On Thu, Feb 9, 2012 at 12:55 AM, Roy Sigurd Karlsbakk
wrote:
>> I have a Supermicro X8DTH-6F with a built-in SAS2008.
>>
>> I thought it was just an HBA, but when I went to update the firmware
>> on the card it told me it was setup as IR mode.
>>
>> I plan on flashing it to IT mode.
>>
>> Anythin
> I have a Supermicro X8DTH-6F with a built-in SAS2008.
>
> I thought it was just an HBA, but when I went to update the firmware
> on the card it told me it was setup as IR mode.
>
> I plan on flashing it to IT mode.
>
> Anything I should be aware before I do this?
If you're paranoid, export th
09.02.2012 9:34, Geoff Nordli пишет:
Was there an existing zpool setup on the card?
No. I reflash controller to IT before setup any pool.
Another note, this is on the same card where I had some "disconnects"
from a drive. I would assume there is no connection around a card
misbehaving and ha
On Wed, Feb 8, 2012 at 6:40 PM, Yuri Vorobyev wrote:
> 09.02.2012 7:42, Geoff Nordli пишет:
>
>
>> I have a Supermicro X8DTH-6F with a built-in SAS2008.
>>
>> I thought it was just an HBA, but when I went to update the firmware
>> on the card it told me it was setup as IR mode.
>>
>> I plan on fla
09.02.2012 7:42, Geoff Nordli пишет:
I have a Supermicro X8DTH-6F with a built-in SAS2008.
I thought it was just an HBA, but when I went to update the firmware
on the card it told me it was setup as IR mode.
I plan on flashing it to IT mode.
I did it on the same board without problems.
Firm
I have a Supermicro X8DTH-6F with a built-in SAS2008.
I thought it was just an HBA, but when I went to update the firmware
on the card it told me it was setup as IR mode.
I plan on flashing it to IT mode.
Anything I should be aware before I do this?
thanks,
Geoff
_
