On Wed, 2006-07-12 at 09:13, yipeeyipee yipeeyipee wrote:
> --- Hal Rosenstock <[EMAIL PROTECTED]> wrote:
>
> [snip]
> Should this IS_SM bit in port attributes be supported
> in the switch hardware?
If you are running an SM on your switch, the IS_SM bit would be on for
port 0. Otherwise not.
> >
--- Hal Rosenstock <[EMAIL PROTECTED]> wrote:
[snip]
Should this IS_SM bit in port attributes be supported
in the switch hardware?
> Yes (I'm pretty sure). The user_mad API has not
> changed in quite some
> time now. What ABI version is 2.6.14 ?
I don't know where to check this.
_
On Tue, 2006-07-11 at 09:27, yipee wrote:
> Hal Rosenstock voltaire.com> writes:
> [snip]
> > It's not the setting which is failing. You are likely not using an SM
> > which supports this (it is an enhanced capability defined in a 1.2
> > erratum). Are you running a recent OpenSM or something els
Hal Rosenstock voltaire.com> writes:
[snip]
> It's not the setting which is failing. You are likely not using an SM
> which supports this (it is an enhanced capability defined in a 1.2
> erratum). Are you running a recent OpenSM or something else ?
>
I'm running a 1.1 openSM on a 2.6.14 kernel.
On Tue, 2006-07-11 at 03:24, yipee wrote:
> Hi,
>
> On one of my IB setups I get the following error from openSM:
> osm_vendor_set_sm: ERR 5431: setting IS_SM capability mask failed; errno 2
>
> what's this IS_SM capability mask? what might cause its setting to fail?
It's not the setting which i
count on the IS_SM bit got crazy.
Hope this helps...
Eitan Zahavi
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:openib-general-
> [EMAIL PROTECTED] On Behalf Of yipee
> Sent: Tuesday, July 11, 2006 10:24 AM
> To: openib-general@openib.org
> Subject: [openib-gener
Hi,
On one of my IB setups I get the following error from openSM:
osm_vendor_set_sm: ERR 5431: setting IS_SM capability mask failed; errno 2
what's this IS_SM capability mask? what might cause its setting to fail?
Thanks,
y
___
openib-general maili