On stmmac driver, PHY specification in device-tree was done using the
non-standard property "snps,phy-addr". Specifying a PHY on a different
MDIO bus that the one within the stmmac controller doesn't seem to be
possible when device-tree is used.
This change adds support for the phy-handle property, as specified in
Documentation/devicetree/bindings/net/ethernet.txt.
Signed-off-by: Mathieu Olivari <math...@codeaurora.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 28 ++++++++++++++--------
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 6 ++++-
include/linux/stmmac.h | 1 +
3 files changed, 24 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index e4f2739..31c6416 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -52,6 +52,7 @@
#include "stmmac_ptp.h"
#include "stmmac.h"
#include <linux/reset.h>
+#include <linux/of_mdio.h>
#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
@@ -816,18 +817,25 @@ static int stmmac_init_phy(struct net_device *dev)
priv->speed = 0;
priv->oldduplex = -1;
- if (priv->plat->phy_bus_name)
- snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
- priv->plat->phy_bus_name, priv->plat->bus_id);
- else
- snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
- priv->plat->bus_id);
+ if (priv->plat->phy_node) {
+ phydev = of_phy_connect(dev, priv->plat->phy_node,
+ &stmmac_adjust_link, 0, interface);
+ } else {
+ if (priv->plat->phy_bus_name)
+ snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
+ priv->plat->phy_bus_name, priv->plat->bus_id);
+ else
+ snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
+ priv->plat->bus_id);
- snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
- priv->plat->phy_addr);
- pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id_fmt);
+ snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+ priv->plat->phy_addr);
+ pr_debug("stmmac_init_phy: trying to attach to %s\n",
+ phy_id_fmt);
- phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, interface);
+ phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link,
+ interface);
+ }
if (IS_ERR(phydev)) {
pr_err("%s: Could not attach to PHY\n", dev->name);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 1664c01..8d23155 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -28,6 +28,7 @@
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/of_device.h>
+#include <linux/of_mdio.h>
#include "stmmac.h"
#include "stmmac_platform.h"
@@ -144,13 +145,16 @@ static int stmmac_probe_config_dt(struct platform_device
*pdev,
/* Default to phy auto-detection */
plat->phy_addr = -1;
+ /* If we find a phy-handle property, use it as the PHY */
+ plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
+
/* "snps,phy-addr" is not a standard property. Mark it as deprecated
* and warn of its use. Remove this when phy node support is added.
*/
if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
- if (plat->phy_bus_name)
+ if (plat->phy_node || plat->phy_bus_name)
plat->mdio_bus_data = NULL;
else
plat->mdio_bus_data =
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 7f484a2..c735f5c 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -99,6 +99,7 @@ struct plat_stmmacenet_data {
int phy_addr;
int interface;
struct stmmac_mdio_bus_data *mdio_bus_data;
+ struct device_node *phy_node;
struct stmmac_dma_cfg *dma_cfg;
int clk_csr;
int has_gmac;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
