I'm having the same problem with the kernel that Redhat posted "kernel-smp-2.6.9-22.14.EL.OpenIB_3965.3.i686.rpm"
from: http://people.redhat.com/dledford/Infiniband/RHEL-4/kernel/2.6.9-22.14.EL.OpenIB_3965.3/i686/ Again, I know that the card is functional. Ranjit On 1/5/06, Ranjit Pandit <[EMAIL PROTECTED]> wrote: > Has anybody seen this problem before? > > modprobe ib_mthca > > ib_mthca: Mellanox InfiniBand HCA driver v0.06 (June 23, 2005) > ib_mthca: Initializing 0000:03:00.0 > ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 24 (level, low) -> IRQ 233 > ib_mthca 0000:03:00.0: PCI device did not come back after reset, aborting. > ib_mthca 0000:03:00.0: Failed to reset HCA, aborting. > > I'm using 'infiniband-backport-svn4507-to-2.6.9' on RHEL 4 U2 kernel > (2.6.9-22.EL). > > To confirm that the HCA wasn't bad, I tried to bring up SilverStorm > stack and that came up fine - port goes Active etc... > > Here is what lspci shows before and after "modprobe ib_mthca" > > Before: > 02:06.0 PCI bridge: Mellanox Technologies MT23108 PCI Bridge (rev a1) > 03:00.0 InfiniBand: Mellanox Technologies MT23108 InfiniHost (rev a1) > > After: > 02:06.0 PCI bridge: Mellanox Technologies MT23108 PCI Bridge (rev ff) > > ^^^^^ > 03:00.0 InfiniBand: Mellanox Technologies MT23108 InfiniHost (rev ff) > > > I presume that is because of the problem during reset. > > Any ideas why it's having problems resetting the card? > > thanks, > > Ranjit > _______________________________________________ openib-general mailing list openib-general@openib.org http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general