2012/5/29 Daniel Ackwonu
> Hello!
>
> My name is Daniel and I am using Ubuntu on a new HP notebook. I have got
> the problem that my Realtek Wlan card(RTL8111) is not recognized by my
> operating system. I have tried a few things but it is still not working. If
> one of you could help that would
On 05/31/2012 05:31 AM, Daniel Ackwonu wrote:
Thank you for answering!
The Output of lspci -nn is:
daniel@linzuntu:~$ lspci -nn
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1705]
00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Device
[1002:9647]
00:01.1
On 05/29/2012 04:18 AM, Daniel Ackwonu wrote:
Hello!
My name is Daniel and I am using Ubuntu on a new HP notebook. I have got the
problem that my Realtek Wlan card(RTL8111) is not recognized by my operating
system. I have tried a few things but it is still not working. If one of you
could help t
On Mon, Mar 7, 2011 at 8:02 PM, Ozan Çağlayan wrote:
> On 07.03.2011 19:01, Dan Williams wrote:
>
>> That message can only come from a user applet property set request from
>> D-Bus.
>
> Actually this came to my mind right after posting the e-mail. It is the
> new KDE4 applet. Should I blame it fo
On Mon, 2011-03-07 at 19:02 +0200, Ozan Çağlayan wrote:
> On 07.03.2011 19:01, Dan Williams wrote:
>
> > That message can only come from a user applet property set request from
> > D-Bus.
>
> Actually this came to my mind right after posting the e-mail. It is the
> new KDE4 applet. Should I blame
On 07.03.2011 19:01, Dan Williams wrote:
> That message can only come from a user applet property set request from
> D-Bus.
Actually this came to my mind right after posting the e-mail. It is the
new KDE4 applet. Should I blame it for this problem?
Ozan Caglayan
--
Pardus Linux
http://www.pard
On Sun, 2011-03-06 at 18:03 +0200, Ozan Çağlayan wrote:
> On 05.03.2011 17:31, Dan Williams wrote:
>
> > Need a bit more debug here; the --log-level=debug logs would be useful
> > for starters.
> >
> > Dan
>
> Ok, the logs are attached. (This is the new NM 0.8.3.997)
Is this also with nm-applet
On 05.03.2011 17:31, Dan Williams wrote:
> Need a bit more debug here; the --log-level=debug logs would be useful
> for starters.
>
> Dan
Ok, the logs are attached. (This is the new NM 0.8.3.997)
Thanks,
--
Pardus Linux
http://www.pardus.org.tr/eng
After pressing the rfkill button on laptop:
On Sat, 2011-03-05 at 15:07 +0200, Ozan Çağlayan wrote:
> On 09.02.2011 19:50, Ozan Çağlayan wrote:
>
> > I think there are multiple issues in here. The one that I've mentioned
> > in the original thread and you've commented about may be triggered by
> > the bug that I've replied.
> >
> > So with
On 09.02.2011 19:50, Ozan Çağlayan wrote:
> I think there are multiple issues in here. The one that I've mentioned
> in the original thread and you've commented about may be triggered by
> the bug that I've replied.
>
> So with NM 0.8.2 on my Toshiba Portege R700 (iwlagn, exposing only a
> soft r
On 09.02.2011 18:40, Dan Williams wrote:
In current NM 0.8.x git, if you uncheck "Enable Wireless" from the menu,
NM writes that to the state file. That will then be in-force until you
re-check "Enable Wireless", even across reboots. This takes precedence
over rfkill because it was an explici
On Thu, 2011-02-03 at 13:00 +0200, Ozan Çağlayan wrote:
> Hi,
>
> I have bug reports about some inconsistencies caused by the state file and
> rfkill
> interactions like when the user kills the radio and then re-enables it, the
> WLAN can't be enabled
> unless the state file is edited manually a
2011/2/7 Ozan Çağlayan
> On 03.02.2011 13:00, Ozan Çağlayan wrote:
>
>> Hi,
>>
>
> And there's also another bug that I can reproduce:
>
> 1. Connect using WiFi
> 2. Soft block WiFi (result: sw_enabled=0, hw_enabled=1)
> 3. state file is updated to WirelessEnabled=false
> 4. Unblock wifi (result:
On 03.02.2011 13:00, Ozan Çağlayan wrote:
Hi,
And there's also another bug that I can reproduce:
1. Connect using WiFi
2. Soft block WiFi (result: sw_enabled=0, hw_enabled=1)
3. state file is updated to WirelessEnabled=false
4. Unblock wifi (result: sw_enabled=1, hw_enabled=1)
5. state file is
14 matches
Mail list logo