mandrake comes with gfcc. Simply type gfcc at the command prompt or whereis
gfcc and execute the path.
mysql.com should be installed already though (GPL)
Has anyone run mysql from the standard 7.0 distribution? Do you need to
install additional binaries? I can't seem to make it work and it appears
that the mandrake distribution is different from all the tutorials that I
read. Does anyone have any advice?
If you have a card, Linux probably doresn't support it. Try external
hardware that connects to your NIC. Then you have to worry about connection
type / protocol... I'm still waiting for my crappy PPPoE connection which
"doesn't work with Linux" according to Bell South
How do you change the IRQ setting on a module dependent NIC? I tried
"options driver irq=N, in /etc/conf.modules but this didn't work. I am
trying to get two NICs to work, but after reading the dmesg, it says both
IRQs are 0.
I had and have a similar problem. What about if you run ifconfig -a, does it
show the Eth1 and Eth0, but the Eth0 says "UP BROADCAST" and the Eth1 Says"
Broadcast." I have experienced that on both my Linux machines. I fixed one
by changing the BIOS, but the other computer is quite
I suppose you tried etherconfig and made sure it is active. Also try to see
if the routes are okay w/ ifconfig -a and get the BIOS right. If that
doesn't work, try and isadump and isapnp to set the thing right. Could be
poor PNP support for ISA card. Also make sure the driver is right.
Well, I made a little progress in that I can ping the internal IP (as
assigned to eth0) from the machine itself as well as the local host
127.0.0.1. However, I can't get it to ping the other machine and vise versa.
I tried a lsmod and it stated that the tulip driver was unused. Is that
Thanks for the reply. It doesn't work on mine for some reason. I really,
really, really wish I knew why since I have about eight of these little
suckers and I would like to use them. Does it show in Lothar? It doesn't
appear in mine.
I tried setting up a Linksys LNE100TX NIC on my HP / MDK7 / Win98 machine. I
have it up at boot as seen in my dmesg, but when I run ifconfig, eth0 states
Broadcast and not Up Broadcast. I can't ping it from my internal network and
I see the routes are correct. Mdk7 has the tulip driver
10 matches
Mail list logo
