Sorry Tommy, may as well look for that next...
On Fri, Oct 11, 2019, 9:27 PM Tommy Hill wrote:
> But does your reverse work?
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop
Sounds like you need to clean all the light switch fitting with contact
cleaner. I did it recently with my 650. I took switch apart and cleaned all the
contacts, then used electrical grease on mechanism on reassembly. Works a treat
now.
Sent from my iPhone
> On 12 Oct 2019, at 09:43, Darin
Doesn't turn off when you push in on it?
On Sat, Oct 12, 2019, 1:46 AM Holger Selover-Stephan
wrote:
> On my 700S the lever doesn't stay on the side the indicator is active on.
> To cancel, I have to nudge it into the opposite direction. So, to blink
> right I shove the lever to the right, and
On my 700S the lever doesn't stay on the side the indicator is active on.
To cancel, I have to nudge it into the opposite direction. So, to blink
right I shove the lever to the right, and the right indicator starts
blinking. But when I then release the lever it immediately snaps back to
the
But does your reverse work?
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to nighthawk_lovers+unsubscr...@googlegroups.com.
To view this
howdy darin, it's like tommy said on the 700S, ...same button/lever you
flip left or right to turn on the signalPUSH IN on it to shut off signal
On Wednesday, October 9, 2019 at 4:51:16 PM UTC-4, Darin Hatton wrote:
>
> After much looking in the factory service manual for my 700s I still
>