On Mon, Oct 1, 2012 at 3:41 PM, Daniel Kjar dk...@elmira.edu wrote:
h mine is not even seeing the disks installed on the system
It should see your disks.
On my 2 SB2000's it sees them, too.
Just as on all other tested boxes ...
Does it help if you try devfsadm -v and then look
Did you get this to work?
On 09/28/12 01:15 PM, Andrej Javoršek wrote:
Hello,
I also have no issues to boot liveDVD on my headless SF210 (LOM). Also had
no issues to start net with DHCP and IPv6 autoconf., start ssh
But the question remains how to install it on disk?
I followed manuals
h mine is not even seeing the disks installed on the system
On 09/28/12 01:15 PM, Andrej Javoršek wrote:
Hello,
I also have no issues to boot liveDVD on my headless SF210 (LOM). Also had
no issues to start net with DHCP and IPv6 autoconf., start ssh
But the question remains
No I have not work on this during the weekend, but tomorrow I'll probably
try with basic installation of OpenSolaris 134 and try with creating new
BE!
Regards Andrej
P.S. I had no problems with seeing the disks...
On Mon, Oct 1, 2012 at 3:41 PM, Daniel Kjar dk...@elmira.edu wrote:
h
Let me know how it goes... I think I have disk problems
On 10/ 1/12 10:52 AM, Andrej Javoršek wrote:
No I have not work on this during the weekend, but tomorrow I'll probably
try with basic installation of OpenSolaris 134 and try with creating new
BE!
Regards Andrej
P.S. I had no
for OpenIndiana
openindiana-discuss@openindiana.org
Cc: Al Hopper a...@logical-approach.com
Sent: Thursday, September 27, 2012 12:44 PM
Subject: [OpenIndiana-discuss] Preliminary Download link: Illumos based
MartUX_OpenIndiana_Edition for SPARC LiveDVD (without installer)
Hi!
Here is a mail from Al Hopper
On Fri, Sep 28, 2012 at 2:25 PM, ken mays maybird1...@yahoo.com wrote:
I wrote up a basic wiki page here to make things a bit easier to find:
http://wiki.openindiana.org/oi/MartUX_OpenIndiana+oi_151a+SPARC+LiveDVD
~ Ken Mays
Man, Ken!
Thanks a lot!
That's well written, excellent.
Just as
, 2012 12:44 PM
Subject: [OpenIndiana-discuss] Preliminary Download link: Illumos based
MartUX_OpenIndiana_Edition for SPARC LiveDVD (without installer)
Hi!
Here is a mail from Al Hopper, well-known from genunix.org, who once
again arranged the hosting.
It is unbelievable how much effort
From: Martin Bochnig mar...@martux.org
To: develo...@lists.illumos.org; Discussion list for OpenIndiana
openindiana-discuss@openindiana.org
Cc: Al Hopper a...@logical-approach.com
Sent: Thursday, September 27, 2012 12:44 PM
Subject: [OpenIndiana-discuss] Preliminary Download link: Illumos based
] Preliminary Download link: Illumos based
MartUX_OpenIndiana_Edition for SPARC LiveDVD (without installer)
Hi!
Here is a mail from Al Hopper, well-known from genunix.org, who once
again arranged the hosting.
It is unbelievable how much effort and money he puts in supporting
community projects like
On Fri, Sep 28, 2012 at 4:05 PM, Alex Smith (K4RNT)
shadowhun...@gmail.com wrote:
I downloaded it yesterday - I *LOVE* working in a datacenter and being on
the backbone directly! I frequently hit 40Mbit download rates! Took less
than 10 minutes!
I will be installing it over the weekend on my
On Fri, Sep 28, 2012 at 4:45 PM, Daniel Kjar dk...@elmira.edu wrote:
h. When I do X11go.sh I get the usb keyboard selection hit enter
and then it pops back to #.
