Re: [Nut-upsuser] USB trouble / nut 2.2.1 / MGE Protection Center 675

2008-04-08 Thread Arjen de Korte
Franck Hamelin wrote: > There is many (20 per day on average) messages like: > kernel: usb 2-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 > rq 1 len 2 ret -110 > usbhid-ups[6768]: HIDGetDataValue: Connection timed out > > What can be done do correct that problem? This is a message t

[Nut-upsuser] USB trouble / nut 2.2.1 / MGE Protection Center 675

2008-04-08 Thread Franck Hamelin
Hi, There is many (20 per day on average) messages like: kernel: usb 2-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 2 ret -110 usbhid-ups[6768]: HIDGetDataValue: Connection timed out What can be done do correct that problem? best regards, Franck my configuration: debian e

Re: [Nut-upsuser] Network UPS Tools version 2.2.2-pre1 released

2008-04-08 Thread Jean Delvare
On Tue, 8 Apr 2008 11:23:33 +0200, Arnaud Quette wrote: > 2008/4/4, Jean Delvare <[EMAIL PROTECTED]>: > > * battery.temperature changed from 28 degrees C to 29.2 degrees C. Note > > that I am a bit skeptical about the reported value though, as it > > basically never changed since I installed t

Re: [Nut-upsuser] Fwd: Cyberpower usbhid-ups wrong battery voltage

2008-04-08 Thread davor emard
I guess it's tied to vendor/product id probably all models e.g. 400/600/800 differ only in battery capacity and run the same firmware but I will ask them On 4/8/08, Arjen de Korte <[EMAIL PROTECTED]> wrote: > > I just got reply from Cyberpower R&D department about the battery > > voltage correctio

Re: [Nut-upsuser] Network UPS Tools version 2.2.2-pre1 released

2008-04-08 Thread Arnaud Quette
Bonjour Jean, 2008/4/4, Jean Delvare <[EMAIL PROTECTED]>: > Salut Arnaud, > > > On Wed, 2 Apr 2008 16:31:36 +0200, Arnaud Quette wrote: > > Network UPS Tools version 2.2.2-pre1 has been released. > > > > http://www.networkupstools.org/ > > > > Direct access: > > - Download: > http://www.n

Re: [Nut-upsuser] Fwd: Cyberpower usbhid-ups wrong battery voltage

2008-04-08 Thread Arjen de Korte
> I just got reply from Cyberpower R&D department about the battery > voltage correction formulae > >> responsibility of the vendor (CyberPower). If someone provides me with >> the >> correct conversion values, I'm willing to include this in the subdriver. > > Our software group provided the follo

Re: [Nut-upsuser] Fwd: Cyberpower usbhid-ups wrong battery voltage

2008-04-08 Thread davor emard
HI I just got reply from Cyberpower R&D department about the battery voltage correction formulae > responsibility of the vendor (CyberPower). If someone provides me with the > correct conversion values, I'm willing to include this in the subdriver. Our software group provided the following Ba