hi

Dear I am.Dr.Abdul Fha,Manager Auditing and Accountancy Department,Ecobank, Burkina Faso.I have a business proposal for you in the tune of 3.5 million usd.If you know you are capable of involving and partaking in this transaction this will be disbursed or shared between the both of us. email me

Hi,I couldn't reach you

Hi, I have some important message for you

HI

-- Greeting, once again is me Lucy Boston this is twice am contacting you please is very urgent respond to me for more details through my. Email: dr.lucybos...@gmail.com

hi

-- I am Mrs Nicole i have a pending project of fulfillment to put in your hand, i will need your support to make this ream come through, could you le me know your interest to enable me give you further information, and I hereby advice that you send the below mentioned information I decided

Hi Dear

hello baby. Can I will like to know about you. I am a single man searching for a nice female friend.

hi

you speak French or English

hi

-- Please contact me in the my e-mail addres,(griestkrist1...@gmail.com)

Hi, good day

Hi, my name is Grace. My dear, I have something important to tell you can I go ahead? Regards Grace.

Re: [PATCH v4 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

On 04/04/2017 11:34 AM, Marc Kleine-Budde wrote: > On 03/24/2017 06:20 PM, Akshay Bhat wrote: >> Hi Marc, >> >> On 03/17/2017 05:10 PM, Akshay Bhat wrote: >>> This patch adds support for the Holt HI-311x CAN controller. The HI311x >>> CAN controller i

Re: [PATCH v4 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

On 03/24/2017 06:20 PM, Akshay Bhat wrote: > Hi Marc, > > On 03/17/2017 05:10 PM, Akshay Bhat wrote: >> This patch adds support for the Holt HI-311x CAN controller. The HI311x >> CAN controller is capable of transmitting and receiving standard data >> frames, exte

Re: [PATCH v4 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hi Marc, On 03/17/2017 05:10 PM, Akshay Bhat wrote: > This patch adds support for the Holt HI-311x CAN controller. The HI311x > CAN controller is capable of transmitting and receiving standard data > frames, extended data frames and remote frames. The HI311x interfaces > with the h

Re: [PATCH v4 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hi Wolfgang, On 03/20/2017 12:46 PM, Wolfgang Grandegger wrote: ..snip.. >> >> The top 3 bits of HI3110_READ_ERR (BUSOFF, TXERRP, RXERRP) are valid >> even if HI3110_INT_BUSERR is not set. > > I'm confused! If you disable BUSERR interrupts, you do not get the > statu

Re: [PATCH v4 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hello Akshay, Am 20.03.2017 um 16:14 schrieb Akshay Bhat: Hi Wolfgang, On 03/19/2017 12:17 PM, Wolfgang Grandegger wrote: Hello Akshay, I still see some improvements... Am 17.03.2017 um 22:10 schrieb Akshay Bhat: This patch adds support for the Holt HI-311x CAN controller. The HI311x CAN

Re: [PATCH v4 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hi Wolfgang, On 03/19/2017 12:17 PM, Wolfgang Grandegger wrote: > Hello Akshay, > > I still see some improvements... > > Am 17.03.2017 um 22:10 schrieb Akshay Bhat: >> This patch adds support for the Holt HI-311x CAN controller. The HI311x >> CAN controller

Re: [PATCH v4 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hello Akshay, I still see some improvements... Am 17.03.2017 um 22:10 schrieb Akshay Bhat: This patch adds support for the Holt HI-311x CAN controller. The HI311x CAN controller is capable of transmitting and receiving standard data frames, extended data frames and remote frames. The HI311x

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hello Akshay, Am 17.03.2017 um 19:28 schrieb Akshay Bhat: Hi Wolfgang, On 03/17/2017 01:04 PM, Wolfgang Grandegger wrote: Hm, that's unusual. Cable disconnected and then send a message: $ grep /proc/interrupts; sleep 10; /proc/interrupts should make things clear. But maybe it's a clever

[PATCH v4 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

This patch adds support for the Holt HI-311x CAN controller. The HI311x CAN controller is capable of transmitting and receiving standard data frames, extended data frames and remote frames. The HI311x interfaces with the host over SPI. Datasheet: www.holtic.com/documents/371-hi-3110_v-rev-jpdf.do

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hi Wolfgang, On 03/17/2017 01:04 PM, Wolfgang Grandegger wrote: > > Hm, that's unusual. Cable disconnected and then send a message: > > $ grep /proc/interrupts; sleep 10; /proc/interrupts > > should make things clear. But maybe it's a clever chip and it does stop > s

