On Tue, 1 Dec 2015 10:12:11 +0100
poma wrote:
>
> 你好
>
> network-manager-applet-1.2.0-0.9.20151119gitbc8a795.fc24.x86_64
>
> coredumpctl gdb:
>
>PID: 1676 (nm-applet)
> Signal: 11 (SEGV)
> Command Line: nm-applet
> Executable:
On Thu, 19 Nov 2015 15:30:46 +0100
Lubomir Rintel wrote:
> Hi Joel,
>
> thanks for the patch but I don't think it makes sense to apply it.
>
> I think distributing NetworkManager linked with OpenSSL would be a
> violation of NetworkManager's license (since the OpenSSL license
On Mon, 23 Nov 2015 22:42:09 +0100
Thomas Schäfer wrote:
> Hi,
>
> There is a device stranded in front of my computer: MC7304.
> It works basically under linux. But I have a problem. The dualstack
> mode of the provided by Deutsche Telekom makes problems. Addresses
> are
On Sat, 7 Nov 2015 13:55:39 -0200
"Ethy H. Brito" wrote:
>
> Hi All
>
> I am not certain if here is the right place to ask this. Forgive me
> if it is not.
>
> Why, if I have a password protected private key, the OpenVPN plug-in
> demands me to enter the password to
On Mon, 28 Sep 2015 09:05:02 +0200
Olaf Hering wrote:
> I'm running openSUSE Tumbleweed, with GNOME 3.16.2 and NM 1.0.6, and
> have odd issues with networking.
>
> Initially GNOME automatically configured the onboard ethernet and
> named it "Wired Connection 1". I added a few
On Mon, 28 Sep 2015 19:18:12 +0200
Olaf Hering wrote:
> Am 28.09.2015 um 09:05 schrieb Olaf Hering:
> > connection.autoconnect-slaves: -1 (default)
>
> Did I miss that knob in the GUI? Setting it to 1 with
> "nmcli connection edit bridge" seems to fix the "up" command.
On Mon, 14 Sep 2015 10:36:59 +0200
Jan Grulich wrote:
> Hi,
>
> I'm trying to improve our WPA/WPA2 Enterprise support in KDE and I
> have few questions regarding 802-11x security setting.
>
> 1) When phase2-foo properties should be used instead of just foo
> properties
On Mon, 14 Sep 2015 13:23:14 +0200
Jan Grulich <jgrul...@redhat.com> wrote:
> On Monday 14 of September 2015 12:51:01 Jirka Klimes wrote:
> > On Mon, 14 Sep 2015 10:36:59 +0200
> >
> > Jan Grulich <jgrul...@redhat.com> wrote:
> > > Hi,
> > >
On Saturday 12 of October 2013 22:40:25 Mehmet Giritli wrote:
Hi,
I use gentoo and this problem as reported by me to the gentoo bugzilla.
But devs over there could not really figure out what the problem is,
hence this email.
Recently I upgraded from 0.9.8.4 to 0.9.8.6 and as a result I
On Wednesday 25 of September 2013 17:18:35 Jiri Pirko wrote:
Wed, Sep 25, 2013 at 04:46:48PM CEST, d...@gnome.org wrote:
On 09/16/2013 03:28 AM, Jiri Pirko wrote:
Hi, any comments please? I discussed this with jklimes and he seems
happy with it.
