Hello David
If you want to move disks around with a controller port based detection,
you should not just move the disk but insert a new disk on a new
location followed by a disk replace for a bad disk.
You can replace a disk in the same port but should not insert the
removed disk in another
>The boot drive had uncorrectable errors but still not faulted. I put
>the mirrored drive into the boot drive position (c2t1d0s0 into slot of
>c2t0d0s0) and put a new drive in place of the drive that was moved into
>the boot position, then booted the machine and resilvered. However, the
Maybe the system did not detect that the fault is already cleared.
If you look in /var/adm/messages you will find the entries from fmadm with the
ID.
If
fmadm faulty
spits out messages concerning this device, you can clear the state with
fmadm acquit
or
fmadm repaired.
-Ursprüngliche
Hi
> I do a pkg update yesterday on my PC (OI native install). After reboot all is
> OK.
>
> I do the same on a VirtualBox (5.1.28) hosted under Windows Seven.
>
> After reboot lightdm won't start
>
> Both were 2017/04 OI with update about every month
you need to switch to vesa
see Release
I do a pkg update yesterday on my PC (OI native install). After reboot all is
OK.
I do the same on a VirtualBox (5.1.28) hosted under Windows Seven.
After reboot lightdm won't start
Both were 2017/04 OI with update about every month
Here is the errlog of the lightdm service
**
Thank you, Andreas. I tried:
zpool clear syspool
zpool status -x
..but nothing changed. I also scrubbed it without effect.
Regards,
David
On 11/01/2017 02:59 AM, Grüninger, Andreas (LGL Extern) wrote:
Use
zpool clear syspool
zpool status -x
Andreas
-Ursprüngliche Nachricht-
Von:
Use
zpool clear syspool
zpool status -x
Andreas
-Ursprüngliche Nachricht-
Von: David Koski [mailto:da...@kosmosisland.com]
Gesendet: Mittwoch, 1. November 2017 07:28
An: openindiana-discuss@openindiana.org
Betreff: [OpenIndiana-discuss] Duplicate devices in zpool, degraded
The boot
The boot drive had uncorrectable errors but still not faulted. I put
the mirrored drive into the boot drive position (c2t1d0s0 into slot of
c2t0d0s0) and put a new drive in place of the drive that was moved into
the boot position, then booted the machine and resilvered. However, the
boot
On Tue, Oct 31, 2017 at 02:54:28PM +0300, Alexander Pyhalov wrote:
> Release notes: http://wiki.openindiana.org/oi/2017.04+Release+notes
The correct link is, obviously:
https://wiki.openindiana.org/oi/2017.10+Release+notes
--
+---+
| Marcel Telka
