I had a similar problem with Ubuntu 6.10. There was a problem during
system shutdown and the whole script was not executed. I went back to
Ubuntu 6.6 and the problem went away. Check your syslog for a problem
with one of the nut programs shutting down. It was happening on any
shutdown not jus
file before I shutdown. Anyone know what might cause this
problem? I also am having a problem getting the computer to restart when
power is restored. The computer restarts if I turn the ups off and wait
a while then turn the ups back on.
Gary Redden wrote:
I think I still have a problem with the
As for SMP, I don't have a way to test this here, but if you boot with
an i386 kernel, it should disable SMP.
On 2/19/07, Gary Redden <[EMAIL PROTECTED]> wrote:
I do not have enough knowledge of Linux to answer those questions. I am
running Ubuntu desktop the GUI version so I must be run
to be pointed in the right direction. I have another project
that needs most my attention for the next week(spec. for a fire truck
for my volunteer fire department) but will work on this in my spare time.
Charles Lepple wrote:
On 2/19/07, Gary Redden <[EMAIL PROTECTED]> wrote:
>>
which will drop you to a shell at the right
moment in the shutdown sequence. You can then experiment and see what
you need to call to shutdown the system.
-- Peter
Gary Redden wrote:
I have attached a section of my syslog. It seems to say that newhidups
had a problem on the shutdown part of a
I have attached a section of my syslog. It seems to say that newhidups
had a problem on the shutdown part of a restart. But before that upsd is
still running after newhidups has exited. This might be causing the
paging error. My script tries to shut down upsd before it runs upsdrvctl
stop. Am I
ff the UPS (which
turns off your computer).
The reason it's not working is probably that you forgot a "/" in front
of /usr/local/ups/etc/upsmon.conf. You should also make sure that is
the correct location of your upsmon.conf.
-- Peter
Gary Redden wrote:
I am still not
I am still not able to get the UPS to shutdown. Here is a list of rc0.d
and the file I created to shutdown the UPS after umountroot mounts the
filesystem read-only and before halt (halt seems to be a no op here. No
code under the start case).
[EMAIL PROTECTED]:~$ cd /etc/rc0.d
[EMAIL PROTECTE
, item 11
"Edit your shutdown scripts: add upsdrvctl shutdown".
-- Peter
Gary Redden wrote:
Nut will monitor the ups and shutdown Linux when the ups goes to low
battery as it should. But the UPS is not shut down so the system will
restart when the power is restored. If I switch the UPS o
I am using nut 2.0.5 driver newhidups
Doug Reynolds wrote:
Gary Redden wrote:
Nut will monitor the ups and shutdown Linux when the ups goes to low
battery as it should. But the UPS is not shut down so the system will
restart when the power is restored. If I switch the UPS off , restore
power
Nut will monitor the ups and shutdown Linux when the ups goes to low
battery as it should. But the UPS is not shut down so the system will
restart when the power is restored. If I switch the UPS off , restore
power and switch the UPS on the system will restart. I have not been
able to get nut t
This took a long time because I had problems with my system. After I
reloaded my operating system several times I found I had a bad memory
module.
Here is the output from newhidups for my Geek Squad GS1285U. It just
kept repeating until I hit ctl-z. I think that this means nut will work
for thi
(or type "libusb" into Google).
-- Peter
Gary Redden wrote:
When I try to build newhidups I seem to be missing a file (usb.h) or=20
should be setting a parameter SHUT_MODE. I did a search of my system and=20
do not have the file usb.h. I also poked around on WebSvn but could not=2
When I try to build newhidups I seem to be missing a file (usb.h) or
should be setting a parameter SHUT_MODE. I did a search of my system and
do not have the file usb.h. I also poked around on WebSvn but could not
turn up the file. I think SHUT_MODE is for a different device than I
have. Where
I Seem to have made some progress in getting nut-2.0.5 installed, but
hidups still has a version number of 0.13. First is hidups 0.13 the
correct version? if not how do I find the correct version. Second if my
Geek Squad GS1285U UPS is not supported how do I proceed. I have been a
programmer fo
I downloaded nut-2.0.5 and followed the install instructions down to
step 6. Since I will be using a USB port to connect to the Geek Squad GS
1285U did not go any farther yet. I tried to run "/lib/nut/hidups -DD -u
root auto" to see if it found my UPS. But it is still the old hidups
0.13 from n
16 matches
Mail list logo
