upon a cold boot, my VG800 1280x1024 panels run in textmode ok.
but after starting X, my panels show a "sync out of range"
message when i toggle to a virtual console, or, when i
leave X. so i blindly issue either a startx or a halt after
leaving X.
this was not the case when i was using FX70 102
Dear xfree86:
after I upgrade in debian, my originally
preconfiured progeny 1.0 (probably using frame buffer) X be mop
out
I tried both text and graphic config all not
success(graphic config, I always fail when I configure mouse-it freese in
console 8(I have a Logitech 2 bottom with r
Dear xfree86.org:
after I upgrade in test of
debian, on my 2.2.18 it mop out my x, gdm is not work
if I restartx, it reponse:
/usr/X11R6/lib/X11/xinit/xserverrc line 2:
/usr/bin/X11/X: No such file or directory
pleease help
it work in my progeny1.0 preconfigure
os
sincere Eric
Hi,
Bear in mind that no one can really help you if you just say "my screen
shuts down" you aren't giving enough information. The first place to
find some answer is the file /var/log/Xfree86.log (or something quite
similar) If you send it along with the file /etx/X11/XF86Config-4 (your
server's co
Sorry for my English.
I tried to install Linux Mandrake 8.2 with XFree86
4.2.0
in my ASUS L3562.
Even changing many times XF86Config-4 file, when I
launch X the screen get black.
I hope that someone can help me with his
XF86Config-4, because the ASUS didn't.
I asked if they could give Horizon
yes , I know the spec of my monitor of kds Xflat 17e
3dforce B-16, 16M print on my card
HOLTEK
HT27C512-70
A022Z0612-2
my most current config is using xfree86 4.0
after that, startx
it response
(EE) no device detected
it assum my card on pci bus: PCI:01:00:0
maybe that is not correct,
it is in
Hi,
is it correct that the 4.x driver for the Cirrus Logic 5430 chip does not
support interlacing while the 3.3.6 driver (XF86_SVGA) did ?
If yes, is it likely that support for interlace will be added to the
4.x driver ?
The reason I ask is that I was able to get 1024x768 at 16 bit with 3.3.6 wh
hi,
i have no experience with netbsd. but one of my friend has r31 thinkpad which has
i830m onboard. we have to use vesa driver instead of i810 as suggested in dirver page
of xfree86. and we are happy now. ou yes we are using freebsd.
hth.
psr
On Sat, Dec 07, 2002 at 11:03:07AM -0800, Marsh
Chuck Gelm wrote:
> How do I make my screen size the same as my window size?
> I do not want to scroll to see the entire screen.
In your /etc/X11/XF86Config-4 file, remove the line beginning "virtual"
that follows the color depth you are using, or on the modes line remove
all resolutions higher
On Saturday 07 December 2002 07:40 pm, rq8ia wrote:
> i fixed this problem, as root, by editing /etc/lilo.conf, then running the
> command lilo.
>
> in particular, i changed
> vga=791
> to
> vga=795
> then ran lilo.
>
Hmmm, I have never experienced that sort of problem with setting the vga mod
i fixed this problem, as root, by editing /etc/lilo.conf, then running the command
lilo.
in particular, i changed
vga=791
to
vga=795
then ran lilo.
appearantly, 791 was fine for my 1024x768 panels
but a different value is need for 1280x1024 panels
here is a table that i ripped off from
ht
--- Dennis Veatch <[EMAIL PROTECTED]> wrote:
> On Saturday 07 December 2002 05:10 pm, Vern W Heesch wrote:
> > On Sat, 7 Dec 2002 13:28:25 -0800 (PST)
> >
> > "rq8ia" <[EMAIL PROTECTED]> wrote:
> > > --- Dennis Veatch <[EMAIL PROTECTED]> wrote:
> > > > On Saturday 07 December 2002 04:03 pm, rq8ia
On Saturday 07 December 2002 05:10 pm, Vern W Heesch wrote:
> On Sat, 7 Dec 2002 13:28:25 -0800 (PST)
>
> "rq8ia" <[EMAIL PROTECTED]> wrote:
> > --- Dennis Veatch <[EMAIL PROTECTED]> wrote:
> > > On Saturday 07 December 2002 04:03 pm, rq8ia wrote:
> > > > upon a cold boot, my VG800 1280x1024 panels
Hello!