Sorry for the delay. Mostly good, and I see
On Tuesday 24 of September 2013 12:58:01 Jiri Popelka wrote:
---
examples/python/goi-device-state-ip4config.py | 4 ++--
examples/python/goi-list-connections.py | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
Patch applied:
a20fd994f442e6c30a4e3af3ab9bb8deb3955f89 (master)
On Wednesday 04 of September 2013 14:29:31 Dan Williams wrote:
On Wed, 2013-09-04 at 18:18 +0200, Jirka Klimes wrote:
On Tuesday 03 of September 2013 13:36:49 Dan Williams wrote:
This part of the logs shows the problem:
I didn't debug much further, but what's interesting is also
GLib
On Thursday 22 of August 2013 16:20:32 Jiri Pirko wrote:
Thu, Aug 22, 2013 at 03:47:24PM CEST, d...@gnome.org wrote:
I committed the non-nmcli parts (with three small fixes: added spaces
before ( in function calls [eg, teamdctl_alloc ()], fixed a build
error when building without libteamdctl
On Tuesday 03 of September 2013 16:57:05 Jiri Pirko wrote:
Signed-off-by: Jiri Pirko j...@resnulli.us
---
src/Makefile.am | 2 +
src/applet-device-team.c | 165
src/applet-device-team.h | 27 +++
On Tuesday 03 of September 2013 13:36:49 Dan Williams wrote:
This part of the logs shows the problem:
I didn't debug much further, but what's interesting is also
GLib-CRITICAL **: g_hash_table_iter_next: assertion `ri-version ==
ri-hash_table-version'
failed
It comes from remove_agent():
On Tuesday 21 of May 2013 11:07:02 Colin Walters wrote:
On Tue, 2013-05-21 at 09:08 +0200, Jirka Klimes wrote:
CC libgsystem_la-gsystem-file-utils.lo
libgsystem/gsystem-file-utils.c: In function 'linkcopy_internal_attempt':
libgsystem/gsystem-file-utils.c:358:3: error: implicit
On Friday 17 of May 2013 14:10:56 Colin Walters wrote:
On Fri, 2013-05-17 at 08:04 -0400, Pavel Simerda wrote:
Colin, do you have any ideas for the NetworkManager codebase apart from
the cleanup functions?
Possibly; the structured logging for example. NM could tag e.g. DHCP
log messages
On Thursday 16 of May 2013 14:09:32 Dan Williams wrote:
On Thu, 2013-05-16 at 04:53 -0400, Pavel Simerda wrote:
From: Colin Walters walt...@verbum.org
On Mon, 2013-05-06 at 12:50 -0500, Dan Williams wrote:
On Fri, 2013-04-26 at 16:42 -0400, Colin Walters wrote:
And change
Looking at the routing table should be enough (ip route), NM's D-Bus
interface and other tools could be useful too.
jklimes: This might be a suggestion for nmcli, the user needs to know which
connections/devices are connected and which one is the default route one.
Yeah, nmcli indicates
On Saturday 01 of December 2012 21:48:39 Aston wrote:
Hi all,
My laptop unable to connect to a particular wireless network(essid:
ChinaNet-Starbucks , it is a open wiwiz hotspot http://www.wiwiz.com) by
using NetworkManager,
Could you attach /var/log/messsages (or other file where
Hello,
There are some patches in cli-enhance' branch ready to cherry-pick to master:
1) libnm-glib nm_device_wifi_request_scan_simple()
http://cgit.freedesktop.org/NetworkManager/NetworkManager/commit/?h=cli-
enhanceid=8eba31f02dab7ff0dae89853ede719ea93f7ea05
2) 5 patches for logging
* core:
On Monday 29 of October 2012 18:42:27 Sanjay Pallikera wrote:
Hello,
One of the error I get while building the systemd (along with NM) is :
../src/src/unit.c:1432 : error: `TFD_NONBLOCK' undeclared (first use in this
function).
Note: This error originates from the src in systemd module.
I
On Saturday 11 of August 2012 20:20:49 Robin Becker wrote:
I've asked this question on a couple of Arch lists, but have no useful
answer.
I have two Arch linux systems running identical software. On one
system nm-applet shows tool tips; on the other it does not.
Since the nowshow machine is
On Saturday 14 of July 2012 00:16:18 Shelbias Cooper wrote:
Hi,
Is it possible to Auto-connect to a OpenVPN-Server?
tobias
Not yet, but the feature is on todo list.
