Forever never goes beyond tomorrow.
> -----Original Message-----
> From: Stephen Liu [mailto:[EMAIL PROTECTED]]
> Sent: Friday, March 16, 2001 7:05 AM
> To: Charles A Edwards
> Cc: [EMAIL PROTECTED]
> Subject: Installation of Mandrake7.2 on ATA 100 hard disc
>
>
>
> Hi Charles,
>
> Could you please throw me some light re installation of
> Mandrake 7.2 on ATA
> 100 hard disc
>
> I'Will WO2 onboard controller
>
> From MSWindows > Settings > Control Panel > System > Device Manger >
> Storage Contoller > Resources, following data were found :
>
> a. Input/Output Range 01F0 - 01F7
> b. Input/Output Range 03F6 - 03F6
> c. Interrupt Request 14
> d. Input/Output Range 0170 - 0177
> e. Input/Output Range 0376 - 0376
> f. Interrupt Request 15
> g. Input/Output Range F000 - F000F
>
> Is it to make following changes :
>
> linux ide2 = 01F0-01F7, 03F8-03F8 ide3 = 0170-0177, 0378-0378
>
> Whether the formula ide2=a, (b+2) ide3=c (d+2) are still
> applicable ?
Stephen
This line of your message has me confused:
> I'Will WO2 onboard controller
When you get the I/O from Windows it leaves out part of the #
My fault for not mentioning it before.
To be sure you are using the proper values, boot the Mandrake installation
and at the
splash screen press F1.
At the boot prompt enter:
lspci -vv | less
Use the space bar to tab down to find the listing for your Promise
controller.
You will find 5 sets of heximal # stings giving the I/O address for the
card.
Write down the first 4, (a,b,c, and d) you also need only the the first
listing in each
set not both.
Reboot your system.
When the installation begins enter the I/O adresses for the controller using
the formula:
linux ide2=a, b+2 ise3=c, d+2
The spaces and comas must be used
linux(space)ide2=a,(space)b+2(space)ide3=c,(space)d+2
Charles (-:
Forever never goes beyond tomorrow.