On 03/26/2012 03:32 AM, Rene wrote:
> Mike Christie writes:
>> I think you need to rescan the devices at the scsi layer level (like
>> doing a echo 1 > /sys/block/sdX/device/rescan) then run some multipath
>> to command, then run some FS and LVM commands if needed.
>
> Hi,
> I'm having a simil
Mike Christie writes:
> I think you need to rescan the devices at the scsi layer level (like
> doing a echo 1 > /sys/block/sdX/device/rescan) then run some multipath
> to command, then run some FS and LVM commands if needed.
Hi,
I'm having a similar problem and stumbled over this thread. For m
On 05/12/2011 01:30 AM, Ulrich Windl wrote:
Hi!
This is not an exact open-iscsi question, but tighlty related:
On a SAN using FibreChannel I had a 4-way multipath device. The basic
configuration (without aliases for devices) is:
devices {
device {
vendor "HP"
Hi!
This is not an exact open-iscsi question, but tighlty related:
On a SAN using FibreChannel I had a 4-way multipath device. The basic
configuration (without aliases for devices) is:
devices {
device {
vendor "HP"
product "HSV2.*"
path_gro
