I'm running FreeBSD 6.1 amd64 with NUT 2.0.3 installed from ports and my problem is that I can't seem to get any data out of the UPS.
When starting upsd I get this: Network UPS Tools - UPS driver controller 2.0.3 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.87 (2.0.3) Could not get multiplier table: using raw readings. .Detected Si on /dev/cuad0 updateinfo: Cannot update system status Starting nut. Network UPS Tools upsd 2.0.3 Connected to UPS [ups]: mge-utalk-cuad0 Synchronizing........ giving up and my message log is filled with:Jun 29 13:14:12 zeus mge-utalk[78111]: updateinfo: Cannot update system status
Jun 29 13:14:12 zeus upsd[78121]: Data for UPS [ups] is stale - check driver Jun 29 13:14:13 zeus upsd[78121]: UPS [ups] data is no longer staleJun 29 13:14:23 zeus mge-utalk[78111]: updateinfo: Cannot update system status
Jun 29 13:14:23 zeus upsd[78121]: Data for UPS [ups] is stale - check driver Jun 29 13:14:23 zeus upsd[78121]: UPS [ups] data is no longer stale I'm able to run upsc but I get no data out of the ups: battery.charge: 000.0 battery.charge.low: 00 battery.runtime: 00000 battery.voltage: 000.0 battery.voltage.nominal: 000.0 driver.name: mge-utalk driver.parameter.port: /dev/cuad0 driver.version: 2.0.3 driver.version.internal: 0.87 input.frequency: 00.00 input.transfer.boost.high: 000.0 input.transfer.boost.low: 000.0 input.transfer.high: 000.0 input.transfer.low: 000.0 input.transfer.trim.high: 000.0 input.transfer.trim.low: 000.0 input.voltage: 000.0 output.current: 000.0 output.voltage: 000.0 ups.delay.shutdown: 000 ups.delay.start: 000 ups.firmware: 1 ups.id: Si 1 ups.load: 000.0 ups.mfr: MGE UPS SYSTEMS ups.model: Si ups.status: ups.temperature: 000.0 ups.test.interval: 000 This is what my conf files looks like.. ups.conf: [ups] driver = mge-utalk port = /dev/cuad0 desc = "MGE Pulsar ESV 8+" upsd.conf: ACL all 0.0.0.0/0 ACL localhost 127.0.0.1/32 ACL localnet 192.168.1.0/24 ACCEPT localhost ACCEPT localnet REJECT allAny ideas what I can do to get this to work? MGE ESV8+ should be supported, right? My ESV8 worked just fine. I'm glad for all help I can get.
-- Daniel Johansson - <[EMAIL PROTECTED]>
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser