DAMN.
I swapped '2' and '3'.
2008, 2308, 3008 ==> mpt_sas
2108, 2208, 3108 ==> mr_sas
Sorry about that folks!
Dan
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
On 01/24/2017 02:22 AM, Dan McDonald wrote:
On Jan 23, 2017, at 8:17 PM, Michael Rasmussen wrote:
I am aware of that and an upgrade to a 2x08 is on the todo list.
Highly recommend x == 0 or 2, or also consider a 3008. All of these are
mpt_sas boards. x == 1 or 3 are mr_sas boards, whic
On Tue, 24 Jan 2017, Matej Žerovnik wrote:
I’m running LSI 9300-8e for the last 6 months in producution without
problems. I have Supermicro JBOD attached to it with SAS drives in
it. So, 12Gb/s controller and drives and 6Gb/s backplace.
Perhaps SuperMicro is not eager to re-qualify their exis
I’m running LSI 9300-8e for the last 6 months in producution without problems.
I have Supermicro JBOD attached to it with SAS drives in it. So, 12Gb/s
controller and drives and 6Gb/s backplace.
lp, Matej
> On 24 Jan 2017, at 15:50, Bob Friesenhahn
> wrote:
>
> On Tue, 24 Jan 2017, Svavar Ör
On Tue, 24 Jan 2017, Svavar Örn Eysteinsson wrote:
Which 16port internal controller would you guys recommend ?
I'm totall lost in the catalog at LSI site...
I have a LSI 9300-16i 12Gb/s SAS controller which seems to be working
fine here. I am still burn-in testing but it has been 3 days alre
Which 16port internal controller would you guys recommend ?
I'm totall lost in the catalog at LSI site...
Thanks allot.
Svavar
> On 24 Jan 2017, at 01:22, Dan McDonald wrote:
>
>
>> On Jan 23, 2017, at 8:17 PM, Michael Rasmussen wrote:
>>
>> I am aware of that and an upgrade to a 2x08 is
> On Jan 23, 2017, at 5:17 PM, Michael Rasmussen wrote:
>
> On Mon, 23 Jan 2017 19:27:51 -0500
> Dale Ghent wrote:
>
>>
>> Check your BIOS settings for the slots, they might be limited there. I also
>> note that this motherboard model has two physical x8 PCIe slots but one of
>> them is wir
> On Jan 23, 2017, at 8:17 PM, Michael Rasmussen wrote:
>
> I am aware of that and an upgrade to a 2x08 is on the todo list.
Highly recommend x == 0 or 2, or also consider a 3008. All of these are
mpt_sas boards. x == 1 or 3 are mr_sas boards, which have (eww) HW-RAID on
them.
Dan
___
On Mon, 23 Jan 2017 19:27:51 -0500
Dale Ghent wrote:
>
> Check your BIOS settings for the slots, they might be limited there. I also
> note that this motherboard model has two physical x8 PCIe slots but one of
> them is wired for 4 lanes only. Is your card in that slot? Something not
> linkin
> On Jan 23, 2017, at 5:13 PM, Michael Rasmussen wrote:
>
> Hi all,
>
> I have a problem with a LSI 1068E HBA which supposedly should be
> capable of exhausting all 8 lanes in a x8 slot but it seems not to use
> more than 4 lanes:
>
> 06:00.0 SCSI storage controller: LSI Logic / Symbios Logic
Hi all,
I have a problem with a LSI 1068E HBA which supposedly should be
capable of exhausting all 8 lanes in a x8 slot but it seems not to use
more than 4 lanes:
06:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express
Fusion-MPT SAS (rev 08)
LnkCap: Port
11 matches
Mail list logo