Hi Bernard,
Bernard Mentink wrote:
> it gets to the main breakpoint ok, but then when I continue goes
> off into the weeds, please see the attached .doc file for a
> snapshot of the error in eclipse ... Seems to try to execute code
> at 0xfff0.
Even if the people you normally correspond with
Ing. Lubomir VALEK wrote:
> I ussually use SVN on other projects.
> What is different at GIT?
Very much is different with git. Please take the time to listen to
the author Linus Torvalds' talk about git:
http://www.youtube.com/watch?v=4XpnKHJAok8
> And merge is done automatically.
> Is this po
Hi,
the first patch fixes a segfault that happens at each run of
"dump_image" command.
The bug has been introduced a couple of weeks ago in commit
3931b99d142d337ea6558fd09aad2e0812c04507
The same function "handle_dump_image_command()" does not correctly
propagate errors to the caller.
The second
Merged.
Thanks!
> I still have a question on this function. Hope you can answer.
> The while() loop splits the read operation in chunks not bigger that 560
> bytes.
> From where this magic number 560 pops up? A limitation of a specific target?
> It should be documented.
I don't think there is a
I filed a bug here:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/658574
don't know if that is the best place. Your seem to have the C code
down what causes the issue in the source. I didn't go that far being
okay with just having it working again.
___
Hi,
This might be a silly question, but i was wondering what exactly the role of
OpenOCD is in debugging. I mean the internal functioning. I am assuming it
acts like a mediator and just enables debugging on a remote device. But i am
still not clear how this is done. Can anyone shed some light on t
Am 11.10.2010 22:04, schrieb Bernard Mentink:
>> # LPC2000 & LPC1700 -> SRST causes TRST
>> reset_config srst_pulls_trst
That does not work for me anymore since the "Cortex-M3 reset handling"
patch is in. Have you tried
"reset_config srst_only"?
>> target remote localhost:
Here must be a "m
B wrote:
> I filed a bug here:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/658574
> don't know if that is the best place.
You could file a bug at https://bugzilla.kernel.org/ with references
to the below discussion. That's the tracker where it should go to be
permanently resolved.
> Y
Hi Jorg,
Thanks for the reply.
I tried what you suggested, and that has helped .. However, I still have some
un-reliability related to the jtag speed setting.
If I set to 500khz, I get to the reset vector ok, but do not get to the
breakpoint at main, and the debugger goes off to the weeds.
If
On 10/12/2010 09:57 AM, Nived wrote:
>
> This might be a silly question, but i was wondering what exactly the role of
> OpenOCD is in debugging. I mean the internal functioning. I am assuming it
> acts like a mediator and just enables debugging on a remote device. But i am
> still not clear how th
> If I set to 20khz, I get perfect debugging no errors ..
I have found that the JTAG clock needs to be *really* low
when the system is running off an RC oscillator. Once on a
PLL, you can crank up the speed. This was observed on an
LPC1768, but also one other system I fail to recall which...
RCLK
Ok, thanks, although I still don't understand why the example LPC1768.cfg
script has the OSC startup at 4Mhz, and states you then can use 4Mhz/6
Which is roughly 500Khz ... But this doesn't work.
Do you, or anyone else, have a reset-init sequence (for the LPC1766/68) that
sets the PLL and cranks
On Tue, Oct 12, 2010 at 11:25 PM, Bernard Mentink
wrote:
> Ok, thanks, although I still don't understand why the example
> LPC1768.cfg script has the OSC startup at 4Mhz, and states
> you then can use 4Mhz/6
> Which is roughly 500Khz ... But this doesn't work.
You're not using the latest master b
Yes, you are correct, I was looking at an old script that had it set to 500khz.
I can put up with 10khz for debugging, but loading the image is too slow at
that speed. I can download the image at 500 khz ok.
Is there any way to download the imake at 500khz, then switch to 10khz for the
debugging
> Is there any way to download the imake at 500khz, then switch
>to 10khz for the debugging With the currect reset sequence I am using?
Look at board/mcb1700.cfg
Debugging is probably stable at higher clock rates once the PLL is running.
