Do you have any hardware-level errors on these machines? Low RAID cache
batteries, degraded raids, etc?
-sc
-Original Message-
From: Steve Kelsay [mailto:kels...@sctax.org]
Sent: Friday, June 12, 2009 9:34 AM
To: NT System Admin Issues
Subject: Press F1 to continue after updates.
, but rebooted fine
two weeks ago when we did the last updates.
Nothing critical, but I was wondering if someone else had the same issue.
-Original Message-
From: Steven M. Caesare [mailto:scaes...@caesare.com]
Sent: Friday, June 12, 2009 9:32 AM
To: NT System Admin Issues
Subject: RE: Press F1
Admin Issues
Subject: RE: Press F1 to continue after updates.
Do you have any hardware-level errors on these machines? Low RAID cache
batteries, degraded raids, etc?
-sc
-Original Message-
From: Steve Kelsay [mailto:kels...@sctax.org]
Sent: Friday, June 12, 2009 9:34 AM
To: NT System
Admin Issues
Subject: RE: Press F1 to continue after updates.
No, Nothing that was not there before the update. Two were 1 year old
Dell R900s, which had completed a health check by Dell earlier in the
day, and rebooted fine then so it only started right after the updates
on those two machines
DRAC rules - saves getting up and moving to access to the console
2009/6/12 Steve Kelsay kels...@sctax.org
After rolling out the MS updates last night, I had three different models
of servers that failed to restart, having the Press F1 to Continue
message. Pressing it let it start properly,
Remote Insight Lights Out too ! ( HP/Compaq )
Erik Goldoff
IT Consultant
Systems, Networks, Security
_
From: James Rankin [mailto:kz2...@googlemail.com]
Sent: Friday, June 12, 2009 10:02 AM
To: NT System Admin Issues
Subject: Re: Press F1 to continue after updates.
DRAC
Are you getting a System FRU not programmed message? Or an ESM error on POST?
If so, shutdown the server and unplug the power cords. Wait a few minutes.
Hold in the power button for a minute. Plug power cords back in and power on.
Error should go away F1 prompt to continue should no longer
Admin Issues ntsysadmin@lyris.sunbelt-software.com
cc
Subject
RE: Press F1 to continue after updates.
Are you getting a System FRU not programmed message? Or an ESM error on
POST?
If so, shutdown the server and unplug the power cords. Wait a few
minutes. Hold in the power button
The OMSA did not show any log messages.
-Original Message-
From: Scott Kaufman at HQ [mailto:skauf...@ittesi.com]
Sent: Friday, June 12, 2009 10:55 AM
To: NT System Admin Issues
Subject: RE: Press F1 to continue after updates.
Are you getting a System FRU not programmed message