Gonna swap the xvr1200 for the 100 and see if that helps
Oh, I'm sorry :(
What's in /tmp/X*log
pls., what gives
On Fri, Sep 28, 2012 at 4:49 PM, Daniel Kjar dk...@elmira.edu wrote:
I also get this error after X11go.sh
3098 CRITICAL file dbus-groxy.c: line 2084 assertion 'DBUS_IS_G_PROXY
(proxy)' failed
it then goes to the USB keyboard selection. After selection back to prompt.
That's absolutely
My box has one fb. I am about to boot with the 100 and I will let you
know what happens and give you the data from those commands.
On 09/28/12 11:07 AM, Martin Bochnig wrote:
On Fri, Sep 28, 2012 at 4:49 PM, Daniel Kjar dk...@elmira.edu wrote:
I also get this error after X11go.sh
3098
in openXsun_session.log
The loadable module for the display device SUNWefb is not installed
Fatal server error:
InitOutput: Error loading module for /dev/fb
/usr/X11/bin/xinit: giving up
unable to connect to X server: Connection refused
server error
for the ls -l /dev/fb*
/dev/fb -
XVR 1200 is back in. Everytime I start X11go.sh the link I create for
/dev/fb (ln -s /dev/fb0 /dev/fb) gets blown away and I get the no
/dev/fb error in the openXsession log Anyway to keep it from
getting deleted? I see that X11go is calling
smfhack
kbd
and xsession
Which one is the
I went into xsession and pounded out the lines that deleted and set the
/dev/fb link, put it in by hand, and bang... I am booting into gnome as
I type. getting all kinds of errors saying RANDR is missing on display
:0 aborting metacity SUNW, blade1000 not compatible
Letting it go... we
It's alive
Took about 2 minutes to boot into gnome 'the first time' as Martin
says. This is a maxed out blade1000 2 1.2ghz IIIcu-C chips, 8gb ram,
xvr1200.
so Martin how do I install this on my drive rather than the livedvd?
On 09/28/12 11:07 AM, Martin Bochnig wrote:
On
I think my SB2500 has either an XVR-600 or XVR-1200, can't remember off the
top of my head. Will find out tomorrow when I work on the host for the
first time in a while! :)
On Fri, Sep 28, 2012 at 11:01 AM, Martin Bochnig mar...@martux.org wrote:
On Fri, Sep 28, 2012 at 4:05 PM, Alex Smith
Hello,
I also have no issues to boot liveDVD on my headless SF210 (LOM). Also had
no issues to start net with DHCP and IPv6 autoconf., start ssh
But the question remains how to install it on disk?
I followed manuals on Oracle howto create mirrored rpool...
-
On Fri, Sep 28, 2012 at 6:09 PM, Daniel Kjar dk...@elmira.edu wrote:
It's alive
Took about 2 minutes to boot into gnome 'the first time' as Martin says.
This is a maxed out blade1000 2 1.2ghz IIIcu-C chips, 8gb ram, xvr1200.
so Martin how do I install this on my drive rather than
So your design uses SVR4 pkgadd instead of IPS?
Sorry if it sounds like a stupid question, I really haven't used your
releases before and am not totally familiar with MartUX or how your system
works.
If I wanted to download the entirety of openindiana.org's package repos, how
would you
THANKS THANKS THANKS THANKS! You are the best Martin!
On 09/27/12 12:44 PM, Martin Bochnig wrote:
Hi!
Here is a mail from Al Hopper, well-known from genunix.org, who once
again arranged the hosting.
It is unbelievable how much effort and money he puts in supporting
community projects
Thank you very much!
I'll be trying it on the E250 and Ultra-5.
Amazing pictures, BTW ;)
Bryan
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
Glad you like this!
Thank you too, Professor Daniel.
For your interest.
I'm damn happy there are still some SPARC fellows who waited for this.
Thanks also for the restaurant invitation, only the 7 thousand
kilometers are a problem ...
If I'm ever in the region again, then ...
I just hope
2 hours left till download is finished!
On 09/27/12 12:55 PM, Martin Bochnig wrote:
Glad you like this!
Thank you too, Professor Daniel.
For your interest.
I'm damn happy there are still some SPARC fellows who waited for this.
Thanks also for the restaurant invitation, only the 7 thousand
26 matches
Mail list logo
