Thanks Brian - it's fixed in nfdump-1.6.11 which will be released most likely
tomorrow. It will also support ASA 9.1 data.
- Peter
On 21/11/13 10:55 AM, Brian Candler wrote:
> On 21/11/2013 09:23, Peter Haag wrote:
>> Hi Brian,
>> It looks to me, as you did not enable nsel at compile tim
On 21/11/2013 09:23, Peter Haag wrote:
Hi Brian,
It looks to me, as you did not enable nsel at compile time. You need to
run at least ./configure --enable-nsel and make, make install
Ah yes, you're quite right. I had only done
./configure --enable-nfprofile --enable-nftrack
and didn't realise yo
Hi Brian,
It looks to me, as you did not enable nsel at compile time. You need to
run at least ./configure --enable-nsel and make, make install
This enables a couple of things:
- Let's you make use of -Tnsel for the collector. Of course you can
use -Tall or +27, +28 at any time though.
- Enables
Capturing Netflow/IPFIX records from Cisco ASA running 8.4.7 firmware,
to nfdump 1.6.10p1.
When I look at outbound flows, I see the source (private) IP and the
destination (public IP). But when looking at inbound flows, the
destination address is the public IP, not the private IP to which it is