--
Øyvind Harboe
US toll free 1-866-980-3434 / Inter
Hi,
Ok I have tried this. I get a fast image download, but I have slow debugging as
the clock seems to get reset back to 10khz again ..
(The JTAG clock gets limited to 6Mhz by the Turlelizer2 hardware ..)
This is the dump from gdb output ..
--
target remo
> mon reset halt
Resetting turns the RC oscillator back on, and you're not running
the init script to set up the PLL again...
--
Øyvind Harboe
US toll free 1-866-980-3434 / International +47 51 63 25 00
http://www.zylin.com/zy1000.html
ARM7 ARM9 ARM11 XScale Cortex
JTAG debugger and flash prog
Ah, got you ... So I should be doing another mon reset init again?
Cheers,
Bernie
--
Hiding the Truth with "Political Correctness" is the same as Lying ... BRM
-Original Message-
From: Øyvind Harboe
Hi Øyvind,
Awesome! Well you have really helped me fix this, it all works great now
very reliable debugging ...
Many Thanks,
Bernie
---
Ah, got you ... So I should be doing another mon reset init again?
Cheers,
Bernie
---
Hi,
Am 12.10.2010 23:36, schrieb Bernard Mentink:
> Yes, you are correct, I was looking at an old script that had it set to
> 500khz.
This work for me _reliable_ on a custom lpc1768 board:
adapter_khz 500
#delays on reset lines
adapter_nsrst_delay 30
adapter_nsrst_assert_width 100
jtag_ntrst_d
Hi Jorg,
Thanks but after following Øyvind's advice and setting up the PLL , I can now
run at the maximum speed of my jtag adapter (6Mhz) ..
Cheers,
Bernie
--
Hiding the Truth with "Political Correctness"
On Wed, Oct 13, 2010 at 4:32 AM, Peter Stuge wrote:
> There was good discussion investigating the problem:
>
> http://marc.info/?l=linux-usb&m=128119592700624
>
> (read the entire thread)
>
> And on August 25 it ends with a (badly formatted) patch to revert
> the commit, which has not been include
Xiaofan Chen wrote:
> > (read the entire thread)
I really meant this.
> > has not been included in Linus' git tree. I assume because it was
> > badly formatted.
>
> I think this is not because it was badly formatted. It seems to me
> that there are different opinions whether to fix the kernel
>
On Wed, Oct 13, 2010 at 10:53 AM, Peter Stuge wrote:
> Xiaofan Chen wrote:
>> > (read the entire thread)
>
> I really meant this.
>
Yes I read the whold thread.
>> > has not been included in Linus' git tree. I assume because it was
>> > badly formatted.
>>
>> I think this is not because it was b
On Wed, Oct 13, 2010 at 11:15 AM, Xiaofan Chen wrote:
> On Wed, Oct 13, 2010 at 10:53 AM, Peter Stuge wrote:
>> See http://marc.info/?l=linux-usb&m=128276513507083 and the two
>> following messages in the thread, which come just a message or two
>> after the ones you linked to.
>>
>> The patch in
2010/10/13 Jörg Fischer :
> Hi,
> Am 12.10.2010 23:36, schrieb Bernard Mentink:
>> Yes, you are correct, I was looking at an old script that had it set to
>> 500khz.
>
> This work for me _reliable_ on a custom lpc1768 board:
>
> adapter_khz 500
>
> #delays on reset lines
> adapter_nsrst_delay 30
>
On Tue, Oct 12, 2010 at 11:59 PM, Bernard Mentink
wrote:
> Ah, got you ... So I should be doing another mon reset init again?
Depends on what you need to do. Scenario:
reset init
# loads app into flash
load
reset halt
# Now we're slow again
# debug slow startup w/slow clock
break main
c
# We can
>/ This might be a silly question, but i was wondering what exactly the role of
/>/ OpenOCD is in debugging. I mean the internal functioning. I am assuming it
/>/ acts like a mediator and just enables debugging on a remote device. But i am
/>/ still not clear how this is done. Can anyone shed som
28 matches
Mail list logo