Hi Florian,
> Well, the way the code is structure is that if you call that function
> with a test mode value that is not part of the standard set, it returns
> -EOPNOTSUPP, so if your particular PHY driver wants to "overlay"
> standard and non-standard modes, it can by using that hint.
>
> This s
On 05/01/2018 01:07 PM, woojung@microchip.com wrote:
> Hi Florian,
>
>> Not sure I completely understand your suggestion, do you mean that I
>> should break down the body of that function above such that there are
>> per-speed lower level functions? Something like the pseudo-code below:
>>
>>
Hi Florian,
> Not sure I completely understand your suggestion, do you mean that I
> should break down the body of that function above such that there are
> per-speed lower level functions? Something like the pseudo-code below:
>
> genphy_set_test() {
> switch (mode) {
> case PHY_STD_
On 05/01/2018 10:29 AM, woojung@microchip.com wrote:
> Hi Florian,
>
>> diff --git a/drivers/net/phy/phy-tests.c b/drivers/net/phy/phy-tests.c
> ...
>> +/* genphy_set_test - Make a PHY enter one of the standard IEEE defined
>> + * test modes
>> + * @phydev: the PHY device instance
>> + * @test
Hi Florian,
> diff --git a/drivers/net/phy/phy-tests.c b/drivers/net/phy/phy-tests.c
...
> +/* genphy_set_test - Make a PHY enter one of the standard IEEE defined
> + * test modes
> + * @phydev: the PHY device instance
> + * @test: the desired test mode
> + * @data: test specific data (none)
> + *
On 04/30/2018 04:20 PM, Andrew Lunn wrote:
>> +/* genphy_set_test - Make a PHY enter one of the standard IEEE defined
>> + * test modes
>> + * @phydev: the PHY device instance
>> + * @test: the desired test mode
>> + * @data: test specific data (none)
>> + *
>> + * This function makes the designate
> +/* genphy_set_test - Make a PHY enter one of the standard IEEE defined
> + * test modes
> + * @phydev: the PHY device instance
> + * @test: the desired test mode
> + * @data: test specific data (none)
> + *
> + * This function makes the designated @phydev enter the desired standard
> + * 100Base
Add support for the 100BaseT2 and 1000BaseT standard test modes as
defined by the IEEE 802.3-2012-Section two and three. We provide a set
of helper functions for PHY drivers to either punt entirely onto
genphy_* functions or if they desire, build additional tests on top of
the standard ones availab
