Hi,
I'll guess that the framebuffer driver is not loaded. Did you insmod or
modprobe (equivalent things) the framebuffer prior to starting X?
Nat
On Mon, 2002-10-28 at 05:36, rahul kalaskar wrote:
> I figured that. I moved the config to XF86config. Still the problem
> persists.
> I wonder why
You may want to try replacing the relevant sections with:
# Graphics device section
# **
Section "Device"
Identifier"Generic VGA Card"
VendorName"Unknown"
BoardName "Unknown"
Chipset
I figured that. I moved the config to XF86config. Still the problem
persists.
I wonder why it says /dev/fb0 not found. I read some where I may need
/dev/fb0current?
Thanks!
Rahul
Lionel Lecoq wrote:
If you are running X 3.3.6 then X uses XF86Config and NOT XF86Config-4. Any change in this la
If you are running X 3.3.6 then X uses XF86Config and NOT XF86Config-4. Any change in
this later
file has no effect ...
Lionel
--- rahul kalaskar <[EMAIL PROTECTED]> wrote:
> I am using XFree86-FBDev-3.3.6. This was shipped with XFree86-4.2.0 set
> of rmps. Should it get the lastest XFree86-FBDe
I am using XFree86-FBDev-3.3.6. This was shipped with XFree86-4.2.0 set
of rmps. Should it get the lastest XFree86-FBDev?
Lionel Lecoq wrote:
It looks as if you were using an X 3.3.6 server (unless I am mistaken)! Is that what you intend?
Lionel
--- rahul kalaskar <[EMAIL PROTECTED]> wrote:
It looks as if you were using an X 3.3.6 server (unless I am mistaken)! Is that what
you intend?
Lionel
--- rahul kalaskar <[EMAIL PROTECTED]> wrote:
> Hi all,
>
> I am tring to configure Frame Buffer for my Intel 840G video card. I am
> using RedHat rmps for frame buffer support. My XF86Config
Hi all,
I am tring to configure Frame Buffer for my Intel 840G video card. I am
using RedHat rmps for frame buffer support. My XF86Config-4 is
configured to use fbdev as the driver and X is linked to XF86_FBDev.
When I startx , I get an error
open_framebuffer: failed to open /dev/fb0 (no such
