e100: FIX: fix netconsole fast reboot attached to e100

When rebooting with netconsole over e100, the driver shutdown code
would deadlock with netpoll. Reduce shutdown code to a bare minimum
while retaining WoL and suspend functionality.

Signed-off-by: Auke Kok <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---

 drivers/net/e100.c |   50 ++++++++++++++++++++++++++-----------------
 1 file changed, 31 insertions(+), 19 deletions(-)

diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 27d5d2f..a3a08a5 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2039,7 +2039,6 @@ static int e100_change_mtu(struct net_de
        return 0;
 }

-#ifdef CONFIG_PM
 static int e100_asf(struct nic *nic)
 {
        /* ASF can be enabled from eeprom */
@@ -2048,7 +2047,6 @@ static int e100_asf(struct nic *nic)
           !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
           ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE));
 }
-#endif

 static int e100_up(struct nic *nic)
 {
@@ -2715,34 +2713,32 @@ static void __devexit e100_remove(struct
        }
 }

+#ifdef CONFIG_PM
 static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
 {
        struct net_device *netdev = pci_get_drvdata(pdev);
        struct nic *nic = netdev_priv(netdev);

-       if (netif_running(netdev))
-               e100_down(nic);
-       e100_hw_reset(nic);
-       netif_device_detach(netdev);
+       netif_poll_disable(nic->netdev);
+       del_timer_sync(&nic->watchdog);
+       netif_carrier_off(nic->netdev);

-#ifdef CONFIG_PM
        pci_save_state(pdev);
-       if (nic->flags & (wol_magic | e100_asf(nic)))
-#else
-       if (nic->flags & (wol_magic))
-#endif
-               pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
-       else
-               /* disable PME */
-               pci_enable_wake(pdev, 0, 0);
+
+       if ((nic->flags & wol_magic) | e100_asf(nic)) {
+               pci_enable_wake(pdev, PCI_D3hot, 1);
+               pci_enable_wake(pdev, PCI_D3cold, 1);
+       } else {
+               pci_enable_wake(pdev, PCI_D3hot, 0);
+               pci_enable_wake(pdev, PCI_D3cold, 0);
+       }

        pci_disable_device(pdev);
-       pci_set_power_state(pdev, pci_choose_state(pdev, state));
+       pci_set_power_state(pdev, PCI_D3hot);

        return 0;
 }

-#ifdef CONFIG_PM
 static int e100_resume(struct pci_dev *pdev)
 {
        struct net_device *netdev = pci_get_drvdata(pdev);
@@ -2764,7 +2760,23 @@ #endif /* CONFIG_PM */

 static void e100_shutdown(struct pci_dev *pdev)
 {
-       e100_suspend(pdev, PMSG_SUSPEND);
+       struct net_device *netdev = pci_get_drvdata(pdev);
+       struct nic *nic = netdev_priv(netdev);
+
+       netif_poll_disable(nic->netdev);
+       del_timer_sync(&nic->watchdog);
+       netif_carrier_off(nic->netdev);
+
+       if ((nic->flags & wol_magic) | e100_asf(nic)) {
+               pci_enable_wake(pdev, PCI_D3hot, 1);
+               pci_enable_wake(pdev, PCI_D3cold, 1);
+       } else {
+               pci_enable_wake(pdev, PCI_D3hot, 0);
+               pci_enable_wake(pdev, PCI_D3cold, 0);
+       }
+
+       pci_disable_device(pdev);
+       pci_set_power_state(pdev, PCI_D3hot);
 }

 /* ------------------ PCI Error Recovery infrastructure  -------------- */
@@ -2848,9 +2860,9 @@ static struct pci_driver e100_driver = {
        .id_table =     e100_id_table,
        .probe =        e100_probe,
        .remove =       __devexit_p(e100_remove),
+#ifdef CONFIG_PM
        /* Power Management hooks */
        .suspend =      e100_suspend,
-#ifdef CONFIG_PM
        .resume =       e100_resume,
 #endif
        .shutdown =     e100_shutdown,
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to