In the meantime you could use a dispatcher script that will connect you to VPN
when a base (wired, wireless,...) connection
On Thursday 05 of July 2012 09:48:19 Miguel Guedes wrote:
Hi All,
I'm trying to build network-manager-applet on Xubuntu 12.04 and was
wondering if it is possible to (and if so, how) build from the latest
git version and *not* off -devel packages. Autotools uses pkg-config
which restricts me
On Friday 29 of June 2012 10:30:35 Jiri Popelka wrote:
ping
___
networkmanager-list mailing list
networkmanager-list@gnome.org
https://mail.gnome.org/mailman/listinfo/networkmanager-list
Applied, ec821e0783150d9c02ab75ee4917b9b7d69f3220
Thanks!
On Thursday 14 of June 2012 16:59:24 paur...@gmail.com wrote:
network manager was pre-installed with ubuntu 12.04 on my laptop and
was accessible from my top panel system tray on the desktop until
today when I rebooted after a failed install of a different package
that was trying to add itself
On Monday 21 of May 2012 16:52:33 Dan Williams wrote:
On Thu, 2012-05-17 at 17:25 +0200, Jirka Klimes wrote:
On Wednesday 16 of May 2012 18:02:12 Dan Williams wrote:
On Mon, 2012-05-14 at 17:36 +0200, Jirka Klimes wrote:
On Thursday 22 of March 2012 11:10:56 Dan Williams wrote
On Wednesday 16 of May 2012 18:02:12 Dan Williams wrote:
On Mon, 2012-05-14 at 17:36 +0200, Jirka Klimes wrote:
On Thursday 22 of March 2012 11:10:56 Dan Williams wrote:
On Sun, 2012-03-18 at 23:43 +0530, Abhijeet Rastogi wrote:
Hi,
This is my first post here. I have tried
On Monday 14 of May 2012 17:12:53 Radek Vykydal wrote:
Hi,
I am trying to get NMIP4Config object after device becomes
NetworkManager.DeviceState.ACTIVATED but it is not
available immediately. Do I have to poll for it or is there any
event/state I can use?
Thanks,
Radek
The thing is
On Monday 07 of May 2012 19:45:13 Paulina Bórquez wrote:
Please, I need some help. I made a mistake and deleted the network manager
from mi control panel on the top of mi Ubuntu 8...and I can't find anywhere it
to replace it in the control panel.
...I'm not very smart in using my pc, but I am
On Wednesday 25 of April 2012 20:38:49 Larry Finger wrote:
I am running openSUSE 12.1 KDE using Rev 0.9.1.90-4.6.1-x86_64 ov
NetworkManager, and version 0.9.1+0.9.0-1.6.1-x86_64 of the
plasmoid-networkmanagement applet. For the most part, any problems that I
see are the fault of the underlying
On Thursday 22 of March 2012 11:10:56 Dan Williams wrote:
On Sun, 2012-03-18 at 23:43 +0530, Abhijeet Rastogi wrote:
Hi,
This is my first post here. I have tried googling and looking at the
manpage but no help.
We can use
$nmcli dev disconnect iface eth0
to
On Sunday 01 of April 2012 11:33:39 Russell Starr wrote:
How has more functionality I still have the same issue. When you go into
edit the home wireless network I can see a checkbox for 'available to all
users' but it is greyed out. I realise the security issues but I like the
quick internet
On Friday 23 of March 2012 01:10:23 4garbage wrote:
sensible advice, i've just moved checkbox into openvpn-advanced-dialog
I've fixed the patch and pushed, thanks.
cb81bdcea8b043ee8890cf930d88c9e30fc28612
Jirka
___
networkmanager-list mailing list
On Saturday 24 of March 2012 23:24:14 Robert Moskowitz wrote:
F16, Gnome3.
I am at a friend's house in Amsterdam trying to get connect to his
wireless and it is failing, so this message SHOULD go out when I get to
the KLM lounge tommorrow (that was working friday)...
