Hi Paulo,
Sorry to bother you, but I have just seen your question and I have a similar
problem:
I would like a source node (n0) to broadcast CBR packets via UDP to 1 hop
neighbors (n1,n2) in a wireless dhoc network (either CMU 802.11 or 802.11
ext). After if that succeeds, I would like to incre
Hi Paulo,
Read carefully the documents I had pointed before! They would
explain you how to proceed.
Regards,
Alysson
2012/5/2, Paulo Robson S. F. :
> Hi guys again :)
>
> Sorry for too much questions :)
>
> When I tried to add the scenario above ( broadcasting + cbr traffic flow)
> the dst_
Hi guys again :)
Sorry for too much questions :)
When I tried to add the scenario above ( broadcasting + cbr traffic flow)
the dst_addr_ -1 didn't work anymore, the simulation finishes but the trace
file ends incomplete.
For my luck, i tried, i don't know why, to set dst_addr_ -2 and works!
In t
Hi,
I forgot to show this page:
http://www.math.unipd.it/~cpalazzi/fastbroadcast.html
what do you think of this broadcast agent?
Att
2012/5/2 Paulo Robson S. F.
> Hi guys, thanks for the feedback.
>
> Alysson,
>
>
> The Agent PBC is a broadcast but is only ping, I tested it before and is
> n
Hi guys, thanks for the feedback.
Alysson,
The Agent PBC is a broadcast but is only ping, I tested it before and is no
good for me.
I dont understand this agent Flooding at all, I need to use it?
Are you saying the only way to broadcast is to use one of those agents?
My way is wrong?
Another
Hi,
You can see it on ns-2.34/tcl/ex/wireless-flooding.tcl and
ns-2.34/tcl/ex/802.11/broadcast_validation.tcl witch uses a specific
broadcast agent.
Further details in ns-2.34/common/packet.h on lines 676 and 677:
init(p); // Initialize bits_[]
(HDR_CMN(p))->next_hop_ = -2; // -1 res
Hi,
I have no solution for you in NS2. However, I have a remark on your
address/port choice.
I guess that by choosing -1, you fill the address field with 255.255.255.255 as
IP address
in dotted decimal notation? The port number choice of 0 is a bit strange.
Although you are using IP broadcast
Hi,
I want to broadcast a packet using an udp agent. I found some solutions at
this maillist but
neither satisfactory.
I just want to send broadcast packet from 1 node to another 2 nodes in his
range. My idea was
change the dst ip to -1 and dst port to 0 because i saw somewhere that is
the way t