Hi Folks, I'm at the end of my tether with this thing :-)) Having been through (and through and through) the PCMCIA howto untold times and Googled for hours, I'm no further ahead in getting this thing to stick on a stock Mdk9.1 install
The problem is getting the modules to load at boot, I can get the card recognised _only_ by modprobing ds, serial_cs and yenta_socket as root after the laptop as booted. I've always been under the impression that adding module names to /etc/modules would cause them to be installed at boot time I know I'm missing something really simple here but I'm dammed if I can see what it is. /etc/modules as follows: # /etc/modules: kernel modules to load at boot time. # # This file should contain the names of kernel modules that are # to be loaded at boot time, one per line. Comments begin with # a `#', and everything on the line after them are ignored. yenta_socket pcmcia_core serial_cs ds scsi_hostadapter ====== /etc/pcmcia/pcmcia # /etc/pcmcia/pcmcia # PCMCIA=YES PCIC=i82365 ====== /etc/modules.conf # /etc/modules.conf # alias tap0 ethertap options tap0 -o tap0 unit=0 probeall scsi_hostadapter usb-storage ide-scsi alias eth0 bcm4400 alias sound-slot-0 snd-intel8x0 probeall usb-interface usb-uhci ehci-hcd alias ieee1394-controller ohci1394 above snd-intel8x0 snd-pcm-oss ===== Any and all help , assistance, pointers and even brickbats gratefully received ... Cheers John
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com