A major defiency is
On Monday 19 of March 2012 15:26:49 Jirka Klimes wrote:
The patch adds a functionality to present a user with an error dialog (in
addition to writting a message to console), when there is a connection
failure.
Using the notifications would be an option, but I think a dialog is more
The patch adds a functionality to present a user with an error dialog (in
addition to writting a message to console), when there is a connection
failure.
Using the notifications would be an option, but I think a dialog is more
appropriate in this case, because notifications can be disabled and we
On Thursday 15 of March 2012 08:35:07 Dan Williams wrote:
On Wed, 2012-03-14 at 15:24 +0100, Jirka Klimes wrote:
The patch adds errors to libnm-glib's device classes.
The errors are returned in nm-device_connection_valid(dev,con,error)
when
the device and connection don't match
The patch adds errors to libnm-glib's device classes.
The errors are returned in nm-device_connection_valid(dev,con,error) when
the device and connection don't match.
Currently, the error is not used. But it could be useful for nmcli and
elsewere.
Jirka
From
On Friday 24 of February 2012 14:09:38 Dan Williams wrote:
On Wed, 2012-02-22 at 13:55 +0100, Jirka Klimes wrote:
The patch adds OlpcMesh device to libnm-glib.
Looks good to me, thanks!
Dan
Pushed to master as ff249e871f59a2a50cb27faf63f835f84ac9766d
Jirka
On Wednesday 22 of February 2012 16:54:11 Thomas Bechtold wrote:
Hi,
attached is a patch to add missing includes.
Cheers,
Tom
Pushed as 015fe77b2c4499fd00618f1722948ea1982bfacf
I've removed #include sys/stat.h from the patch as it was already there.
Thank you.
Jirka
On Sunday 19 of February 2012 17:58:09 Almo Nito wrote:
Hey Guys, im Trying to get Networkmanager to work together with wpa
supplicant.
They are both started fine with the dbus option but networkmanager doesn't
seem to interact with wpa supplicant (it neither tells that is running in
On Tuesday 21 of February 2012 13:58:55 Thomas Graf wrote:
For bonding-master:
TYPE=bond
BONDING_MASTER=yes
DEVICE=NAME
BONDING_OPTS=...
For bonding-slaves:
MASTER=NAME
The test cases currently fail for reasons I don't understand. When
dumping, both connection and reread
The patch adds OlpcMesh device to libnm-glib.
Jirka
From dd4d91eabd3b2a3e5cfc92787d34935cdc24d6ba Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ji=C5=99=C3=AD=20Klime=C5=A1?= jkli...@redhat.com
Date: Wed, 22 Feb 2012 13:34:07 +0100
Subject: [PATCH] libnm-glib: add NMDeviceOlpcMesh
MIME-Version: 1.0
The patch adds StateReason property to libnm-glib's NMDevice
and a getter function nm_device_get_state_reason().
Jirka
From b7c3fde18a11ff9c9eae8476842001071d8394a1 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ji=C5=99=C3=AD=20Klime=C5=A1?= jkli...@redhat.com
Date: Tue, 7 Feb 2012 10:48:16 +0100
On Tuesday 07 of February 2012 11:26:48 Thomas Bechtold wrote:
On Mon, 2012-02-06 at 17:31 -0600, Dan Williams wrote:
On Sat, 2012-02-04 at 21:08 +0100, Thomas Bechtold wrote:
---
src/nm-session-monitor-null.c|4 +++-
src/nm-session-monitor-systemd.c |4 +++-
2
On Thursday 02 of February 2012 11:23:15 Dan Williams wrote:
On Mon, 2012-01-30 at 16:56 -0800, Greg Suarez wrote:
Hi all,
My code communicates with NM via dbus c-api and I would like know how
to detect when NM restarts so I can tear down the old connection and
create a new one.
