Duane Ellis wrote:
> Dick> I am working on the ft232 stuff starting today.
> I am to - we should coordinate...
>
> my changes are non-trivial.
>
> -Duane.
>
>
OK, send me what you have and what your thought are to Personal Mail if
you want.
Until I get that, I have some stuff to do on xs
Dick> I am working on the ft232 stuff starting today.
I am to - we should coordinate...
my changes are non-trivial.
-Duane.
___
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/open
Duane Ellis wrote:
> All,
>
> I'm working on the patch that Jeff Williams did that updates the way the
> TMS path sequences work and have discovered an issue with the FT2232 driver.
>
> Right now, I believe I can show that given the same sets of scan
> commands - the ft2232 driver does not follow
Fab,
The AU1100 is 32 bits. I guess the 32 versus 36 bit issue could be
solved in a generic way by adding a 'variant' option.
Van: Fab Clement [mailto:clement@gmail.com]
Verzonden: vrijdag 10 april 2009 13:40
Aan: Nico Coesel
Hi
I add the same problem with an AU1200 and an Amontec that I also solved with
a polling without being satisfied. At least it worked enough to flash a
bricked box.
The AU1200 has a 36 bits ADDRESS width. What about the AU1100? Could it be
an explaination for these 5 added clocks?
Best Regards
F
Hello again,
I think I discovered a bug in the cfi driver. The board I'm working with
has 2 16 bit flash chips connected to a 32 bit bus. I configured the
flash bank as following:
flash bank cfi 0xbe00 0x200 2 4 0
The chip-width is 2 and the bus width is 4. The flashes have a 32 byte
fast
Hello,
Just a "me too" email
I have seen the issue with trying to debug thumb code on an ARM7
target. The arm_simulate_step tries to guess the "next" address to put
a breakpoint at this address but it sometime crashes.
I have tried to debug further but I have not been very succesful.
Regards
Fr
Another update on the AU1100 troubles. Adding 5 clocks after clearing
the Pracc bit solved the problem. The patch is attached to this e-mail.
Met vriendelijke groet / Best regards,
DEA bv
ing. Nico Coesel
Kweekgrasstraat 18
1313BX Almere
tel: +31 (0)36 5343888
fax: +31 (0)36 5342244
e-mail: nc
