140001>;
};
+ Required properties for tdm device_type:
+ - instead of tx-clock and rx-clock following clock properties are
+ required:
+ - fsl,tdm-tx-clk : This property selects the TX clock source for TDM
+ from a bank of clocks.
+ - fsl,tdm-rx-clk : This property selects the RX clock source for TDM
+ from a bank of clocks.
+ - fsl,tdm-tx-sync : This property selects the TX Frame sync source
+ for TDM from a bank of clocks.
+ - fsl,tdm-rx-sync : This property selects the TX Frame sync source
+ for TDM from a bank of clocks.
+
+ All the above mentioned properties are string type with possible
+ values
+ "CLK1", "CLK2", "CLK3"..."CLK24" and so on
+ "BRG1", "BRG2", "BRG3"..."BRG16" and so on
+
+ - fsl,tdm-num : TDM to be used (1,2,3 or 4 for TDMA TDMB TDMC TDMD)
+ - fsl,si-num : Serial Interface to be used.
+ Example:
+ [EMAIL PROTECTED] {
+ device_type = "tdm";
+ compatible = "fsl,ucc-tdm";
+ model = "UCC";
+ device-id = <1>;
+ fsl,tdm-num = <1>;
+ fsl,si-num = <1>;
+ fsl,tdm-tx-clk = "CLK1";
+ fsl,tdm-rx-clk = "CLK1";
+ fsl,tdm-tx-sync = "BRG9";
+ fsl,tdm-rx-sync = "BRG9";
+ reg = <2000 200>;
+ interrupts = <20>;
+ interrupt-parent = <&qeic>;
+ pio-handle = <&ucc1pio>;
+ };
+
v) Parallel I/O Ports
This node configures Parallel I/O ports for CPUs with QE support.
@@ -1772,6 +1809,61 @@ platforms are moved over to use the
flattened-device-tree model.
};
};
+ viii) Clocks (clocks)
+ This node specifies the frequency values for all the external clocks
+ viz CLK1 to CLK24 in Hz.
+
+ Required Properties:
+ - compatible : should be "fsl,cpm-clocks".
+ - #clock-cells : It specifies the number of cells occupied by clock-frequency
+ property. Currently #clock-cells = 1 is only supported and implemented.
+ This property is kept for future in case we need frequencies higher than
+ 4 GHz.
+ - clock-frequency : It is a list of u32 values to represent the frequency
+ of each external clock(CLK1 to CLK24) in Hz.Each entry occupies
+ number of cells specified by #clock-cells property(1 for now).
+
+ Example:
+
+ clocks {
+ compatible = "fsl,cpm-clocks";
+ #clock-cells = <1>;
+ /* clock freqs in Hz(for CLK1~CLK24).
+ * CLK11 is 1024KHz,
+ * all other clocks unused
+ */
+ clock-frequency = <0 0 0 0 0 0
+ 0 0 0 0 0 d#1024000 0
+ 0 0 0 0 0 0
+ 0 0 0 0 0 0>;
+ };
+
+ ix) Baud Rate Generator (BRG)
+
+ Required properties:
+ - compatible : shpuld be "fsl,cpm-brg"
+ - fsl,brg-sources : define the input clock for all 16 BRGs. The input
+ clock source could be 1 to 24 for CLK1 to CLK24. Zero means that the
+ particular BRG will be driven by QE clock(BRGCLK).
+ - reg : This property defines the address and size of the memory-mapped
+ registers of the BRG.
+
+ Example:
+
+ [EMAIL PROTECTED] {
+ compatible = "fsl,qe-brg";
+ /* input clock sources for all the 16 BRGs.
+ * 1-24 for CLK1 to CLK24.
+ * BRG9 uses CLK11 others use
+ * the QE clock.
+ */
+ fsl,brg-sources = <0 0 0 0 0 0 0 0
+ b 0 0 0 0 0 0 0>;
+ reg = <640 7f>;
+ };
+
+ In the above entry, for BRG9 the input clock is 0xb(decimal 11) ie
QE_CLK11.
+
j) CFI or JEDEC memory-mapped NOR flash
Flash chips (Memory Technology Devices) are often used for solid state
--
1.5.2.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