What
On Friday 23 of December 2011 00:28:25 devine-ml...@ddevnet.net wrote:
Greetings,
I have decided to write a Python script (we can't use libnm-qt, for
licensing reasons) that is called by the main program. Using QtDBus was
thrown in the too hard basket. Most things with Python DBus seem
On Friday 03 of February 2012 18:26:04 venkat.vu Pari wrote:
Hi,
I installed 11.10 Ubuntu server 64 bit OS into AMD processor. After that i
installed X , I3 window Manager and Network Manager. I used nm-tool to
display statics of Network Manager. it shown the following results.
nm-tool
On Monday 23 of January 2012 15:48:19 Olivier Deckmyn wrote:
Hi,
I’m building an Python application that has to connect and disconnect from
Wifi on linux box. It's my very first experience with d-bus and gobject.
I’m using NetworkManager layer, through the nice networkmanager lib found
in
On Wednesday 21 of December 2011 12:14:14 devine-ml...@ddevnet.net wrote:
I have hacked up the change-ipv4-address.cpp example in an attempt to
make it so that the program takes an interface name such as eth0 and
changes the IP address instead of a UUID.
The problem is:
Error: could not
On Thursday 15 of December 2011 16:58:24 Joseph wrote:
Hi -
I am getting the following error when trying to connect to the VPN:
NetworkManager[908]: ** Message: nm-pptp-ppp-plugin: (nm_phasechange):
status 11 / phase 'disconnect'
Here is the log for /var/log/messages. Is there a way
On Monday 05 of December 2011 06:27:33 Harish Mandowara wrote:
hi all,
what is the difference between network manager and wpa_supplicant.
Is network manager internally using wpa_supplicant.
NetworkManager is a software that manages network connections such as wired,
WiFi, WiMax,3G,
On Monday 28 of November 2011 21:12:23 Nathan Williams wrote:
This is a followup to my previous change here; the port-not-open
situation is better treated as a manageable error condition rather
than a programming error.
- Nathan
Applied, thanks.
Jirka
On Tuesday 29 of November 2011 17:33:24 Nathan Williams wrote:
After my previous change I went around looking for GError objects that
were being allocated but not freed, and turned up these two.
- Nathan
Applied, thanks.
Jirka
___
On Wednesday 30 of November 2011 05:03:14 Ajay Garg wrote:
Hi Jirka.
I have been stuck in a peculiar situation.
As I said before, after adding the '802-1x' settings. I am able to connect
to the WPA/WPA2-Enterprise network via ActivateConnection dbus-api.
However, if I pre-save the
On Wednesday 30 of November 2011 10:18:56 Arend van Spriel wrote:
Hi,
We are working on a wireless device driver and we create a netdev for
that. Currently, we get a NetworkManager message that there is no
applicable device found for the wireless connection. Can someone explain
how
come to an end...
Thanks for returning my confidence..
Regards,
Ajay
Jirka Klimes wrote:
Your connection is not valid.
You probaly have a connection which requires '802-1x' setting, but it is
missing.
The setting is required for ieee8021x or wpa-eap key management
On Monday 28 of November 2011 02:14:07 Adam Tauno Williams wrote:
I'm attempting to interrogate the state of the network condition via
Network Manager's D-Bus service. I can reliably get a value, but the
value seems incorrect.
According to
On Thursday 24 of November 2011 18:21:54 Thomas Bechtold wrote:
Hi Jirka,
thank you very much for the description and the fix. is it possible to
fix this in the 0.8 branch, too?
Cheers,
Tom
It needed some adjustments, but it's been in NM_0_8 too now.
Jirka
On Wednesday 23 of November 2011 07:33:07 Thomas Bechtold wrote:
Hi Dan,
any other idea why the example code does not work?
I've look into the problem. It showed up that it is really libnm-glib problem.
DeviceAdded and DeviceRemoved signals are seen in dbus-monitor output. And
they are
On Thursday 24 of November 2011 09:53:35 Ajay Garg wrote:
Hi all.
I am trying to activate a connection, using python-dbus apis. Following is
the log that I get in /var/log/messages.