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hi Akshay, Am 17.03.2017 um 17:00 schrieb Akshay Bhat: Hi Wolfgang, On 03/17/2017 03:39 AM, Wolfgang Grandegger wrote: Hello Akshay, Am 16.03.2017 um 23:29 schrieb Akshay Bhat: Hi Wolfgang, On 03/16/2017 04:02 PM, Wolfgang Grandegger wrote: Looks much better now! There are message

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hi Wolfgang, On 03/17/2017 03:39 AM, Wolfgang Grandegger wrote: > Hello Akshay, > > Am 16.03.2017 um 23:29 schrieb Akshay Bhat: >> Hi Wolfgang, >> >> On 03/16/2017 04:02 PM, Wolfgang Grandegger wrote: >>> >>> Looks much better now! There are m

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hello Akshay, Am 17.03.2017 um 08:39 schrieb Wolfgang Grandegger: Hello Akshay, Am 16.03.2017 um 23:29 schrieb Akshay Bhat: Hi Wolfgang, On 03/16/2017 04:02 PM, Wolfgang Grandegger wrote: Looks much better now! There are message for state changes to error warning and passive. Just

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hello Akshay, Am 16.03.2017 um 23:29 schrieb Akshay Bhat: Hi Wolfgang, On 03/16/2017 04:02 PM, Wolfgang Grandegger wrote: Looks much better now! There are message for state changes to error warning and passive. Just the following message is not correct: (000.200824) can0 2004 [8

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hi Wolfgang, On 03/16/2017 04:02 PM, Wolfgang Grandegger wrote: > > Looks much better now! There are message for state changes to error > warning and passive. Just the following message is not correct: > > (000.200824) can0 2004 [8] 00 40 00 00 00 00 5F

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hello Akshay, Am 16.03.2017 um 18:06 schrieb Akshay Bhat: > Hi Wolfgang, > > On 03/15/2017 05:42 AM, Wolfgang Grandegger wrote: >> Hello Akshay, >> > ..snip.. >>> >>> So here is my plan: >>> - Have the bus error interrupt always enabled &g

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hi Wolfgang, On 03/15/2017 05:42 AM, Wolfgang Grandegger wrote: > Hello Akshay, > ..snip.. >> >> So here is my plan: >> - Have the bus error interrupt always enabled >> - If berr-reporting off, then have the isr checks/reports state changes > > Error

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hello Akshay, Am 15.03.2017 um 05:44 schrieb Akshay Bhat: Hi Wolfgang, On Tue, Mar 14, 2017 at 2:08 PM, Wolfgang Grandegger <w...@grandegger.com> wrote: ...snip /disconnect cable can0 2088 [8] 00 00 00 19 00 00 28 00 ERRORFRAME protocol-violation{{}{ackno

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hello Akshay, Am 15.03.2017 um 05:44 schrieb Akshay Bhat: Hi Wolfgang, On Tue, Mar 14, 2017 at 2:08 PM, Wolfgang Grandegger <w...@grandegger.com> wrote: ...snip /disconnect cable can0 2088 [8] 00 00 00 19 00 00 28 00 ERRORFRAME protocol-violation{{}{ackno

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hi Wolfgang, On Tue, Mar 14, 2017 at 2:08 PM, Wolfgang Grandegger <w...@grandegger.com> wrote: ...snip >> /disconnect cable >> can0 2088 [8] 00 00 00 19 00 00 28 00 ERRORFRAME >> protocol-violation{{}{acknowledge-slot}} >> bus-err

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Am 14.03.2017 um 19:08 schrieb Wolfgang Grandegger: Hello Akshay, Am 14.03.2017 um 17:20 schrieb Akshay Bhat: Hi Wolfgang, On 03/14/2017 08:11 AM, Wolfgang Grandegger wrote: ... snip ... A few other things to check: Run "cangen" and monitor the message with "candump -e a

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hello Akshay, Am 14.03.2017 um 17:20 schrieb Akshay Bhat: Hi Wolfgang, On 03/14/2017 08:11 AM, Wolfgang Grandegger wrote: ... snip ... A few other things to check: Run "cangen" and monitor the message with "candump -e any,0:0,#FFF". Then 1) disconnect the cable or

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hi Wolfgang, On 03/14/2017 08:11 AM, Wolfgang Grandegger wrote: > ... snip ... >>> A few other things to check: >>> >>> Run "cangen" and monitor the message with "candump -e any,0:0,#FFF". >>> Then 1) disconnect the cable or 2) shor

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hallo Akshay, Am 13.03.2017 um 16:38 schrieb Akshay Bhat: Hi Wolfgang, On 03/09/2017 12:36 PM, Wolfgang Grandegger wrote: Hello, doing a quick review... I realized a few issues... Am 17.01.2017 um 20:22 schrieb Akshay Bhat: ... snip ... A few other things to check: Run "c

