Re: [Nut-upsuser] NUT Client shuts down when performing runtime calibration on APC UPS

On Jan 9, 2017, at 9:46 AM, Merk - Oliver wrote: > > I then connected to my QNAP and set the UPS settings on the web interface to > "Shutdown server if power loss is 5 min", the UPS is configured to an > SNMP-Connection with its IP-address. Started runtime calibration and after > 5min. the QN

Re: [Nut-upsuser] NUT Client shuts down when performing runtime calibration on APC UPS

Here are the results from the output of upsc under different conditions from my Debian Test system with NUT 2.7.2 : Normal: ups.status: OL No wall power: ups.status: OB Runtime calibration (started from AP9630 web interface): ups.status: OB CAL So at this stage there is a difference! I then co

Re: [Nut-upsuser] NUT Client shuts down when performing runtime calibration on APC UPS

Thanks for your reply. Sorry for the delay, but until yet I haven't had a subscription, so I haven't seen your answer. I can test this, I have three APC USVs, each equipped with the AP9630 network card. I need to setup a Linux test VM with NUT first. I will give the feedback as soon as I can.