NetworkManager[1451]: invalid connection Auto MTNL
(acfaf1bf82e3a1b6867357124f4e3cffe4963349):
On Wednesday 23 of November 2011 03:54:47 Githin Alapatt wrote:
I solved part of it -
I had not upgraded the kernel and the udev after dist-upgrade. I did
that today and I can now control the wired device using
network-manager.
Great.
However, I still cannot use my wlan0. I will check on
On Friday 18 of November 2011 18:48:22 Githin Alapatt wrote:
-- Forwarded message --
From: Githin Alapatt git...@gmail.com
Date: Thu, 17 Nov 2011 23:49:03 -0500
Subject: Re: Network manager not handling interfaces
To: Dan Williams d...@redhat.com
I have attached both files.
On Monday 21 of November 2011 03:05:08 金 晓烨 wrote:
I want to develop an application run in ubuntu 10.04 and this application
may have some IPC with the NetworkManager. When i installed the
NetworkManager 0.9.20 after ./configure make check make install
make installcheck it is all clear ,but
On Tuesday 15 of November 2011 18:23:19 Dan Williams wrote:
On Tue, 2011-11-15 at 13:38 +0100, Jirka Klimes wrote:
On Friday 30 of September 2011 01:05:20 Dan Williams wrote:
On Thu, 2011-09-29 at 20:59 +0400, Yury G. Kudryashov wrote:
Dan Williams wrote:
On Tue, 2011-09-27 at 10:27
On Tuesday 15 of November 2011 20:56:41 Bill C Riemers wrote:
I found the problem. I was wrong about needing to toggle the flag after
every boot.
Here is the problem, network manager is using the IPV6INIT=no flag, as the
flag IPV6 - IGNORE on a device. But it looks like to me that flag
On Friday 30 of September 2011 01:05:20 Dan Williams wrote:
On Thu, 2011-09-29 at 20:59 +0400, Yury G. Kudryashov wrote:
Dan Williams wrote:
On Tue, 2011-09-27 at 10:27 -0500, Dan Williams wrote:
Split config file reading and handling out of main.c so that it's
easier to extend later
On Tuesday 15 of November 2011 00:33:11 Dan Williams wrote:
On Thu, 2011-11-10 at 13:09 +0100, Jirka Klimes wrote:
On Wednesday 09 of November 2011 19:12:34 Dan Williams wrote:
On Wed, 2011-11-09 at 17:13 +0100, Jirka Klimes wrote:
Hello,
attached is a patch for sending secrets
On Monday 14 of November 2011 17:54:34 Matej Kovacic wrote:
Hi,
in NetworkManager I see a wireless network, which has an icon of a
monitor before the name (see attached screenschoot). Is this ad-hoc
network?
Yeah, that's an Ad-Hoc network.
You can check it via nmcli:
$ nmcli dev wifi
On Sunday 13 of November 2011 20:08:28 Lamarque V. Souza wrote:
Hi,
I have received this bug in bugs.kde.org and I think it belongs to NM,
not Plasma NM:
https://bugs.kde.org/show_bug.cgi?id=286433
What I think is happening is that PowerDevil (KDE's power management
On Thursday 10 of November 2011 11:13:11 Thomas Graf wrote:
Let git be nice to vim people.
Signed-off-by: Thomas Graf tg...@redhat.com
---
.gitignore |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/.gitignore b/.gitignore
index 63cf8e9..b97526e 100644
---
On Thursday 10 of November 2011 11:12:37 Thomas Graf wrote:
Builds cscope database, gets cleaned on clean
Signed-off-by: Thomas Graf tg...@redhat.com
---
.gitignore |1 +
Makefile.am |5 +
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/.gitignore
On Tuesday 01 of November 2011 01:29:26 marcos m. wrote:
Hello! I'm trying to write a connection file that is going to be
distributed on many computers.
It configures a wireless ad hoc connection, everything works fine except
that the connection doesn't appears on the nm-applet in gnome, it
On Monday 31 of October 2011 15:26:48 martin...@gmx.net wrote:
Hello list!