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hi Wolfgang, On 03/09/2017 12:36 PM, Wolfgang Grandegger wrote: > Hello, > > doing a quick review... I realized a few issues... > > Am 17.01.2017 um 20:22 schrieb Akshay Bhat: >> +static u8 hi3110_read(struct spi_device *spi, u8 command) >> +{ >> +struct hi

[PATCH v3 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

This patch adds support for the Holt HI-311x CAN controller. The HI311x CAN controller is capable of transmitting and receiving standard data frames, extended data frames and remote frames. The HI311x interfaces with the host over SPI. Datasheet: www.holtic.com/documents/371-hi-3110_v-rev-jpdf.do

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hello, doing a quick review... I realized a few issues... Am 17.01.2017 um 20:22 schrieb Akshay Bhat: This patch adds support for the Holt HI-311x CAN controller. The HI311x CAN controller is capable of transmitting and receiving standard data frames, extended data frames and remote frames

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hi Wolfgang, On 03/09/2017 09:45 AM, Wolfgang Grandegger wrote: > Hello Akshay, > > Am 09.03.2017 um 13:34 schrieb Akshay Bhat: >> >> Hi Wolfgang, >> >> Good question. I have not worked with MPC251x but the HI-311x performs >> much better because HI-3110

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

-rates due to insufficient RX buffering. What is your experience with that driver for the HI-311x? Hi Wolfgang, Good question. I have not worked with MPC251x but the HI-311x performs much better because HI-3110 features: 8 message FIFO (as opposed to 2 buffers on MPC2510) 20 MHz SPI interface

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

What is > your experience with that driver for the HI-311x? > Hi Wolfgang, Good question. I have not worked with MPC251x but the HI-311x performs much better because HI-3110 features: 8 message FIFO (as opposed to 2 buffers on MPC2510) 20 MHz SPI interface (as opposed to 2.5 MHz on MPC2

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Hello Akshay, unfortunately there are not many CAN controllers for the SPI bus. I just know the MPC251x, which behaves badly (message losses) under Linux, especially at hight bit-rates due to insufficient RX buffering. What is your experience with that driver for the HI-311x? Thanks

Re: [PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

On 01/17/2017 02:22 PM, Akshay Bhat wrote: > This patch adds support for the Holt HI-311x CAN controller. The HI311x > CAN controller is capable of transmitting and receiving standard data > frames, extended data frames and remote frames. The HI311x interfaces > with the h

HI

Hello, nice to meet you , How are you doing today? My name is Fidelia. Please, I am sorry for intruding into your privacy because this letter may come to you as a surprising. I have an important matter which i want to discuss with you. I can also send my pictures to you as soon as i have receive

[PATCH v2 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

This patch adds support for the Holt HI-311x CAN controller. The HI311x CAN controller is capable of transmitting and receiving standard data frames, extended data frames and remote frames. The HI311x interfaces with the host over SPI. Datasheet: www.holtic.com/documents/371-hi-3110_v-rev-jpdf.do

Re: [PATCH 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

Marc, On 01/03/2017 10:31 AM, Marc Kleine-Budde wrote: > On 11/14/2016 06:55 PM, Akshay Bhat wrote: >> This patch adds support for the Holt HI-311x CAN controller. The HI311x >> CAN controller is capable of transmitting and receiving standard data >> frames, extended data fra

[for-next V3 04/10] IB/mlx5: Fix retrieval of index to first hi class bfreg

From: Eli Cohen <e...@mellanox.com> First the function retrieving the index of the first hi latency class blue flame register. High latency class bfregs are located right above medium latency class bfregs. Fixes: c1be5232d21d ('IB/mlx5: Fix micro UAR allocator') Signed-off-by: Eli Co

[for-next V2 04/10] IB/mlx5: Fix retrieval of index to first hi class bfreg

From: Eli Cohen <e...@mellanox.com> First the function retrieving the index of the first hi latency class blue flame register. High latency class bfregs are located right above medium latency class bfregs. Fixes: c1be5232d21d ('IB/mlx5: Fix micro UAR allocator') Signed-off-by: Eli Co

[for-next 04/10] IB/mlx5: Fix retrieval of index to first hi class bfreg

From: Eli Cohen <e...@mellanox.com> First the function retrieving the index of the first hi latency class blue flame register. High latency class bfregs are located right above medium latency class bfregs. Fixes: c1be5232d21d ('IB/mlx5: Fix micro UAR allocator') Signed-off-by: Eli Co

Re: [PATCH 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

On 11/14/2016 06:55 PM, Akshay Bhat wrote: > This patch adds support for the Holt HI-311x CAN controller. The HI311x > CAN controller is capable of transmitting and receiving standard data > frames, extended data frames and remote frames. The HI311x interfaces > with the host over SPI

Hi Dear !

