The OMSA did not show any log messages.
-Original Message-
From: Scott Kaufman at HQ [mailto:skauf...@ittesi.com]
Sent: Friday, June 12, 2009 10:55 AM
To: NT System Admin Issues
Subject: RE: Press F1 to continue after updates.
Are you getting a System FRU not programmed message? Or an
Network Analyst
ITT ESI, Inc.
-Original Message-
From: Steve Kelsay [mailto:kels...@sctax.org]
Sent: Friday, June 12, 2009 9:34 AM
To: NT System Admin Issues
Subject: Press F1 to continue after updates.
After rolling out the MS updates last night, I had three different models
of serve
ilto:kels...@sctax.org]
Sent: Friday, June 12, 2009 9:34 AM
To: NT System Admin Issues
Subject: Press F1 to continue after updates.
After rolling out the MS updates last night, I had three different models of
servers that failed to restart, having the "Press F1 to Continue" message.
Press
Remote Insight Lights Out too ! ( HP/Compaq )
Erik Goldoff
IT Consultant
Systems, Networks, & Security
_
From: James Rankin [mailto:kz2...@googlemail.com]
Sent: Friday, June 12, 2009 10:02 AM
To: NT System Admin Issues
Subject: Re: Press F1 to continue after updates.
DRAC rules - saves getting up and moving to access to the console
2009/6/12 Steve Kelsay
> After rolling out the MS updates last night, I had three different models
> of servers that failed to restart, having the "Press F1 to Continue"
> message. Pressing it let it start properly, but I had to d
Admin Issues
Subject: RE: Press F1 to continue after updates.
No, Nothing that was not there before the update. Two were 1 year old
Dell R900s, which had completed a health check by Dell earlier in the
day, and rebooted fine then so it only started right after the updates
on those two machines. The
: Press F1 to continue after updates.
No, Nothing that was not there before the update. Two were 1 year old Dell
R900s, which had completed a health check by Dell earlier in the day, and
rebooted fine then so it only started right after the updates on those two
machines. The other two models did
continue after updates.
Do you have any hardware-level errors on these machines? Low RAID cache
batteries, degraded raids, etc?
-sc
> -Original Message-
> From: Steve Kelsay [mailto:kels...@sctax.org]
> Sent: Friday, June 12, 2009 9:34 AM
> To: NT System Admin Issues
> Su
Do you have any hardware-level errors on these machines? Low RAID cache
batteries, degraded raids, etc?
-sc
> -Original Message-
> From: Steve Kelsay [mailto:kels...@sctax.org]
> Sent: Friday, June 12, 2009 9:34 AM
> To: NT System Admin Issues
> Subject: Press F1 to
After rolling out the MS updates last night, I had three different models of
servers that failed to restart, having the "Press F1 to Continue" message.
Pressing it let it start properly, but I had to drive in and attach a keyboard
to the front of the box to do it.
Is this a coincidence, or has
10 matches
Mail list logo