答复: [MM] Huawei E1820 and NDISDUP

Dear Graham: Can you tell me the firmware version of your E3276? Thank you. Best Regards, Franko Fang -邮件原件- 发件人: Graham Inggs [mailto:graham.in...@uct.ac.za] 发送时间: 2013年6月5日 5:39 收件人: Fangxiaozhi (Franko); networkmanager-list@gnome.org 主题: RE: [MM] Huawei E1820 and NDIS

RE: [MM] Huawei E1820 and NDISDUP

> I am sorry, E1820 and E3276 cannot support the NDISDUP feature through the > PCUI port (AT port). OK, so the E1820 has a PPP interface we can use instead, but what other method is there of connecting the E3276? The E3276 has no PPP interface and I have been using NDISDUP through the PCUI por

RE: [MM] Huawei E1820 and NDISDUP

So many questions! :) I'm going to try and answer them in one post. > Quick question, in Windows does the device have the 00/1/2/3/4/5 hardware > address? No, in Windows the MAC address was 00:1E:10:1F:E9:48 > Can we get lsusb -v output for the device too though? I attach three lsusb -v outpu

Require wpa_supplicant (>= 1.1)

I recently reported an issue with NetworkManager that causes buggy and unreliable network service to some PEAP networks if the wpa_supplicant is not up to date (1.1 or higher). Because of this I think we should check for the right version of wpa_tools at configure time to prevent this issue. Worst

答复: [MM] Huawei E1820 and NDISDUP

Dear Graham: I am sorry, E1820 and E3276 cannot support the NDISDUP feature through the PCUI port (AT port). In fact, the Huawei data card device can not support the NDISDUP feature through the PCUI port, unless it can expose the standard ECM port(bInterfaceClass==0x02, bInterfaceSu