Nope, I got them all in right
On Monday, May 9, 2016, Richard Potter wrote:
> When I did the one on my laverda I honed the bore and used all new seals
>
> And had the same problem as you turns out I put the spring in first
> instead of last J
>
>
>
> *From:* nighthawk_lovers@googlegroups.com
>
Good comments
Sent from my iPhone
> On May 9, 2016, at 3:11 PM, Richard Potter wrote:
>
> Or last not first
> It has been a while
> But that fixed the problem
>
> From: nighthawk_lovers@googlegroups.com
> [mailto:nighthawk_lovers@googlegroups.com] On Behalf Of Richard Potter
> Sent: Monday,
Or last not first
It has been a while
But that fixed the problem
From: nighthawk_lovers@googlegroups.com
[mailto:nighthawk_lovers@googlegroups.com] On Behalf Of Richard Potter
Sent: Monday, May 09, 2016 12:56 PM
To: 'nighthawk_lovers@googlegroups.com'
Subject: RE: [Nighthawk Lovers] Re: Yamaha XJ
When I did the one on my laverda I honed the bore and used all new seals
And had the same problem as you turns out I put the spring in first instead of
last ☺
From: nighthawk_lovers@googlegroups.com
[mailto:nighthawk_lovers@googlegroups.com] On Behalf Of Graham Rogers
Sent: Monday, May 09, 2016
Yes it did work before I rebuilt it. In fact I was able to pump the piston
out of the caliper which was frozen in there . After cleaning out the
caliper and piston, reassembling, I naturally used new brake fluid and it
was at that point I no longer had pressure at the master cylinder, Graham
On Mo
Re adjusted
The PO had it so rich it look like a diesel when you hit it
Set clip in top notch ( it was in the 2ed from bottom )
From: nighthawk_lovers@googlegroups.com
[mailto:nighthawk_lovers@googlegroups.com] On Behalf Of Javier Garcia
Sent: Friday, May 06, 2016 7:30 PM
To: nighthawk_lovers
Su
Check the condition of the oil. If needed change oil & filter.
Sent from my iPhone
> On May 9, 2016, at 7:01 AM, Mike Saemo wrote:
>
> 2004 Honda 250 Nighthawk.
> Hello fellow nighthawkers lol. Was hoping to get some insight on a clutch
> issue I've been experiencing. Im a learner rider now i
Did it work before you rebuilt it?
From: nighthawk_lovers@googlegroups.com
[mailto:nighthawk_lovers@googlegroups.com] On Behalf Of Graham Rogers
Sent: Sunday, May 08, 2016 5:47 PM
To: nighthawk_lovers@googlegroups.com
Subject: [Nighthawk Lovers] Re: Yamaha XJ650 front brakes
Cylinder bore is cle
2004 Honda 250 Nighthawk.
Hello fellow nighthawkers lol. Was hoping to get some insight on a clutch issue
I've been experiencing. Im a learner rider now in A.C.T for 3 months now.
Finally confident to go a bit quicker on more open roads. So my issue is I was
doing just over 100 on a 100km speed