I am running a Dell Latitude C600 laptop with a Sharp TFT display.
The graphics card is an ATI Mobility M3. I've configured the system
with Mandrake, Red Hat, and Gentoo. While all of them will configure
properly and recognize the card, the X server always ends with the
message "No
On Sat, 7 Dec 2002 13:28:25 -0800 (PST)
"rq8ia" <[EMAIL PROTECTED]> wrote:
>
> --- Dennis Veatch <[EMAIL PROTECTED]> wrote:
> > On Saturday 07 December 2002 04:03 pm, rq8ia wrote:
> > > upon a cold boot, my VG800 1280x1024 panels run in textmode ok.
> > >
> > > but after starting X, my panels sho
Hi @ ALL !
I wonder if it's possible to set up a 2nd vt with an X-server running. This
server should be a XDMCP-server for remote-logins. My original server should
be working on the 1st vt as well. Now a remote-client should be able to
connect the 2nd server.
Interesting would also be the link
--- Dennis Veatch <[EMAIL PROTECTED]> wrote:
> On Saturday 07 December 2002 04:03 pm, rq8ia wrote:
> > upon a cold boot, my VG800 1280x1024 panels run in textmode ok.
> >
> > but after starting X, my panels show a "sync out of range"
> > message when i toggle to a virtual console, or, when i
> > l
Am I getting above message because my monitor (
Compag mv500) is not configured properly?? I have reconfigured several time with
xconfigurator, I get the xdisplay which turns to blue-green but when I try to do
something with the screen I get this error message. Help!
Bill
On Saturday 07 December 2002 04:03 pm, rq8ia wrote:
> upon a cold boot, my VG800 1280x1024 panels run in textmode ok.
>
> but after starting X, my panels show a "sync out of range"
> message when i toggle to a virtual console, or, when i
> leave X. so i blindly issue either a startx or a halt afte
upon a cold boot, my VG800 1280x1024 panels run in textmode ok.
but after starting X, my panels show a "sync out of range"
message when i toggle to a virtual console, or, when i
leave X. so i blindly issue either a startx or a halt after
leaving X.
this was not the case when i was using FX70 102
Howdy, Y'all:
How do I make my screen size the same as my window size?
I do not want to scroll to see the entire screen.
Chuck
___
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/lis
hi. i'm considering getting one of the new tablet pc's and running netbsd on it.
in reviewing the Intel 830/845G driver page, it looks like this os/driver
combination is not supported, or maybe it's just the new driver upgrade that
hasn't been tested yet with netbsd.
any other info?
thanks,
/mt
Howdy, Y'all:
Where do I change this key ?
I have no (unshifted) '+' on my laptop keyboard.
Control-Alt-Shift-"=" does not work?
Chuck
Aedificator wrote:
>
> To increase your resolution press CTRL-ALT-+.
> - Original Message -
> From: Robert Niemeyer
> To: [EMAIL PROTECTED]
>
Thanks everyone...CTRL-ALT-+ worked great! I'll figure out how to mod
the conf file later (hopefully)
Hi Rob,
Are you able to change rez by using the
and/or "+" hotkeys ? If so and you're asking how to
change the startup 'default' rez - then I'll let some-
one else answer that, as I'm not too up on manually
editing the conf (as you can probably tell from my orig
post about the problem I'm having
when doing 'make install', there is no 'security/pam_appl.h' file.
___
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
Hello Detlef,
My hardware is next:
* Mainboard: Intel PIII 1000 MHZ with chipset Intel 815.
* I've connected a panoramic Samsumg Flat Panel (LTM170W) thought the DVI interface.
* The problem is that I have no DDC2B and EDID support for this monitor and the BIOS don't recognize the monitor. Therefo
To increase your resolution press CTRL-ALT-+.
- Original Message -
From: Robert Niemeyer
To: [EMAIL PROTECTED]
Sent: Saturday, December 07, 2002 6:00 AM
Subject: [Newbie]Resolution
Does anyone know how to change the monitor resolution? I installed
FreeBSD 3.5.1 and XFree86 in
28 matches
Mail list logo
