hi
my girldfriend have a belkin ups and get often this message
USBDEVFS_CONTROL failed cmd newhidups rqt 161 rq 1 len 8 ret -71
ups.conf
[myups]
driver = newhidups
port = /dev/hiddev0
desc = "Local UPS"
any idea?
thanks
--
Marc Collin ing. jr
www.laboit
Le vendredi 29 décembre 2006 16:35, vous avez écrit :
> Marc Collin wrote:
> > i think nut close the computer when the battery is low...
> > is there a way to close it after a few time is electricity is off?
>
> This is in the FAQ (docs/FAQ):
>
it's only to be sure
hi
i think nut close the computer when the battery is low...
is there a way to close it after a few time is electricity is off?
thanks
___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-
>
> Good! This will work fine, if you don't mind running the driver as
> "root".
>
> If you would like to run the driver without "-u root" (as I assumed
> you wanted to do from your previous message), then the above
> instructions might still help.
>
> If you have any further questions, please fee
hi
i have a belkin ups
here some setting
chmod 0600 /dev/hiddev0
chown nut:root /dev/hiddev0
linux:/home/sonia # /usr/lib/ups/driver/upsdrvctl start
Network UPS Tools - UPS driver controller 2.0.4
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4)
No matching USB/HID UPS found
Driver faile
Le vendredi 8 septembre 2006 15:35, Peter Selinger a écrit :
> Charles Lepple wrote:
> > On 9/8/06, Hans Fugal <[EMAIL PROTECTED]> wrote:
> > > I have a Tripp Lite OMNI900LCD.
> > > ...
> > > I can't get newhidups to recognize it at all.
> >
> > Support for newer Tripp-Lite USB/HID models is still
Le dimanche 27 ao=3DFBt 2006 12:38, Peter Selinger a =3DE9crit=3DA0:
>
> Yes, that's actually useful. It shows that the Windows driver
> exclusively uses interrupt transfers, something that newhidups is not
> yet very good at. Decoding the transmitted values by hand, I get the
> following. The val
Le samedi 26 août 2006 19:45, Peter Selinger a écrit :
> Marc Collin wrote:
> > linux64:/home/collinm/Download/trunk # /usr/local/ups/bin/upsc
> > [EMAIL PROTECTED] driver.name: newhidups
> > driver.parameter.port: /dev/hiddev0
> > driver.version: 2.1.0
> > driv
Le samedi 26 août 2006 09:13, Peter Selinger a écrit :
> You did "make install", right? (Else upsdrvctl might be trying to
> start an older version of the driver).
./configure --with-user=ups
make
make usb
make install
make install-usb
mkdir -p /var/state/ups
chmod 0700 /var/state/ups
chown nut
Le vendredi 25 août 2006 23:34, Peter Selinger a écrit :
>
> As mentioned before, you should not use the "powercom" driver. It is
> for serial.
>
> You should use "newhidups". -- Peter
ok
changed for
[myups]
driver = newhidups
port = /dev/hiddev0
desc = "Ultra ULT31502"
> P
Le vendredi 25 août 2006 18:17, vous avez écrit :
> Dear Marc,
>
> first, the 'powercom' driver is a serial driver, so it will not work
> for USB.
>
> Second, newhidups does not currently support Powercom. The reason is
> simple: this is (as far as I remember) the first time we are seeing a
> Power
hi
i bought a ultra ULT31502 ups
someone seem able to run this ups with nut
just see Dean thread on:
http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=770423&Tab=11&NoMapp=0
i use suse 10.1, i installed nut
the ups is connected directely to my computer with an usb cabl
12 matches
Mail list logo