Working to get NUT setup in XCP NG v8 dom0
Everything is working except my UPS won't power down after the system shuts
down. I've tried two different shutdown scripts in my init shutdown and neither
seems to be working.
cat /etc/ups/upsmon.conf
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h +0"
NO
Wow, I feel famous
I needed to whitelist the IP of my XCP NG host in the APC UPS for SNMP access
to work.
-Original Message-
From: Manuel Wolfshant
Sent: Saturday, December 4, 2021 2:55 PM
To: Ken Brubacher ; Jim Klimov
Cc: Arnaud Quette via Nut-upsuser
Subject: Re: [Nut-upsuser
UPS01
0.000660 1 remaining attempts
0.000705 exec: /usr/sbin/snmp-ups -a MILLRACKUPS01
Network UPS Tools - Generic SNMP UPS driver 0.97 (2.7.4)
Unknown mibs value: apcc
6.041714 Driver failed to start (exit status=1)
-Original Message-----
From: Manuel Wolfshant
Klimov
Sent: Saturday, December 4, 2021 10:32 AM
To: Ken Brubacher
Cc: Arnaud Quette via Nut-upsuser
Subject: Re: [Nut-upsuser] install SNMP APC SMART UPS 2000 in XCP-NG dom0
Given how driver says it has version 2.7.2, I have doubts about it being the
"latest version" (latest offici
A few days ago I configured Network UPS Tools in a Ubuntu VM on a XCP-NG VM.
The driver installed flawlessly, and I was able to scan and find the UPS using
nut-scanner -S -s 192.168.0.1 -e 192.168.0.254
It returned the UPS configuration below from the network, and I configured
ups.conf without
I have a basic NUT server / client configuration setup and working.
Is it possible to issue a SHUTDOWNCMD command from a slave or only from a
master?
The scenario is a Dell R740 hypervisor, and I'd like NUT server to run as a
virtual machine on it, and shut down the host from the virtual machine