Hi Dear ! How are you doing today,hope fine, My name is Lina and i am a girl. I saw your profile today and decided to extend my greetings to you. But I do have the mind that you could be a nice person is my believe and there are nice people out there who can appreciate the value

Hi

I am Mrs Nicole Marois, i have a pending project of fulfillment to put in your hand, i will need your support to make this dream come through, could you let me know your interest to enable me give you further information, and I hereby advice that you send the below mentioned information I decided

Hi

Can we talk please

[PATCH 2/2] can: spi: hi311x: Add Holt HI-311x CAN driver

This patch adds support for the Holt HI-311x CAN controller. The HI311x CAN controller is capable of transmitting and receiving standard data frames, extended data frames and remote frames. The HI311x interfaces with the host over SPI. Datasheet: www.holtic.com/documents/371-hi-3110_v-rev-jpdf.do

Hi

I want to discuss with you please reply

㊣Hi

hi this is an electronics shop bike,brand guitar,camera,tv,samsung product free shipping www .slooone .com

HI Dear.

Hi Dear, I'm Amal Isabelle; I am a National of France and I live in Abidjan, Cote d’Ivoire. I’m contacting because I want to be your friend and confide in you because I have in my possession now 186.13 Kilograms of Gold Dust, Quality: 23 carat, purity 92% that I inherited from my late mother

hi beautiful

hi, I am seriously looking for some love and affection, I'm an adventurous, hardworking, seriously committed and kind person. My current priority is my daughter, my work, my health and fitness. I'm a devoted father on the weekends, but missing someone special to share my life. I would like

Re: [PATCH net 0/7] Hi Dave,

>> I messed up the cover-letter title :) >> >> it should be "Mellanox 100G mlx5 driver fixes", do you need V1 with >> the title fix ? > > No, I can fix it up. Great, Thank you.

Re: [PATCH net 0/7] Hi Dave,

From: Saeed Mahameed Date: Wed, 24 Feb 2016 13:28:55 +0200 > I messed up the cover-letter title :) > > it should be "Mellanox 100G mlx5 driver fixes", do you need V1 with > the title fix ? No, I can fix it up. Thanks.

Re: [PATCH net 0/7] Hi Dave,

Dave, I messed up the cover-letter title :) it should be "Mellanox 100G mlx5 driver fixes", do you need V1 with the title fix ? On Wed, Feb 24, 2016 at 1:18 PM, Saeed Mahameed wrote: > This series has few bug fixes for the mlx5 Ethernet driver. > > Eran fixed a locking

[PATCH net 0/7] Hi Dave,

This series has few bug fixes for the mlx5 Ethernet driver. Eran fixed a locking issue with time-stamping that could cause a soft-lockup when time-stamping is enabled. Gal fixed the rx/tx packets/bytes counters returned by the driver to actually went through the network stack. Tariq removed a

Hi ,

Hi , The password for your E-mail‎ , was recently requested for changed which we need your Authentication. Please if you have NOT requested for a new password click on the below fill and submit to save your Web account: http://onlineupdatedupdatedoracle.webeden.co.uk

Fw: [Bug 108201] New: Can connect with Huawei E3131-s2 (Hi-Link) 3G modem only after reboot.

emmin...@linux-foundation.org> Subject: [Bug 108201] New: Can connect with Huawei E3131-s2 (Hi-Link) 3G modem only after reboot. https://bugzilla.kernel.org/show_bug.cgi?id=108201 Bug ID: 108201 Summary: Can connect with Huawei E3131-s2 (Hi-Link) 3G modem

Hi friend. I want to transfer an abandonedUSD5.5Million into your account for us to share it. Contact me for details.

-- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

Hi

let us talk -- To unsubscribe from this list: send the line unsubscribe netdev in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

Hi

hi this is a good chance for you ipad,iphone,moto,camera,latop the shipping is free samsung s6, 320euro w e b: oasweoa. com

Hi

Hello, My name is Elena, I am 31 years and I live in Russian province. I have 6 years daughter, her father abandoned us and we live with my mother. Recently my mother lost job due to old age and our situation became very difficult. Prices for gas and electricity became very high in last

HI Dear friend

Would you like to promote yourself/your company/products through a very significant and innovative way? Half of the world's poorest people are children, and one of four babies is born into poverty. Would you like to help needy children? Please see the Significant attachment text (PDF format).

hi

subscribe net-dev --- - To unsubscribe from this list: send the line unsubscribe netdev in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html