> On 2/7/12, Marek Vasut wrote:
> > Hi,
> >
> > halt never really worked for me unless I had some additional pin
> > connected (SRST
> > I think). Check that.
>
> Is efikamx JTAG connector different from mx51evk JTAG?
>
> I would like to understand how to connect this extra pin you mentioned.
Hi James,
On Mon, Feb 6, 2012 at 11:43 PM, James Robinson wrote:
> Hello,
> I see that there is an imx53.cfg in the target directory. Is anyone
> using this with a board configuration? I am trying to connect to an
> iMX53qsb and I am getting the following errors
Which JTAG interface are you
On Sun, Feb 5, 2012 at 3:32 AM, James Robinson wrote:
> Hello again,
> I followed the Hacking documentation and created my account etc..
> When I did the "git push review" I am getting the following error.
>
> To ssh://jmr13...@openocd.zylin.com:29418/openocd.git
> ! [remote rejected] HEAD ->
I started developing my own JTAG program for my particular needs( my MIPS CPU)
It works OK for IDCODE and IMPCODE instructions. In other words my program
works well
for those instructions that does not need any input data ( no need to change
bits in EJTAG
registers).
But it does not seem to w
This is an automated email from Gerrit.
Jonathan Dumaresq (jdumar...@cimeq.qc.ca) just uploaded a new patch set to
Gerrit, which you can find at http://openocd.zylin.com/437
-- gerrit
commit 9aad6c96b5785bc9de349a4ab23cb2b9f9cdc0fb
Author: Jonathan Dumaresq
Date: Tue Feb 7 09:53:22 2012 -050
This is an automated email from Gerrit.
Jonathan Dumaresq (jdumar...@cimeq.qc.ca) just uploaded a new patch set to
Gerrit, which you can find at http://openocd.zylin.com/438
-- gerrit
commit 5462af1515fba9a109f0ca43108727f54dfebfd3
Author: Jonathan Dumaresq
Date: Tue Feb 7 09:55:34 2012 -050
Hi all,
I'm trying to use the following combination:
OpenOCD 0.5.0
FlySwatter 2
BeagleBoard XM rev. C
To connect to a running Linux kernel and debug. The desired method is to
connect OpenOCD to the target via the FlySwatter2, set a breakpoint, resume the
previously-running kernel instance,
On 2/7/12, Marek Vasut wrote:
>
> Hi,
>
> halt never really worked for me unless I had some additional pin connected
> (SRST
> I think). Check that.
Is efikamx JTAG connector different from mx51evk JTAG?
I would like to understand how to connect this extra pin you mentioned.
Thanks,
Fabio Este
On Mon, Feb 6, 2012 at 5:26 PM, Spencer Oliver wrote:
> On 5 February 2012 14:38, Flemming Frandsen wrote:
> Are you using SRST to reset the target?
Sorry, I have no clue, this is my configuration file:
jtag_khz 1
# This is the JTAG connector I use
source [find interface/olimex-arm-usb-tiny-h.c