There was a change in the threads and mutexes API in glib starting with
version 2.31, see http://git.gnome.org/browse/glib/tree/NEWS. Especially
g_thread_init(), g_thread_create(), g_mutex_new() and g_mutex_free() are
On Monday 31 of October 2011 18:53:07 Alfredo C. Harvey wrote:
Hello, list.
Some day ago I posted this issue.
Would deeply appreciate some guidance -a lot of it. :-))
Huawei E173 USB módem for mobile broad band connection.
Fedora 15 Linux.
usb_modeswitch 1.1.7 -came with the system; yum
On Friday 21 of October 2011 17:01:41 Maxim Levitsky wrote:
Hi NM folks!
I haven't updated/looked at NM and rest of wifi stack for so long.
I stopped using Gnome too in meanwhile.
I noticed that recent NM versions allow to setup custom MAC per
interface, and it does work even in KDE,
On Wednesday 09 of November 2011 19:12:34 Dan Williams wrote:
On Wed, 2011-11-09 at 17:13 +0100, Jirka Klimes wrote:
Hello,
attached is a patch for sending secrets to agents when a new connection
is created (AddConnection, AddAndActivateConnection).
At present, when a new connection
On Thursday 10 of November 2011 10:13:19 qihang zhang wrote:
env:ubuntu11.10
I am trying to connect a hidden wirless newwork.
Once I change the ssid settings and click save, the ssid setting auto
change to {.
It's so weird
I think you used SSID value of 123.
The bug has been fixed recently
Hello,
attached is a patch for sending secrets to agents when a new connection is
created (AddConnection, AddAndActivateConnection).
At present, when a new connection is created, the secrets are not sent to
agents and thus not saved. One has to edit the connection again. It is easily
On Saturday 17 of September 2011 22:36:37 Vladimir Barbarosh wrote:
Hi. Can anyone help me please?
$ nmcli -f uuid,name con list
UUID NAME
d33c73fc-efbb-4a93-a1fe-9d4ff32ad9ed Wireless connection 1
0f2a2504-eca9-4e96-8bb9-1b617c56367e Auto eth0
UUID
On Saturday 17 of September 2011 00:26:32 Timothy Murphy wrote:
Timothy Murphy wrote:
I'm running NetworkManager 0.9.0-1.fc15 under Fedora-15
with kernel 2.6.40-4.fc5.i686.PAE on a ThinkPad T63.
When I hover over the NM icon in the panel I am told
Disconnected Wireless disabled in
There's probably a problem with kernel network driver.
What driver do you use? E.g. nm-tool can tell you.
I use Arch Linux with Gnome 3.0.2 and Networkmanager.
What kernel version and NM do you use?
Some days ago I changed my ISP service, from ADLS to a fiber one (on the
same ISP).
This
On Tuesday 30 of August 2011 12:59:54 Stefan Abeln wrote:
Hi,
I had to discover that the presets for the wireless broadband connection
for Bild-Mobil in Germany may lead to higher costs.
If you use the predefined settings for APN access.vodafone.de your
account will be charged by traffic
On Thursday 21 of July 2011 06:31:29 Dan Williams wrote:
On Tue, 2011-07-19 at 11:01 +0200, Jirka Klimes wrote:
The attached pached changes Device MAC address input entry in wired and
wireless connections in nm-connection editor to a combo-box with entry.
The combo-box list is pre-filled
The attached pached changes Device MAC address input entry in wired and
wireless connections in nm-connection editor to a combo-box with entry.
The combo-box list is pre-filled with available devices' MAC for the connection
type. Thus it is easier to restrict connections just to a particular
On Friday 01 of July 2011 23:02:37 Douglas C. MacKenzie wrote:
I forgot your comment on the carrier. It just happened again so I
checked the flag.
