---
** [tickets:#260] write protection not supported - nrf52840 / laird ble654 / **
**Status:** new
**Milestone:** 0.9.0
**Created:** Wed Nov 27, 2019 06:37 AM UTC by Matthias Schuh
**Last Updated:** Wed Nov 27, 2019 06:37 AM UTC
**Owner:** nobody
Dear open-ocd community,
recently ran into a problem https://pastebin.com/cgucnsWX
Cloned open-ocd from master on the 26th of November:
Running on a raspberry pi 3 cm,
Chipset to be flashed: nrf52840
built openocd like that:
git clone http://openocd.zylin.com/openocd
cd openocd
./bootstrap
./configure --enable-sysfsgpio --enable-bcm2835gpio
make
sudo make install
used the following interface config:
https://pastebin.com/JzBEzwH8
and the following openocd config:
https://pastebin.com/uPEAvKHR
I rolled back to my last documented working hash:
29c81a80510aa82b1842b15a9b091a3062cb51dc
Now it works again and the error disappeared. Did the support for the chipset
somehow break or do I have to change something in the way I configure the
Interface / openocd.
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel