those
processes as well
j.
-Original Message-
From: Tim Dunphy [mailto:bluethu...@gmail.com]
Sent: Wednesday, May 02, 2012 4:27 AM
To: Discussion list for OpenIndiana
Subject: Re: [OpenIndiana-discuss] no external connectivity on link
>Ifconfig doesn't do that. Try using the LACP re
> Are you prepared for no-improvement? Ethernet link aggregation often
> disappoints people looking for more performance using IP.
It may a reasonable effect if:
1) you are already saturating the link
2) you have sufficient number of partners and they you doing large block
transfers
If you ha
Tim Dunphy wrote:
> I basically left it alone overnight and when I went back to it this
> morning I could ping external hosts from this machine and ssh into it
> on that aggregated address whereas last night I could not which is why
> I emailed the list! :)
Intermittent connectivity is a fairly go
>Ifconfig doesn't do that. Try using the LACP related commands instead. >Your
>output should look like like the following…notice how the ports are >attached,
>up, in sync, not defaulted, and not expired.
Ok, thanks for that. Here's what those commands you mentioned show:
root@openindiana:/expor
And don't forget to configure or disable the firewall.
That's what my last issue with lack of connectivity turned out to be.
It may be on and blocking by default.
On 2/05/2012 6:13 p.m., Richard Elling wrote:
On May 1, 2012, at 8:41 PM, Tim Dunphy wrote:
hello list
I have attempted to enable
On May 1, 2012, at 8:41 PM, Tim Dunphy wrote:
> hello list
>
> I have attempted to enable link aggregation on my oi 151 box using the
> command dladm create-aggr -d e1000g0 -d e1000g1 1 then I plumbed it
> with an address of 192.168.1.200 and echoed 192.168.1.1 >
> defaultrouter
>
> I noticed th
> ifconfig -a shows the aggregated link as well and all indications
> are that it's fine
Ifconfig doesn't do that. Try using the LACP related commands instead. Your
output should look like like the following
root@db031:~# dladm show-aggr -L
LINKPORT AGGREGATABLE SYNC COLL DIST
hello list
I have attempted to enable link aggregation on my oi 151 box using the
command dladm create-aggr -d e1000g0 -d e1000g1 1 then I plumbed it
with an address of 192.168.1.200 and echoed 192.168.1.1 >
defaultrouter
I noticed that my /etc directory did not have the traditional solaris
hostn