When the p6p1 network interface did not start, the flag was 0,
/sys/class/net/p6p1/carrier = 0
After I used the commands:
ifconfig
On Tuesday 21 of June 2011 07:00:00 Dan Williams wrote:
On Fri, 2011-06-17 at 12:58 +0200, Jirka Klimes wrote:
On Thursday 26 of May 2011 20:22:26 Dan Williams wrote:
A patch doing that is in the attachment.
A few concerns with the patch; it might get more complicated because
On Tuesday 21 of June 2011 07:03:55 Dan Williams wrote:
On Fri, 2011-06-17 at 00:04 +0200, Thomas Bechtold wrote:
Hi,
i missed the blacklist check in real_check_connection_compatible() for
ethernet and wifi. Patch attached.
Looks good; in the future we should have
On Tuesday 21 of June 2011 16:37:44 Darren Albers wrote:
On Tue, Jun 21, 2011 at 8:04 AM, Darren Albers dalb...@gmail.com wrote:
On Tue, Jun 21, 2011 at 1:08 AM, Dan Williams d...@redhat.com wrote:
On Mon, 2011-06-20 at 17:18 +0530, Ritesh Khadgaray wrote:
Hi
On Sat, Jun 18, 2011 at
On Thursday 26 of May 2011 20:22:26 Dan Williams wrote:
A patch doing that is in the attachment.
A few concerns with the patch; it might get more complicated because of
them. First, if the connection is deleted before the idle handler runs,
we'll be left with garbage. So we'd need to
On Wednesday 15 of June 2011 17:18:25 Manish S Runwal wrote:
When I tried with your method after continue its not showing gdb promt
again. One more thing.. and nm-applet is not crashing...
but still my problem is not yet solved...still I am not able to connect??
Yeah, the prompt doesn't
On Tuesday 14 of June 2011 15:43:18 Manish S Runwal wrote:
Any update on this ?
Please, could you repeat the steps Dan wrote, but after 1)
add an additional step:
1a) at the (gdb) prompt, type continue
It is needed, so that nm-applet is run again (it is stopped when gdb attaches)
Jirka
On Tuesday 14 of June 2011 15:57:29 Thomas Bechtold wrote:
Hi,
i have 2 connections in /etc/NetworkManager/system-connections
### Connection 1 ###
[connection]
id=Ethernet
uuid=be2ae05f-b04d-dcf6-efa3-1e63e0f0e111
type=802-3-ethernet
[ipv4]
method=auto
### Connection 2 ###
On Wednesday 27 of April 2011 22:36:32 Michal Sojka wrote:
Hi and thanks for the reply. Here is the log.
-Michal
1303936311.434616: EAP: EAP-Request Identity data - hexdump_ascii(len=44):
00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f _networkid=eduro 61 6d
2c 6e 61 73 69 64 3d 61 73
On Monday 06 of June 2011 12:07:27 Savio Sebastian wrote:
Hi all,
I am trying to change the ip addresses(switching between DHCP and manual)
using nm dbus with the qt i am able to get the devices list but how can i
change the ip addresses any examples available
Thanks
I've added an example
On Wednesday 08 of June 2011 10:10:09 Timo Babst wrote:
Hello, I am using NetworkManager Applet 0.8. It works great except for
one very annoying thing : there is a checkbox that says show password
and someone (luckily a friend) was able to copy my password just by
using this little funny
On Saturday 26 of March 2011 09:13:37 Aniket Oak wrote:
Hi,
I have a problem again. I can connect by cnetworkmanager but I dont know
how to disconnect.
I tried
*[aniket cnetworkmanager-0.21.1]$ ./cnetworkmanager --online=false*
*gives following error*
*Traceback (most recent call
On Thursday 09 of June 2011 14:00:29 David Narvaez wrote:
On Wed, Jun 8, 2011 at 2:40 PM, David Narvaez
david.narv...@computer.org wrote:
Ok. I don't have my laptop right now but I'll try nmcli nm as soon as
I get home. Thanks a lot for your fast answers, I now have a clear
picture of
1 - 100 of 215 matches
Mail list logo