Really? Silly me then; Megatec looked like a fairly evolved protocol so I
was afraid that, since no RTS/CTS signaling was in place into the
manufacturer supplied cable, maybe plain RX/TX/GND won't do. For example
Minicom showed Offline all the time during the tests.
Most (if not all) smart
2.0.3 is biting me bad in the upssched department so I
guess I'll have
to go for SVN. :-(
Like how? There have not been too many major bugs in upssched
and as far as I know this has not changed significantly (if
at all) since nut-2.0.3.
Could you please describe what is not
... Of course the line:
AT ONBATT [EMAIL PROTECTED] START-TIMER onbattwarn 60 AT
ONLINE [EMAIL PROTECTED] CANCEL-TIMER onbattwarn
Should read:
AT ONBATT [EMAIL PROTECTED] START-TIMER onbattwarn 60
AT ONLINE [EMAIL PROTECTED] CANCEL-TIMER onbattwarn
So the mistake is not there.
Another
Dear all,
I am having trouble with
MGE Pulsar Evolution 800 Tower UPS.
I use this UPS on several computers under RH9.0 O/S -- and the effect
is the same.
Each computer has two UPS connected: one on ttyS0 (MGE) and the other
on ttyS1 (generic). One UPS is MGE, the other one is usually some
hi
i have a belkin ups
here some setting
chmod 0600 /dev/hiddev0
chown nut:root /dev/hiddev0
linux:/home/sonia # /usr/lib/ups/driver/upsdrvctl start
Network UPS Tools - UPS driver controller 2.0.4
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4)
No matching USB/HID UPS found
Driver
Hi Marc,
the answer to your question is contained in the file INSTALL,
distributed with NUT, section 6 Set ownership data and permissions on
your serial or USB ports that go to your UPS hardware.
Quote:
The setup for USB ports is slightly more complicated. Device
files for USB devices,
6 matches
Mail list logo
