' with regards to the issue, though!
Thanks,
-Goncalo.
-Original Message-
From: Hannes Reinecke [mailto:h...@suse.de]
Sent: 30 August 2010 15:12
To: Goncalo Gomes
Cc: Mike Christie; open-iscsi@googlegroups.com; Shantanu Mehendale
Subject: Re: detected conn error (1011)
Goncalo Gomes wrote
Thanks Hannes and Mike,
Your help has been highly appreciated!
Cheers,
-Goncalo.
-Original Message-
From: Hannes Reinecke [mailto:h...@suse.de]
Sent: 31 August 2010 14:43
To: Goncalo Gomes
Cc: Mike Christie; open-iscsi@googlegroups.com; Shantanu Mehendale
Subject: Re: detected conn
storage for these VMs
is iSCSI based via open-iscsi 2.0.870-26.6.1 and a DELL equallogic array.
On 08/05/2010 02:21 PM, Goncalo Gomes wrote:
I've copied both the messages file from the host goncalog140 and the
patched libiscsi.c. FWIW, I've also included the iscsid.conf. Find
tree of SLES. Also, for this
specific controller we don't enable MPIO, but in most other arrays we do.
Thanks,
-Goncalo.
-Original Message-
From: Hannes Reinecke [mailto:h...@suse.de]
Sent: 06 August 2010 15:58
To: Mike Christie
Cc: open-iscsi@googlegroups.com; Goncalo Gomes
Subject
On Wed, 2010-08-04 at 21:51 -0500, Mike Christie wrote:
conn error 1011 is generic. If this is occurring when the eql box is
rebalancing luns, it is a little different than above. With the above
problem we did not know why we got the error. With your situation we
sort of expect this. We
I'm running a setup composed of: Linux 2.6.27 x86 based on SLES + Xen 3.4 (as
dom0) running a couple of RHEL 5.5 VMs. The underlying storage for these VMs is
iSCSI based via open-iscsi 2.0.870-26.6.1 and a DELL equallogic array.
Whenever the equallogic rebalances the LUNs between the