After apply the patch of obs simulator with ns2.27...i have following
error...
I have patch the obs simulator with ns2.27...after the make i see following
msg
make[1]: Entering directory
`/home/pinakini/ns-allinone-2.27/ns-2.27/indep-utils/cmu-scen-gen/setdest'
make[1]: Nothing to be done for
.
( The first 'make' is done with the './install' command.)
-
--
View this message in context:
http://network-simulator-ns-2.7690.n7.nabble.com/ns-make-error-tp29623p29624.html
Sent from the ns-users mailing list archive at Nabble.com.
hi,I m using ns-2.29 with mannasim and i have made few changes in leach
protocol by adding two new send member functions “Hello” and Reply and its
corresponding receive member function recvhello and recvreply just like
cluster head advertisement and join request funcions in leachApp.cc and
Try this one :
sudo apt-get install xgraph
2012/11/12 Muhammad Javed javed_u...@yahoo.com
Hi all,
I have installed NS2.34 it is working fine but xgraph is not working, I go
to xgraph directory located into ns-allinone-2.34 when I executed make it
displaying errors as below:
Hi all,
I have installed NS2.34 it is working fine but xgraph is not working, I go to
xgraph directory located into ns-allinone-2.34 when I executed make it
displaying errors as below:
[root@localhost ns-allinone-2.34]# cd xgraph-12.1
[root@localhost xgraph-12.1]# ./configure
loading cache
plz help,
I am adding a new protocol to ns2.29 called MPOLSR. from
http://www.jiaziyi.com/documents/SER29_mpolsr.rar
After following these commands :
make clean
export CC=gcc34 CXX=g++34 ./configure make
I am getting this error:
no rule to make target 'olsr/OLSR.o' needed by ns.
*Dear all,*
* I am having a problem when I run make command in ns2.29.*
*The error I am getting is:*
*
*
*make: *** No rule to make target 'olsr/OLSR.o',*
*needed by 'ns'. Stop.*
* Ns make failed!*
*
*
*Please help me in resolving this error.*
*
*
*
*
*Best regards,*
*Mohit Bhasin*
I am patching ns 2.28 with the tkn's edca model ,i get the following
error message during the make process
/mac/802_11e -o mac/wireless-phy.o mac/wireless-phy.cc
mac/wireless-phy.cc: In member function `virtual void
WirelessPhy::sendDown(Packet*)':
mac/wireless-phy.cc:238: error: `RECVING'
://getch.wordpress,com
Mailing list guidelines: http://goo.gl/xC874
--
View this message in context:
http://old.nabble.com/Re%3A-Patched-NS-Make-error-tp30667645p30691265.html
Sent from the ns-users mailing list archive at Nabble.com.
Christopher Ogirri wrote:
I should note now that in order to install ns2.1b9 I had to basically
install a much older version of gcc, precisely gcc 3.3.6.
How did you manage to downgrade to a lower version of gcc?
What OS are you using?
For the downgrading I used the command:
rpm -Uvh
the file so that anyone can go through it.
Sir! Attachments are not permitted in messages to mailing list.
-
---
ManojKumar.A
---
Blog: http://getch.wordpress,com
Mailing list guidelines: http://goo.gl/xC874
--
View this message in context:
http://old.nabble.com/Re%3A-Patched-NS-Make-error
I have currently successfully installed ns2.1b9 on my CentOS 5 machine.
After installation, I implemented the patch listed
herehttp://www.cs.unh.edu/cnrg/people/sowmyam/ns-atm/
.
Following the readme instructions( also found on that page) I was able to
apply the patch and ./configure.
I
Hello Everyone,
I am an ns2 newbee and i am trying to install ns2.27 and not a new verison
because the module i want to work with is implemented in this version and not
compatible with any other version. The error i get is stated below. Please i
will appreciate any help I can get as I am
Dear All,
i've added the CBRP protocol in NS2.34 when typing make clean make i've
got an error because of i have two .h file that mutually include each others
this error apears only over a fedora13, Ubunto,Suse11.2 system
but when Using the same code over Redhat 9 there was no error
could any
hi all..
i try ti implement antnet on NS-2.33
but i've problem when try to make install
-
when i run make. the last report like this :
for i in indep-utils/cmu-scen-gen/setdest indep-utils/webtrace-conv/dec
indep-utils/webtrace-conv/epa
hello,dear all:
I am recently working on the vanet routing focused on GPSR protocol.
I downloaded the patch from website:
http://www.cn.uni-duesseldorf.de/staff/kiess/software/hls-ns2-patch
After apply it, when i do make,it shows
make:***[gpsr:gpsr-o] error 1.
because there's ambiguous
hi all
while i am using make in my ns directory(ns-2.31):
$ make clean; make depend; make
it gives the following error
Makefile:74: *** missing seperator (did you mean TAB instead of 8 speaces?)
stopped
Makefile:74: *** missing seperator (did you mean TAB instead of 8 speaces?)
stopped
-Mensaje original-
De:miba...@unicauca.edu.co
Fecha:18 de April de 2009
hi all,
i have this problem when typing make in ns-2.26 directory:
include -I/usr/local/ns-allinone-2.26/include -I/usr/include/pcap -o
proxytrace.o proxytrace.cc
In file included from /usr/include/stdlib.h:433,
hi all,
i have a problem when typing make in ns-2.26 directory:
include -I/usr/local/ns-allinone-2.26/include -I/usr/include/pcap -o
proxytrace.o proxytrace.cc
In file included from /usr/include/stdlib.h:433,
from proxytrace.cc:7:
/usr/include/sys/types.h:194: declaration
salam alikom
how are u
i need a help from u
when i recompile ns2 to reflect changes that i made in ns2 files by typing make
clean
and make in ns2 directory appear to me the following error:
std -DUSE_SINGLE_ADDRESS_SPACE -Drng_test -I. -I.
Hello all ns users,
I am using Ubuntu and ns-2.31.
I have patched the AOMDV
After patching i did make but I have got following error:
trace/cmu-trace.o: In function `hdr_aomdv::access(Packet const*)':
cmu-trace.cc:(.text._ZN9hdr_aomdv6accessEPK6Packet[hdr_aomdv::access(Packet
const*)]+0x7):
Hi all,
I am getting an error message while recompiling AODV after some changes i
made to aodv.cc.
I made those changes yesterday, recompiled successfully and run a sample tcl
file to make sure that those changes are having an effect on the results.
Everything looked to be ok, until today where
Hello
I'm trying make and I get the following error.
I am using ns-allinone-2.29 on cygwin.
---
$ make
g++ -c -Wall -DTCP_DELAY_BIND_ALL -DNO_TK -DTCLCL_CLASSINSTVAR
-DNDEBUG -DUSE_
SHM -DHAVE_LIBTCLCL -DHAVE_TCLCL_H -DHAVE_LIBOTCL1_11
-DHAVE_OTCL_H -DHAVE_LIBTK
8_4
23 matches
Mail list logo