On Tue, 10 Sep 2019, Charles Lepple wrote:
On Sep 10, 2019, at 10:40 AM, gru...@mailfence.com wrote:
i have a OMNIVS1500XL
i have used nut for several years on a full sized pc with no problems
i am trying to get nut working with this ups on a raspberry pi
i tried with a pi 3b running raspbian
i have a OMNIVS1500XL
i have used nut for several years on a full sized pc with no problems
i am trying to get nut working with this ups on a raspberry pi
i tried with a pi 3b running raspbian stretch
i tried with a pi 3b running raspbian buster
i tried plugging the usb cable straight into the pi
this probably has no relevance to the subject but i have run a OMNIVS1500XL
with the tripplite_usb driver for several years with no problem
i am using a a powered usb hub if that make any difference
___
Nut-upsuser mailing list
Nut-upsuser@alioth-lists
On Tue, 28 May 2019, nicolae788 wrote:
Apc uses a propietary serial cable and your convertar for sure it's wired
standard. Refer to the following link for info.
https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml
Good luck
On Tue, 28 May 2019, 15:13 , wrote:
a friend gave me an old apc
On Tue, 28 May 2019, nicolae788 wrote:
Apc uses a propietary serial cable and your convertar for sure it's wired
standard. Refer to the following link for info.
https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml
Good luck
On Tue, 28 May 2019, 15:13 , wrote:
a friend gave me an old apc
a friend gave me an old apc smart-ups 1250
it has a rs232 interface but i have no pc with a rs232 port
i attempted to use a rs232 to usb adapter but the ups goes nuts
i connected the ups to batteries and verified it was working properly
when i plug the usb cable into the pc the ups shuts down
when