I used the RES2SV240 card in OI for a while with no issues. It is a standard
LSI based LSISAS2x expander chip. Use it now in FreeNAS and the 9211-8i card
functions fine with SATA drives. I currently have 20 SATA drives connected to
it with no issues while running IT firmware and ZFS.
I have
How does a 5 drive bay work over sas? Does it have an internal expander for
the 5th drive??
--
David Scharbach
Mine Senior Electrical Engineer
PCS Cory Division
> On Jan 3, 2014, at 11:53 AM, Saso Kiselkov wrote:
>
>> On 1/3/14, 5:52 PM, Roman Na
age with 5 drives.
I may be paranoid but I would be careful using z1 with large drives as rebuilds
take long time. A second fail will kill you...
------
David Scharbach
Mine Senior Electrical Engineer
PCS Cory Division
> On Jan 3, 2014, at 9:19 AM, Saso Kiselkov wrot
hot-swap is the bomb, so make sure you get that because having to shut down
to replace a drive is not cool (I have not shut off my server in a long time,
even with the drive failures).
Cheers,
On Jan 2, 2014, at 5:21 PM, Roman Naumenko wrote:
> David Scharbach said the following, on 02-01
Supermicro may bit a bit overkill for the home server :) Although I have
considered it for myself at home… We used them where I used to work and they
are pretty nice for the money.
For myself, I opted to go with the Norco 4220, a Tyan MB with an integral
LSI-2008 based HBA, LSI based intel SA
I forgot to mention I use snapshots on both arrays. My bad.
--
David Scharbach
Mine Senior Electrical Engineer
PCS Cory Division
On 2013-08-03, at 2:45 PM, Martin Frost wrote:
> David, your advice to back up data regularly is good, but rsync'ing
&g
I use Raid-Z2 for my main array. 6 disks would give you effectively 4 disks
usable with the ability to tolerate ANY 2 disk failures. Mirroring would allow
for 3 disk failures ONLY if the failures were in different sets, if I
understand mirroring correctly. There is a risk that the right 2 fai
s are
> very interested in any problems with the CIFS service (which has
> crashed here).
>
> Thanks,
> -Albert
>
> On Sat, Jan 19, 2013 at 5:28 PM, David Scharbach
> wrote:
>> English is good.
>>
>> $ fmdump -m
>> SUNW-MSG-ID: SUNOS-8000-KL, TYPE: Defect
severity = Major
__ttl = 0x1
__tod = 0x50f8ae9c 0x36cc2af0
And as I am a n00b to OI, I still don't really know what is going on…
Thanks you again,
Dave
On 2013-01-19, at 4:15 PM, David Scharbach wrote:
> $ fmdump
> TIME UUID S
$ fmdump
TIME UUID SUNW-MSG-ID EVENT
Jan 17 20:08:28.9193 809adc23-290c-c3bb-bcde-c3d4c5c1ebe6 SUNOS-8000-KL
Diagnosed
$ uptime
16:12pm up 1 day 20:04, 2 users, load average: 0.08, 0.14, 0.21
Given today is the 19th and such, I think that timest
lol, you make it seem so easy :)
I just disabled the on board NIC. We will see. Next I will try the storage
controller. Then a hammer.
Cheers,
On 2013-01-16, at 9:01 AM, "Edward Ned Harvey (openindiana)"
wrote:
>> From: David Scharbach [mailto:david.scharb...@mac.com]
>
I checked and the P8V77-v that I am using seems to be listed, unless the LK
suffix makes a big difference.
I just disabled my on-board NIC and installed an Intel NIC. Shall see…
Thanks again,
On 2013-01-15, at 10:44 PM, Mehmet Erol Sanliturk
wrote:
> On Tue, Jan 15, 2013 at 6:50 PM, Da
wrote:
> David Scharbach wrote:
>> I have an OI installation that seems to crash about every 20 days. Locks up
>> completely and needs a hard reset. Not very much fun.
>>
>> Question I have is where would I start to look to see why? I first thought
>> it ma
I will make a memtest ISO ASAP. /var/adm/messages shows nothing. /var/crash
does not exist on my system.
Will see what memtest says.
Cheers,
Dave
On 2013-01-15, at 9:10 PM, Ian Collins wrote:
> David Scharbach wrote:
>> I have an OI installation that seems to crash about ever
I have an OI installation that seems to crash about every 20 days. Locks up
completely and needs a hard reset. Not very much fun.
Question I have is where would I start to look to see why? I first thought it
may be due to scrubbing load on the LSI controller but that is not the case.
It cra
15 matches
Mail list logo