On Sat, Feb 11, 2012 at 2:11 PM, Ken Smith wrote:
[clip]
> Flashing and debugging with the same
> firmware worked earlier today and mysteriously stopped working.
[clip]
Here's an update. I guess soft_reset_halt doesn't reset the device
properly enough to enable debugging. Also, I added polling. T
Hi all,
I'm having trouble with basic operation with AT91SAM7X256-EK. I am
using openocd with ARM-USB-OCD. I also have a Segger J-Link that
yields similar results. I can write a program to internal flash at
0x10 but the when I resume, I can't halt. Here are some
configuration files.
openocd.c
On Feb 11, 2012 4:05 PM, "Drasko DRASKOVIC"
wrote:
>
> What would be the best format : tex, doxygen or ascii doc ? I am kind
> of opting for ascii doc, but there is already some doxy format
> documentation from Zachary Welch...
>
I would say use doxygen as it would then belong to the dev guide ra
Drasko DRASKOVIC wrote:
> > I guess this should go into openocd.texi? Could you push a patch to
> > Gerrit?
>
> This is what I promised a long time ago ;)... I'll have to put it in
> order first.
>
> What would be the best format : tex, doxygen or ascii doc ? I am
> kind of opting for ascii doc,
On Sat, Feb 11, 2012 at 3:10 PM, Peter Stuge wrote:
> Drasko DRASKOVIC wrote:
>> There is one I wrote (still not ended in the official tree) :
>
> I guess this should go into openocd.texi? Could you push a patch to
> Gerrit?
This is what I promised a long time ago ;)... I'll have to put it in
ord
Drasko DRASKOVIC wrote:
> There is one I wrote (still not ended in the official tree) :
I guess this should go into openocd.texi? Could you push a patch to
Gerrit?
//Peter
--
Virtualization & Cloud Management Using Capa
On Tue, Feb 7, 2012 at 11:11 AM, Flemming Frandsen wrote:
> This sounds promising, I'll look into it, thank you.
>
> Right, I've looked at the documentation and when I get back to my
> board, I'll try adding this to my config:
> adapter_nsrst_assert_width 10
> adapter_nsrst_delay 2
> reset_config
On Sat, Feb 11, 2012 at 10:03 AM, wrote:
> Is there any tutorial how to use OpenOCD with MIPS?
> I would like to use OpenOCD with a MIPS CPU that has
> EJTAG Implementation flags: R4k MIPS16 MIPS32
There is one I wrote (still not ended in the official tree) :
http://www.mail-archive.com/openocd-
On Sat, Feb 11, 2012 at 11:50:05AM +0100, jana1...@centrum.cz wrote:
> > > says:
> > > The following logic shamelessly cloned from HairyDairyMaid's
> > > wrt54g_debrick
> > > * to support the Broadcom BCM5352 SoC in the Linksys WRT54GL wireless
> > > router
> > > * (and any others that support
> > says:
> > The following logic shamelessly cloned from HairyDairyMaid's wrt54g_debrick
> > * to support the Broadcom BCM5352 SoC in the Linksys WRT54GL wireless
> > router
> > * (and any others that support EJTAG DMA transfers).
> [snip]
> > How was found out (it is nescessary) to use that bi
On Sat, Feb 11, 2012 at 10:46:46AM +0100, jana1...@centrum.cz wrote:
>
> says:
> The following logic shamelessly cloned from HairyDairyMaid's wrt54g_debrick
> * to support the Broadcom BCM5352 SoC in the Linksys WRT54GL wireless router
> * (and any others that support EJTAG DMA transfers).
[snip
I browsed a source codes of OpenOCD and would like to ask any
experts
A file
mips32_dmaacc.c
says:
The following logic shamelessly cloned from HairyDairyMaid's wrt54g_debrick
* to support the Broadcom BCM5352 SoC in the Linksys WRT54GL wireless router
* (and any others that support EJTAG DMA
Is there any tutorial how to use OpenOCD with MIPS?
I would like to use OpenOCD with a MIPS CPU that has
EJTAG Implementation flags: R4k MIPS16 MIPS32
Thanks
--
Virtualization & Cloud Management Using Capacity Planning
13 matches
Mail list logo
