Hi,
First of all thanks alot for your fast response.
You have said that :
"To answer your question: NO, it is absolutely not realistic to deduce
from a result of 150m transmission range to be in an indoor scenario."
Do you mean that I cannot assume an indoor range to be 150m,
.
That also worked for configuring nam-1.13, but that failed at the linker stage
bleating
Undefined symbols:
"__TkCreateXEventSource", referenced from:
_TkpInit in tkUnixInit.o
so I grabbed nam-1-20080222.tar, which failed with the same linker error.
(I was using the available Tcl
Hi,
Gabrial Monty schrieb:
> I have to simulate an infrastructured wireless network behavior using
> different wireless cards specifications. I want to test the network
> performance using 802.11a cards with high transmit power level (not less than
> 600 mW). I have choosen the XtremeRange5
Hi,
is realistic to assume that thw transmit power level is 400/500/600 mW with
Tx range = 150m for 802.11a based networks?
please I need answer for this question
please help
-
Looking for last minute shopping deals? Find them fast with
Dear all,
I have to simulate an infrastructured wireless network behavior using
different wireless cards specifications. I want to test the network performance
using 802.11a cards with high transmit power level (not less than 600 mW). I
have choosen the XtremeRange5 card but what I have
Hello,
I want to know if there is some code or ns command, to ask a new
routing, i mean, to update the AODV routing tables.
Because sometimes it doesn't work.
Cheers...
Jamal Toutouh El Alamin
NEO Group - Networking and Emerging Optimization
Un
Hello All,
I have a problem when I try to simulate a wireless network, just
when I use DSR routing protocol. When I use others I have not
any problem.
The problem is that during the simulation there is an EXCEPTION
with the next message:
7 [main] ns 1880 _cygtls::handle_exceptions: Exception:
Jamal Toutouh El Alamin
NEO Group - Networking and Emerging Optimization
University of Malaga
Phone: (+34) 952 13 33 03
Addres:
E.T.S Ingenieria Infor
Hello all ns-users,
I have sent the e-mail below, but couldn't get any response. If anyone has the
answer of my question, it will be appreciated.
Regards,
Semra
Kimden: Semra YILMAZ
Gönderilmiş: Paz 17.02.2008 18:21
Kime: ns-users@ISI.EDU
Konu: how to change the
I'm using nam 1.11 under Windows XP / Cygwin 1.5.25. In my application,
I need to create nodes and links dynamically, i.e. after the
initialization phase. This feature was introduced in nam 1.6. Creating
nodes and links dynamically does work, but it is not possible to
visualize the transmission of
Hi All,
I've installed RSVP/ns and it runs well with examples in RSVP/ns document by
Marc Greis..
I've ran ns~\tcl\ex\rsvp\rsvp_distinct.tcl successfully, and got the same data
as Figure 5( Measurements for distinct reservations) in RSVP/ns document.
Then,I added trace-ralated codes in rsvp_di
11 matches
Mail list logo