From: Scott Feldman <sfel...@gmail.com> This patchset was previously submitted as RFC. No changes from the last version (v2) sent under RFC. Including RFC version history here for reference.
RFC v2: - s/fwd_mark/offload_fwd_mark - use consume_skb rather than kfree_skb when dropping pkt on egress. - Use Jiri's suggestion to use ifindex of one of the ports in a group as the mark for all the ports in the group. This can be done with no additional storage (no hashtable from v1). To pull it off, we need some simple recursive routines to walk the netdev tree ensuring all leaves in the tree (ports) in the same group (e.g. bridge) belonging to the same switch device will have the same offload fwd mark. Maybe someone sees a better design for the recusive routines? They're not too bad, and should cover the stacked driver cases. RFC v1: With switchdev support for offloading L2/L3 forwarding data path to a switch device, we have a general problem where both the device and the kernel may forward the packet, resulting in duplicate packets on the wire. Anytime a packet is forwarded by the device and a copy is sent to the CPU, there is potential for duplicate forwarding, as the kernel may also do a forwarding lookup and send the packet on the wire. The specific problem this patch series is interested in solving is avoiding duplicate packets on bridged ports. There was a previous RFC from Roopa (http://marc.info/?l=linux-netdev&m=142687073314252&w=2) to address this problem, but didn't solve the problem of mixed ports in the bridge from different devices; there was no way to exclude some ports from forwarding and include others. This RFC solves that problem by tagging the ingressing packet with a unique mark, and then comparing the packet mark with the egress port mark, and skip forwarding when there is a match. For the mixed ports bridge case, only those ports with matching marks are skipped. The switchdev port driver must do two things: 1) Generate a fwd_mark for each switch port, using some unique key of the switch device (and optionally port). This is done when the port netdev is registered or if the port's group membership changes (joins/leaves a bridge, for example). 2) On packet ingress from port, mark the skb with the ingress port's fwd_mark. If the device supports it, it's useful to only mark skbs which were already forwarded by the device. If the device does not support such indication, all skbs can be marked, even if they're local dst. Two new 32-bit fields are added to struct sk_buff and struct netdevice to hold the fwd_mark. I've wrapped these with CONFIG_NET_SWITCHDEV for now. I tried using skb->mark for this purpose, but ebtables can overwrite the skb->mark before the bridge gets it, so that will not work. In general, this fwd_mark can be used for any case where a packet is forwarded by the device and a copy is sent to the CPU, to avoid the kernel re-forwarding the packet. sFlow is another use-case that comes to mind, but I haven't explored the details. Scott Feldman (5): net: don't reforward packets already forwarded by offload device net: add phys ID compare helper to test if two IDs are the same switchdev: add offload_fwd_mark generator helper rocker: add offload_fwd_mark support switchdev: update documentation for offload_fwd_mark Documentation/networking/switchdev.txt | 14 +++- drivers/net/ethernet/rocker/rocker.c | 14 +++- drivers/net/ethernet/rocker/rocker.h | 1 + include/linux/netdevice.h | 13 ++++ include/linux/skbuff.h | 4 ++ include/net/switchdev.h | 9 +++ net/core/dev.c | 10 +++ net/switchdev/switchdev.c | 111 ++++++++++++++++++++++++++++++-- 8 files changed, 167 insertions(+), 9 deletions(-) -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
