Thanks so much.
On Fri, Jul 24, 2020 at 5:27 PM David Shevlin wrote:
> Same 0.5-inch spacing on mine.
>
>
> *From:* Darin Hatton
> *Sent:* Friday, July 24, 2020 3:55 PM
> *To:* nighthawk_lovers@googlegroups.com
> *Subject:* Re: [Nighthawk Lovers] 700s Nighthawk: How far sh
Same 0.5-inch spacing on mine.
From: Darin Hatton
Sent: Friday, July 24, 2020 3:55 PM
To: nighthawk_lovers@googlegroups.com
Subject: Re: [Nighthawk Lovers] 700s Nighthawk: How far should the rear brake
pedal be from the engine.
On Fri, Jul 24, 2020, 3:54 PM Darin Hatton wrote:
Here is
Here is where mine sits
On Fri, Jul 24, 2020, 2:24 PM Graham Rogers
wrote:
> I’ve never had trouble bending either brake pedal or gear shifter just
> using big pliers of sorts. Never had to heat them up. They bend pretty
> easy. You can take the brake pedal off the bike and put it in a vice and
I’ve never had trouble bending either brake pedal or gear shifter just
using big pliers of sorts. Never had to heat them up. They bend pretty
easy. You can take the brake pedal off the bike and put it in a vice and go
to it or do it on the bike. If it doesn’t look bent just pry it out a
little usin
Just got the bike. The pedal seems to need my foot to be uncomfortably
close to the engine to operate the pedal. Pedal does not look bent. If it
turns out that the pedal is fine and it is me who would like it further
away from the engine can I safely bend it? I am told that if I do this with
he