Paul Fertser writes:
> On Mon, Jul 27, 2020 at 11:21:00AM +0200,
> b...@elektron.ikp.physik.tu-darmstadt.de wrote:
> > Rejecting non-ST MCU probably has also a deeper impact. The need to
> > read the MCUID! This has often problems when in sleep or even when in
> > reset. Even with stprog, STLINKV3
Paul Fertser via OpenOCD-devel writes:
> ---
>
> [tickets:#275] ST-Link v3 refuses to work with non-ST targets, RE help needed
>
> Status: new
> Milestone: 0.9.0
> Created: Fri Jul 24, 2020 04:26 PM UTC by Paul Fertser
>
Rocco Marco Guglielmi writes:
> I thought I was clear. Let me point out some statements
>
> • The code is loaded in 0x0800 (LMA) and executed at 0x0020 (VMA)
> in line with Freddie suggestion
> • The flash procedure works as expected (even after error, on target reset
> the c
Rocco Marco Guglielmi writes:
> Hello there,
> any hint?
> Ciao,
> RM
>
Get you linker script right!
It is the task of the linker command to flash at 0x0800 and to run
at the other address.
Bye
--
Uwe Bonnesb...@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik
> "Alain" == Alain Mouette writes:
Alain> Looking forward for that to become official...
Alain> Thanks to whoever is working on it :-)
Thanks from here too!
Does anybody have speed fort SWD on such a FTDI adapter?
Bye
--
Uwe Bonnesb...@elektron.ikp.physik.tu-darms
> "Matthijs" == Matthijs Kooijman writes:
Matthijs> Hi folks, I'm working with the AVR platform and have a device
Matthijs> that I can only program using JTAG. For this reason, I'd like
Matthijs> to get the AVR support in OpenOCD a bit more further along. As
Matthijs> far as I
> "Paul" == Paul Fertser writes:
Paul> BTW, stm32 discovery boards are rather cheap and powerful, and
Paul> also the stlink embedded on those can be easily reflashed to
Paul> BlackMagicProbe. And BlackMagicProbe has a passthrough mode for
Paul> raw jtag commands. It would be